Investigation on the low-temperature transformations of poly(furfuryl alcohol) deposited on MCM-41

Langmuir

Volumn 29, Issue 9, 2013, Pages 3045-3053

  Janus, Rafał ^a   Wach, Anna ^a   Kuśtrowski, Piotr ^a   Dudek, Barbara ^a   Drozdek, Marek ^a   Silvestre Albero, Ana Maria ^b   Rodríguez Reinoso, Francisco ^b   Cool, Pegie ^c  

^a JAGIELLONIAN UNIVERSITY   (Poland)

^b UNIVERSITY OF ALICANTE   (Spain)

^c UNIVERSITY OF ANTWERP   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

AQUEOUS SLURRIES; CALCINATION TEMPERATURE; DIKETONES; FURAN RING; FURFURYL ALCOHOL; LOW TEMPERATURES; LOW-TEMPERATURE TRANSFORMATIONS; MASS RATIO; MESOPOROUS SILICA; OUTER SURFACE; POLYFURFURYL ALCOHOLS; POLYMER CONTENT; POLYMER PARTICLES; REACTION MIXTURE; SPECTROSCOPIC TECHNIQUE; SURFACE SPECIES; TEXTURAL PARAMETERS; THERMAL TRANSFORMATIONS;

AROMATIC COMPOUNDS; CALCINATION; CARBONIZATION; DECOMPOSITION; DEPOSITS; GAS ADSORPTION; KETONES; MESOPOROUS MATERIALS; POLYCONDENSATION; TEMPERATURE; THERMOGRAVIMETRIC ANALYSIS; VOLATILE ORGANIC COMPOUNDS;

SURFACES;

EID: 84874630389     PISSN: 07437463     EISSN: 15205827     Source Type: Journal    
DOI: 10.1021/la3041852     Document Type: Article

References (69)

