Application of acoustic emission method to determine critical stress in fibre reinforced mortar beams

Archives of Acoustics

Volumn 37, Issue 3, 2012, Pages 261-268

  Ranachowski, Zbigniew ^a   Jóźwiak Niedźwiedzka, Daria ^a   Brandt, Andrzej M ^a   Dȩbowski, Tomasz ^a  

^a INSTITUTE OF FUNDAMENTAL TECHNOLOGICAL RESEARCH   (Poland)

Author keywords

Acoustic Emission; Concrete microstructure; Critical stress; Fly ash; Microcracking; Self healing

Indexed keywords

ACOUSTIC EMISSION METHOD; APPLIED LOADS; CEMENT REPLACEMENT; CONSECUTIVE LOADINGS; CRACK-HEALING; CRITICAL STRESS; ELECTRON SCANNING MICROSCOPES; ENERGY DISPERSIVE X-RAY; FIBRE REINFORCED; FOUR-POINT BENDING; FOUR-POINT BENDING TEST; GROWTH PROCESS; HIGH-CALCIUM FLY ASH; LOAD CAPACITY; MEASURING PROCEDURE; MICRO-STRUCTURAL CHARACTERIZATION; MICROFIBRES; MORTAR BEAMS; OPTICAL MICROSCOPES; PRE-CRACKING; REPEATED LOADS; SELF-HEALING; STANDARD CONDITIONS;

ACOUSTIC EMISSION TESTING; ACOUSTIC EMISSIONS; CRACK PROPAGATION; CRACKS; CURING; FLY ASH; MICROCRACKING; MICROSTRUCTURE; REINFORCEMENT;

MORTAR;

EID: 84873872147     PISSN: 01375075     EISSN: None     Source Type: Journal    
DOI: 10.2478/v10168-012-0034-3     Document Type: Article

References (26)

1. Abrams D.A. (1917), Effects of rate of application of load on the compressive strength of concrete, Amer. Soc. For Testing of Materials, Proc. 17, part II, 364-377.
2. Arrington M., Evans B.M. (1977), Acoustic emis-sion testing of high alumina cement concrete, NDT Int., 10, 2, 81-87.
3. Golewski G., Sadowski T. (2007), Analysis of brittle damages in concrete composites [in Polish], Proc. of Cracow University of Technology, Civil Engineering, 1-B, 4, 55-62.
4. Granger S., Pijaudier G., Loukili A., Mar-lot D., Lenain J.C. (2009), Monitoring of cracking and healing in an ultra high performance cementitious material using the time reversal technique, Cem. & Concr. Res., 39, 296-302.
5. Gray R.J. (1984), Autogeneous healing of fibre/matrix interfacial bond in fibre-reinforced mortar, Cem. & Concr. Res., 14, 315-317.
6. Hannant D.J., Edgington J. (1975), Durability of steel fibre concrete, [in:] Proc. RILEM Symp. "Fibre reinforced cement and concrete", Lancaster; Construc-tion Press, 159-169.
7. Hannant D.J., Keer J.G. (1983), Autogeneous healing of thin cement based sheets, Cem. & Concr. Res., 13, 533-538.
8. Hoła J. (1999), Acoustic Emission investigation of failure of high-strength concrete, Archives of Acoustics, 24, 2, 233-244.
9. Hosoda A., Komatsu S., Ahn T., Kishi T., Ike-no S., Kobayashi K. (2009), Self healing proper-ties with various crack widths under continuous water leakage, in: Concr. Repair, Rehab. and Retrofit., II, Alexander et al. [Eds.], Taylor and Francis, 221-227.
10. Jacobsen S., Sellevold E.J. (1996), Self healing of high strength concrete after deterioration by freeze/thaw, Cem. & Concr. Res., 26, 1, 55-62.
11. Jóźwiak-Niedźwiedzka D., Gibas K., Glini-cki M.A., Nowowiejski G. (2011), Tightness of the concretes with high calcium fly ash admixture in rela-tion to diffusion of aggressive agents [in Polish: Drogi i Mosty], Journal of Polish Institute of Roads and Bridges, 3, 39-61.
12. Jóźwiak-Niedźwiedzka D., Brandt A.M., Rana-chowski Z. (2012), Self-healing of cracks in fibre re-inforced mortar beams made with high calcium fly ash, Cement, Wapno, Beton (www.cementwapnobeton.pl), 1, 38-49.
13. Kasperkiewicz J., Stroeven P. (1991), Observa-tions on crack healing in concrete, [in:] Proc. Int. Symp. "Brittle Matrix Composites 3" Warszawa, Appl. Sc. Publ., 164-173.
14. Marks M., Jóźwiak-Niedźwiedzka D., Glinic-ki M.A. (2012), Automatic categorization of chloride migration into concrete modified with CFBC ash, Com-puters and Concrete, 9, 5, 375-387.
15. Mor A., Monteiro P.J.M., Hester W.T. (1989), Observations of healing of cracks in high-strength lightweight concrete, Cem. Concr. and Aggr., 11, 2, 121-125.
16. Ohtsu M. (1996), The history and development of acoustic emission in concrete engineering, Magazine of Concrete Res., 48, 321-330.
17. Ouyang C.S., Landis E., Shah S.P. (1991), Dam-age assesment in concrete using quantitative acoustic emission, J. Eng. Mech., 117, 11, 2681-2698.
18. Qjan S.Z., Zhou J., Schlangen E. (2010), Influence of curing condition and precracking time on the self-healing behavior of Engineered Cementitious Compos-ites, Cem. & Concr. Comp., 32, 686-693.
19. Ranachowski P., Rejmund F., Ranachowski Z., Pawełek A., Pia̧tkowski A. (2009), Comparison of Acoustic Emission and Structure Degradation in Com-pressed Porcelain and Corrundum Materials, Archives of Acoustics, 34, 4, 566-676.
20. Reinhardt H.W., Jooss M. (2003), Permeability and self-healing of cracked concrete as a function of temper-ature and crack width, Cem. & Concr. Res., 33, 981-985.
21. Ruesch H. (1959), Physical problems in the testing of concrete, Zement, Kalk, Gips, 12, 1, 1-9.
22. Şahmaran M., Keskin S.B., Ozerkan G., Ya-man I.O. (2008), Self-healing of mechanically-loaded self consolidating concretes with high volumes of fly ash, Cem. & Concr. Comp., 30, 872-879.
23. Schiessl P., Reuter C. (1992), Massgebende Ein-flussgrössen auf die Wasserdurchlässigkeit von gerisse-nen Stahlbetonbauteilen, Ann. Report, Institüt für Bau-forschung, Aachen, 223-228.
24. Tsimas S., Moutsatsou-Tsima A. (2005), High-calcium fly ash as the fourth constituent in concrete: problems, solutions, and perspectives, Cem. Concr. Comp., 27, 231-237.
25. Wenhui Zhong, Wu Yao (2008), Influence of dam-age degree on self-healing of concrete, Constr. & Build. Materials, 22, 1137-1142.
26. Yuyama S., Ohtsu M. (2000), Acoustic Emission evaluation in concrete [in:] Kishi T., Ohtsu M., Yuyama S. [Eds.], Acoustic Emission-Beyond the Mil-lennium, Elsevier, 187-213.