Motion control with induction motors

Power Electronics and Variable Frequency Drives: Technology and Applications

Volumn , Issue , 1996, Pages 209-276

  Lorenz, R D ^a   Lipo, L A ^a   Novotny, D W ^a  

^a NONE

Author keywords

Commutation; DC motors; Induction motors; Inverters; Switches; Thyristors; Transistors

Indexed keywords

EID: 84874473091     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1109/9780470545553.ch5     Document Type: Chapter

References (59)

1. Novotny, D. W., “A comparative study of variable frequency drives for energy conservation applications,” University of Wisconsin Report #/ECE-81-4, 1981.
2. Davis, R. M., “Inverter-fed induction machines,” Proc. Of Drives!Motors! Controls ’82, Leeds, England, pp. 66-75, 29 June-1 July 1982.
3. Lipo, T. A., and F. G. Turnbull, “Analysis and comparison of two types of square wave inverter drives,” IEEE Trans, on Industry Applications, Vol. Ia-11, no. 2, pp. 137-147, March/April 1975.
4. Houldsworth, J. A., and W. B. Rosink, “Introduction to PWM speed control system for 3-phase AC motors,” Electronics Components and Applications, Vol. 2, no. 2, February 1980.
5. Bowes, S. R., “New sinusoidal pulse width-modulated inverter,” Proc. Iee, Vol. 122, pp. 1279-1285, November 1975.
6. Lorenz, R. D., “Microprocessor control of motor drives and power converters,” Chapter 4, Microprocessor Motion Control of AC and DC Drives, IEEE Tutorial Course Note Book from 1991, ’92 & ’93 IEEE, IAS Annual Meetings, IEEE Publishing Services #TH0587-6.
7. Lorenz, R. D., and K. Vanpatten, “High resolution velocity estimation,” IEEE Trans. In. Appl., Vol. 27, no. 4, pp. 701-708, July/August 1991.
8. Schmidt, P. B., and R. D. Lorenz, “Design principles and implementation of acceleration feedback to improve performance of DC drives,” IEEE Trans. Ind. Appl., pp. 594-599, May/June 1992.
9. Moatemri, M. H., P. B. Schmidt, and R. D. Lorenz, “Implementation of a DSP-based, acceleration feedback robot controller: Practical issues and design limits,” IEEE-IAS Conf. Rec., pp. 1425-1430, 1991.
10. Hasse, K., “Zur dynamik drehzahlgeregelter antriebe mit stromrichtergespeisten asynchron-kurzschlublaufermaschinen,” Ph.D. Dissertation, Tech. Hochschule Darmstadt, July 17, 1969.
11. Blaschke, F., “The principle of field orientation as applied to the new transvector closed loop control for rotating machines,” Siemens Review, Vol. 39, no. 5, pp. 217-220, 1972.
12. de Doncker, R., and D. W. Novotny, “The universal field oriented controller,” IEEE-IAS Annual Meeting Conf. Rec., pp. 450-456, October 1988.
13. Xu, X., and D. W. Novotny, “Selection of the flux reference for induction machines in the field weakening region,” IEEE Trans. Ind. Appl., Vol. 28, no. 6, pp. 1353-1358, November/December 1992.
14. Nordin, K. B., D. W. Novotny, and D. S. Zinger, “The influence of motor parameter deviations in feedforward field orientation drive systems,” IEEE-IAS Trans., Vol. Ia-21, no. 4, pp. 1009-1015, July/August 1985.
15. Lorenz, R. D., and D. W. Novotny, “Optimal utilization of induction machines in field oriented drives,” J. Electrical and Electronic Engin., Australia, Vol. 10, no. 2, pp. 95-100, June 1990.
16. Wallace, I. T., D. W. Novotny, R. D. Lorenz, and D. M. Divan, “Increasing the dynamic torque per ampere capability of induction machines,” IEEE-IAS Conf. Rec., pp. 14-20, 1991.
17. Brod, D. M., and D. W. Novotny, “Current control of VSI-PWM inverters,” IEEE Trans. Ind. Appl., Vol. Ia-21, no. 4, pp. 562-570, May/June 1985.
18. Brod, D. M., “Current control of VSI-PWM inverters,” M.S.E.E. Thesis, University of Wisconsin, 1984.
19. Rowan, T., “Analysis of naturally sampled current regulated pulse width modulated inverters,” Ph.D. Thesis, University of Wisconsin, 1985.