1. Pires, J.; Carvalho, A.; Veloso, P.; Carvalho, M. B. Preparation of dealuminated faujasites for adsorption of volatile organic compounds J. Mater. Chem. 2002, 12, 3100-3104
2. Zaitan, H.; Bianchi, D.; Achak, O.; Chafik, T. A comparative study of the adsorption and desorption of o-xylene onto bentonite clay and alumina J. Hazard. Mater. 2008, 153, 852-859
3. Hung, C. T.; Bai, H. Adsorption behaviors of organic vapors using mesoporous silica particles made by evaporation induced self assembly method Chem. Eng. Sci. 2008, 63, 1997-2005
4. Hung, C. T.; Bai, H.; Karthik, M. Ordered mesoporous silica particles and Si-MCM-41 for the adsorption of acetone: a comparative study Sep. Purif. Technol. 2009, 64, 265-272
5. Gregg, S. J.; Sing, K. S. W. Adsorption, Surface Area and Porosity; Academic Press: London, 1982.
6. Kuśtrowski, P.; Janus, R.; Kochanowski, A.; Chmielarz, L.; Dudek, B.; Piwowarska, Z.; Michalik, M. Adsorption properties of carbonized polyacrylonitrile deposited on γ-alumina and silica gel by precipitation polymerization Mater. Res. Bull. 2010, 45, 787-793
7. Marsh, H.; Rodríguez-Reinoso, F. Activated Carbon; Elsevier Science & Technology Books: London, 2006.
8. Janus, R.; Kuśtrowski, P.; Dudek, B.; Piwowarska, Z.; Kochanowski, A.; Michalik, M.; Cool, P. Removal of methyl-ethyl ketone vapour on polyacrylonitrile-derived carbon/mesoporous silica nanocomposite adsorbents Microporous Mesoporous Mater. 2011, 145, 65-73
9. Saini, K. V.; Andrade, M.; Pinto, M. L.; Carvalho, A. P.; Pires, J. How the adsorption properties get changed when going from SBA-15 to its CMK-3 carbon replica Sep. Purif. Technol. 2010, 75, 366-376
10. DaÌ̈browski, A.; Podkościelny, P.; Hubicki, Z.; Barczak, M. Adsorption of phenolic compounds by activated carbons-critical review Chemosphere 2005, 58, 1049-1070
11. Silvestre-Albero, A.; Ramos-Fernández, J. M.; Martínez- Escandell, M.; Sepúlveda-Escribano, A.; Silvestre-Albero, J.; Rodríguez-Reinoso, F. High saturation capacity of activated carbons prepared from mesophase pitch in the removal of volatile organic compounds Carbon 2010, 48, 548-556
12. Lillo-Ródenas, M. A.; Cazorla-Amorós, D.; Linares-Solano, A. Benzene and toluene adsorption at low concentration on activated carbon fibres Adsorption 2011, 17, 473-481
13. 2 adsorption by activated templated carbons J. Colloid Interface Sci. 2012, 366, 147-154
14. 2 adsorption J. Porous Mater. 2009, 16, 545-551
15. 2 adsorption capacity on carbon molecular sieves at room temperature Chem. Commun. 2011, 47, 6840-6842
16. Ahn, Ch. K.; Park, D.; Woo, S. H.; Park, J. M. Removal of cationic heavy metal from aqueous solution by activated carbon impregnated with anionic surfactants J. Hazard. Mater. 2009, 164, 1130-1136
17. Velasco, L. F.; Tsyntsarski, B.; Petrova, B.; Budinova, T.; Petrov, N.; Parra, J. B.; Ania, C. O. Carbon foams as catalyst supports for phenol photodegradation J. Hazard. Mater. 2010, 184, 843-848
18. He, J.; Ma, K.; Jin, J.; Dong, Z.; Wang, J.; Li, R. Preparation and characterization of octyl-modified ordered mesoporous carbon CMK-3 for phenol adsorption Microporous Mesoporous Mater. 2009, 121, 173-177
19. Calvillo, L.; Cellorio, V.; Moliner, R.; Lázaro, M. J. Influence of the support on the physicochemical properties of Pt electrocatalysts: Comparison of catalysts supported on different carbon materials Mater. Chem. Phys. 2011, 127, 335-341
20. Salgado, J. R. C.; Alcaide, F.; álvarez, G.; Calvillo, L.; Lázaro, M. J. Pt-Ru electrocatalysts supported on ordered mesoporous carbon for direct methanol fuel cell J. Power Sources 2010, 195, 4022-4029
21. Zhang, H.; Tao, H.; Jiang, Y.; Jiao, Z.; Wu, M.; Zhao, B. Ordered CoO/CMK-3 nanocomposites as the anode materials for lithium-ion batteries J. Power Sources 2010, 195, 2950-2955
22. Yang, M.; Gao, Q. Copper oxide and ordered mesoporous carbon composite with high performance using as anode material for lithium-ion battery Microporous Mesoporous Mater. 2011, 143, 230-235
23. Yue, Z.; Economy, J.; Bordson, G. Preparation and characterization of NaOH-activated carbons from phenolic resin J. Mater. Chem. 2006, 16, 1456-1461
24. Nakagawa, K.; Mukai, S. R.; Tamura, K.; Tamon, H. Mesoporous activated carbons from phenolic resins Chem. Eng. Res. Des. 2007, 85, 1331-1337