20. Salama, S., and S. Lennon, “Overshoot and limit cycle free current control method for PWM inverters,” European Power Electronics Conference, Florence, pp. 3-247-3-251, 1991.
21. Schauder, C. D., and R. Caddy, “Current control of voltage-source inverters for fast four-quandrant drive performance,” IEEE Trans. Ind. Appl., Vol. Ia-18, no. 2, pp. 163-171, March/April 1982.
22. Rowan, T., and R. Kerkman, “A new synchronous current regulator and an analysis of current-regulated PWM inverters,” IEEE Trans. Ind. Appl., Vol. Ia-22, no. 4, pp. 678-690, July/August 1986.
23. Holtz, J., and S. Stadtfeld, “A predictive controller for the stator current vector of AC machines fed from a switched voltage source,” Int. Power Electronics Conf., Tokyo, pp. 1665-1675, March 27-31, 1983.
24. Nabae, A., S. Ogasawara, and H. Akagi, “A novel control scheme for currentcontrolled PWM inverters,” IEEE Trans. Ind. Appl., Vol. Ia-22, no. 4, pp. 697-701, July/August 1986.
25. Habetler, T. G., and D. M. Divan, “Performance characterization of a new, discrete pulse modulated current regulator,” IEEE-IAS Annual Meeting Conf. Rec., pp. 395-403, October 1988.
26. Böcker, J., and J. Janning, “Discrete-time flux observer for PWM fed induction motors,” Proc. Epe, Florence, pp. 171-176, 1991.
27. Bottura, C. P., J. L. Silvino, and P. Resende, “A flux observer for induction machines based on a time-variant discrete model,” Proc. Apec, 1991.
28. Franceschini, G., C. Tassoni, and A. Vagati, “Flux estimation for induction servo motors,” Proc. Ipec-Tokyo, pp. 1227-1234, 1990.
29. Franceschini, G., M. Pastorelli, F. Profumo, C. Tassoni, and A. Vagati, “About the gain choice of flux observer in induction servo motors,” Proc. Ieee-IAS Annual Meeting, pp. 601-606, 1990.
30. Hori, Y., V. Cotter, and Y. Kaya, “A novel induction machine flux observer and its application to a high performance AC drive system,” IF AC 10th Triennial World Congress, Munich, FRG, pp. 363-368, 1987.
31. Hori, Y., and T. Umeno, “Implementation of robust flux observer based field orientation (FOFO) controller for induction machines,” Proc. Ieee-IAS Annual Meeting, pp. 523-528, 1989.
32. Hori, Y., and T. Umeno, “Flux observer based field orientation (FOFO) controller for high performance torque control,” Proc. Ipec-Tokyo, pp. 1219-1226, 1990.
33. Jansen, P. L., and R. D. Lorenz, “A physically insightful approach to the design and accuracy assessment of flux observers for field oriented induction machine drives,” Proc. Ieee-IAS Annual Meeting, pp. 570-577, October 1992.
34. Jansen, P. L., C. O. Thompson, and R. D. Lorenz, '‘Observer-based direct field orientation for both zero and very high speed operation,” Proc. Pcc-Yokohama, Japan, pp. 432-437, April 1993.
35. Jansen, P. L., and R. D. Lorenz, “Accuracy limitations for velocity and flux estimation in direct field oriented induction machines,” Proc. Epe Conf, Brighton, UK, September 1993.
36. Jansen, P. L., R. D. Lorenz, and D. W. Novotny, “Observer-based direct field orientation: Analysis and comparison of alternative methods,” Proc. Ieee-IAS Annual Meeting, Toronto, pp. 536-543, October 1993.
37. Kubota, H., and K. Matsuse, “Flux observer of induction motor with parameter adaption for wide speed range motor drives,” Proc. Ipec-Tokyo, pp. 1213-1218, 1990.
38. Kubota, H., K. Matsuse, and T. Nakano, “DSP-based speed adaptive flux observer of induction motor,” Proc. Ieee-IAS Annual Meeting, pp. 380-384, 1991.
39. Matsuse K., and H. Kubota, “Deadbeat flux level control of high power saturated induction servo motor using rotor flux observer,” Proc. Ieee-IAS Annual Meeting, pp. 409-414, October 1991.