25. Tennison, S. R. Phenolic-resin-derived activated carbons Appl. Catal., A 1998, 173, 289-311
26. Miyake, T.; Hanaya, M. Carbon-coated material with bimodal pore-size distribution J. Mater. Sci. 2002, 37, 907-910
27. Chiang, H. L.; Chiang, P. C.; Chiang, Y. C.; Chang, E. E. Diffusivity of microporous carbon for benzene and methyl-ethyl ketone adsorption Chemosphere 1999, 38, 2733-2746
28. Przepiórski, J.; Tryba, B.; Morawski, A. W. Adsorption of carbon dioxide on phenolic resin-based carbon spheres Appl. Surf. Sci. 2002, 196, 296-300
29. Kim, M. I.; Yun, C. H.; Kim, Y. J.; Park, C. R.; Inagaki, M. Changes in pore properties of phenol formaldehyde-based carbon with carbonization and oxidation conditions Carbon 2002, 40, 2003-2012
30. Leboda, R.; Skubiszewska-ZieÌ̈ba, J.; Tomaszewski, W.; Gun'ko, V. M. Structural and adsorptive properties of activated carbons prepared by carbonization and activation of resins J. Colloid Interface Sci. 2003, 263, 533-541
31. Chen, X.; Jeyaseelan, S.; Graham, N. Physical and chemical properties study of the activated carbon made from sewage sludge Waste Manage. 2002, 22, 755-760
32. Yardim, M. F.; Budinova, T.; Ekinci, E.; Petrov, N.; Razvigoroba, M.; Minkova, V. Removal of mercury(II) from aqueous solution by activated carbon obtained from furfural Chemosphere 2003, 52, 835-841
33. Sedghi, A.; Farsani, R. E.; Shokuhfar, A. The effect of commercial polyacrylonitrile fibers characterizations on the produced carbon fibers properties J. Mater. Process. Technol. 2008, 198, 60-67
34. Gierszal, K. P.; Jaroniec, M.; Kim, T.-W.; Kim, J.; Ryoo, R. High temperature treatment of ordered mesoporous carbons prepared by using various carbon precursors and ordered mesoporous silica templates New J. Chem. 2008, 32, 981-993
35. Hirano, Sh. I.; Ozawa, M.; Naka, Sh. Formation of non-graphitizable isothropic spherulitic carbon from poly-divinylbenzene by pressure hydrolysis J. Mater. Sci. 1981, 16, 1989-1993
36. 2 hybrid materials Polym. Degrad. Stab. 2009, 94, 908-913
37. Yao, J.; Wang, H.; Liu, J.; Chan, K.-Y.; Zhang, L.; Xu, N. Preparation of colloidal microporous carbon spheres from furfuryl alcohol Carbon 2005, 43, 1709-1715
38. Men, X. H.; Zhang, Z. Z.; Song, H. J.; Wang, K.; Jiang, W. Functionalization of carbon nanotubes to improve the tribological properties of poly(furfuryl alcohol) composite coatings Compos. Sci. Technol. 2008, 68, 1042-1049
39. Cheng, L. T.; Tseng, W. J. Effect of acid treatment on structure and morphology of carbons prepared from pyrolysis of polyfurfuryl alcohol J. Polym. Res. 2010, 17, 391-399
40. Glover, T. G.; Dunne, K. I.; Davis, R. J.; LeVan, M. D. Carbon-silica composite adsorbent: Characterization and adsorption of light gases Microporous Mesoporous Mater. 2008, 111, 1-11
41. Príncipe, M.; Suárez, H.; Jimenez, G. H.; Martínez, R.; Spange, S. Composites prepared from silica gel and furfuryl alcohol with p-toluenesulphonic acid as the catalyst Polym. Bull. 2007, 58, 619-626
42. Shi, L.; Yao, J.; Jiang, J.; Zhang, L.; Xu, N. Preparation of mesopore-rich carbons using attapulgite as templates and furfuryl alcohol as carbon source through a vapor deposition polymerization method Microporous Mesoporous Mater. 2009, 122, 294-300
43. Müller, H.; Rehak, P.; Jäger, Ch.; Hartmann, J.; Meyer, N.; Spange, S. A concept for the fabrication of penetrating carbon/silica hybrid materials Adv. Mater. 2000, 12, 1671-1674
44. Nabais, J. M. V.; Carrott, P. J. M.; Ribeiro Carrott, M. M. L. From commercial textile fibres to activated carbon fibres: Chemical transformations Mater. Chem. Phys. 2005, 93, 100-108
45. Rahaman, M. S. A.; Ismail, A. F.; Mustafa, A. A review of heat treatment on polyacrylonitrile fiber Polym. Degrad. Stab. 2007, 92, 1421-1432
46. Jing, M.; Wang, C.; Wang, Q.; Bai, Y.; Zhu, B. Chemical structure evolution and mechanism during pre-carbonization of PAN-based stabilized fiber in the temperature range of 350-600 C Polym. Degrad. Stab. 2007, 92, 1737-1742
47. Wangxi, Z.; Jie, L.; Gang, W. Evolution of structure and properties of PAN precursors during their conversion to carbon fibers Carbon 2003, 41, 2805-2812