40. Nilsen, R., and M. P. Kazmierkowski, “New reduced-order observer with parameter adaption for flux estimation in induction motors,” PESC, pp. 245-252, 1992.
41. Xu, X., R. De Doncker, and D. W. Novotny, “A stator flux oriented induction machine drive,” 1988 Power Electronics Specialist's Conference, Kyoto, Japan, pp. 870-876, April 1988.
42. Xu, X., R. De Doncker, and D. W. Novotny, “Stator flux orientation control of induction machines in the field weakening region,” Proc. Ieee-IAS Annual Meeting, pp. 437-443, October 1988.
43. Xu, X., and D. W. Novotny, “Implementation of direct stator flux orientation control on a versatile DSP based system,” Proc. Ieee-IAS Annual Meeting, October 1990.
44. Bendat, J. S., and A. G. Piersol, Random Data: Analysis and Measurement Procedures, Wiley-Interscience, New York, 1971.
45. Box, G. E. P., and G. M. Jenkins, Time Series Analysis, Forecasting and Control, Holden Day, San Francisco, 1970.
46. Holtz, J., and T. Thimm, “Identification of machine parameters in a vector controlled induction motor drive,” Conf. Rec. Ieee-IAS Annual Meeting, San Diego, pp. 601-606, October 1989.
47. Vélez-Reyes, M., K. Minami, and G. C. Verghese, “Recursive speed and paramter estimation for induction machines,” Conf. Rec. Ieee-IAS Annual Meeting, San Diego, pp. 607-611, October 1989.
48. Borgard, D. E., G. Olsson, and R. D. Lorenz, “Accuracy issues for parameter estimation of field oriented induction machine drives,” Conf. Rec. Of the IEEE-IAS Annual Meeting, Denver, pp. 503-600, October 2-6, 1994.
49. Matsuo, T., and T. A. Lipo, “A rotor parameter identification scheme for vector-controlled induction motor drives,” IEEE Trans. Ind. Appl., Vol. 21, no. 4, pp. 624-632, May/June 1985.
50. Wang, C., D. W. Novotny, and T. A. Lipo, “An automated rotor time constant measurement system for indirect field-oriented drives,” IEEE Trans. Ind. Appl., Vol. 24, no. 1, pp. 151-159, January/February 1988.
51. Lorenz, R. D., and D. B. Lawson, “A simplified approach to continuous, online tuning of field oriented induction machine drives,” IEEE Trans. Ind. Appl, Vol. 26, no. 3, pp. 420-425, May/June 1990.
52. Garces, L. J., “Parameter adaption for the speed-controlled static AC drive with a squirrel-cage induction motor,” IEEE Trans. Ind. Appl., Vol. 16, no. 2, pp. 173-178, March/April 1980.
53. Zai, L. C., and T. A. Lipo, “An extended kalman filter approach to rotor time constant measurement in PWM induction motor drives,” 1987 IEEE Industry Applications Soc. Annual Meeting, October 1987.
54. Sugimoto, H., and S. Tamai, “Secondary resistance identification of an induction-motor applied model reference adaptive system and its characteristics,” IEEE Trans. Ind. Appl, Vol. 23, no. 2, pp. 296-303, March/April 1987.
55. Rowan, T. M., R. J. Kerkman, and D. Leggate, “A simple on-line adaption for indirect field orientation of an induction machine,” 1989 IEEE Industry Applications Soc. Annual Meeting, pp. 579-587, 1989.
56. Hung, K. T., and R. D. Lorenz, “A rotor flux error-based adaptive tuning approach for feedforward field-oriented induction machine drives,” 1990 IEEE Industry Applications Soc. Annual Meeting, pp. 589-594, October 1990.
57. Hung, K. T., “A slip gain error model-based correction scheme of near-deadbeat response for indirect field orientation,” Master’s thesis, University of Wisconsin-Madison, 1990.
58. Moreira, J. C., “A study of saturation harmonics with applications in induction motor drives,” Ph.D. Thesis, University of Wisconsin-Madison, 1990.
59. Moreira, J. C., K. T. Hung, T. A. Lipo, and R. D. Lorenz, “A simple and robust adaptive controller for deturning correction in field oriented induction machines,” IEEE Trans. Ind. Appl., pp. 1359-1366, November/December 1992.