48. Vitkovskaya, R. F.; Rumynskaya, I. G.; Smirnov, A. Yu. Structural transformations in polyacrylonitrile during modification and fabrication of fibers and films with catalytic properties Fibre Chem. 2008, 40, 202-205
49. Toda, M.; Takagaki, A.; Okamura, M.; Kondo, J. N.; Hajashi, S.; Domen, K.; Hara, M. Biodiesel made with sugar catalyst Nature 2005, 438, 178
50. Fang, L.; Zhang, K.; Li, X.; Wu, H.; Wu, P. Preparation of a carbon-silica mesoporous composite functionalized with sulfonic acid groups and its application to the production of biodiesel Chin. J. Catal. 2012, 33, 114-122
51. Xing, R.; Liu, Y.; Wang, Y.; Chen, L.; Wu, H.; Jiang, Y.; He, M.; Wu, P. Active solid acid catalysts prepared by sulfonation of carbonization-controlled mesoporous carbon materials Microporous Mesoporous Mater. 2007, 105, 41-48
52. Nakajima, K.; Okamura, M.; Kondo, J. N.; Domen, K.; Tatsumi, T.; Hayashi, S.; Hara, M. Amorphous carbon bearing sulfonic acid groups in mesoporous silica as a selective catalyst Chem. Mater. 2009, 21, 186-193
53. Liu, Y.; Chen, J.; Yao, J.; Lu, Y.; Zhang, L.; Liu, X. Preparation and properties of sulfonated carbon-silica composites from sucrose dispersed on MCM-48 Chem. Eng. J. 2009, 148, 201-206
54. Kruk, M.; Dufour, B.; Celer, E. B.; Kowalewski, T.; Jaroniec, M.; Matyjaszewski, K. Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor J. Phys. Chem. B 2005, 109, 9216-9225
55. Martín, A.; Morales, G.; van Grieken, R.; Cao, L.; Kruk, M. Acid hybrid catalysts from poly(styrenesulfonic acid) grafted onto ultra-large-pore SBA-15 silica using atom transfer radical polymerization J. Mater. Chem. 2010, 20, 8026-8035
56. Li, C.; Yang, J.; Wang, P.; Liu, J.; Yang, Q. An efficient solid acid catalyst: Poly- p -styrenesulfonic acid supported on SBA-15 via surface-initiated ATRP Microporous Mesoporous Mater. 2009, 123, 228-233
57. Zhai, Y.; Tu, B.; Zhao, D. Organosilane-assisted synthesis of ordered mesoporous poly(furfuryl alcohol) composites J. Mater. Chem. 2009, 19, 131-140
58. Liu, Y.; Ju, M.; Wang, C.; Zhang, L.; Liu, X. Preparation of monodisperse mesoporous carbon microspheres from poly-(furfuryl alcohol)-silica composite microspheres produced in a microfluidic device J. Mater. Chem. 2011, 21, 15049-15056
59. Gierszal, K. P.; Jaroniec, M. Large pore volume carbons with uniform mesopores and macropores: Synthesis, characterization, and relations between adsorption parameters of silica templates and their inverse carbon replicas J. Phys. Chem. C 2007, 111, 9742-9748
60. Kruk, M.; Jaroniec, M.; Kim, T. W.; Ryoo, R. Synthesis and characterization of hexagonally ordered carbon nanopipes Chem. Mater. 2003, 15, 2815-2823
61. Burket, C. L.; Rajagopalan, R.; Marencic, A. P.; Dronvajjala, K.; Foley, H. C. Genesis of porosity in polyfurfuryl alcohol derived nanoporous carbon Carbon 2006, 44, 2957-2963
62. 13C NMR study in curing furfuryl alcohol resins Macromolecules 1984, 17, 1087-1090
63. Smith, M. A.; Foley, H. C.; Lobo, R. F. A simple model describes the PDF of a non graphitizing carbon Carbon 2004, 42, 2041-2048
64. Eckert, H.; Levendis, Y. A.; Flagant, R. C. Glassy carbons from poly(furfuryl alcohol) copolymers: structural studies by high-resolution solid state NMR techniques J. Phys. Chem. 1988, 92, 5011-5019
65. Kumar, A.; Lobo, R. F.; Wagner, N. J. Porous amorphous carbon models from periodic Gaussian chains of amorphous polymers Carbon 2005, 43, 3099-3111
66. Mariwala, R. K.; Foley, H. C. Evolution of ultramicroporous adsorptive structure in poly(furfuryl alcohol)-derived carbogenic molecular sieves Ind. Eng. Chem. Res. 1994, 33, 607-615
67. Li, G.; Lu, Z.; Huang, B.; Wang, Z.; Huang, H.; Xue, R.; Chen, L. Raman scattering investigation of carbons obtained by heat treatment of a polyfurfuryl alcohol Solid State Ionics 1996, 89, 327-331
68. Wang, Z.; Lu, Z.; Huang, Y.; Xue, R.; Huang, X.; Chen, L. Characterizations of crystalline structure and electrical properties of pyrolyzed polyfurfuryl alcohol J. Appl. Phys. 1997, 82, 5705-5710
69. Kotdawala, R. R. Adsorption Studies of Hazardous Air Pollutants in Microporous Adsorbents using Statistical and Molecular Simulation Techniques. Ph.D. Dissertation, Worcester Polytechnic Institute, MA, 2007.