Large-signal measurements and nonlinear characterization of an analog frontend for passive UHF CMOS RFID transponders

IEEE Transactions on Microwave Theory and Techniques

Volumn 61, Issue 2, 2013, Pages 948-959

  Essel, Jochen ^a   Brenk, Daniel ^a   Heidrich, Juergen ^b   Weigel, Robert ^c   Kissinger, Dietmar ^c  

^a Technologies   (Germany)

^b NOKIA RESEARCH CENTER   (United States)

^c UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Analog frontend; large signal measurement; nonlinear; radio frequency identification (RFID); source pull; ultra high frequencies (UHF)

Indexed keywords

ANALOG FRONT-END; LARGE-SIGNALS; NONLINEAR; SOURCE-PULL; ULTRA-HIGH-FREQUENCIES (UHF);

CHARACTERIZATION; TRANSPONDERS;

RADIO FREQUENCY IDENTIFICATION (RFID);

EID: 84873407778     PISSN: 00189480     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMTT.2012.2231422     Document Type: Article

References (39)

1. R. Weigel, K. Seemann, and L. Reindl, "CMOS and SAW RFID tags at UHF frequencies," in Proc. Symp. Acoustic Wave Devices Future Mobile Comm. Syst., Mar. 2007, pp. 21-29.
2. K. Finkenzeller, RFID Handbuch, 4th ed. Munich, Germany: Hanser Fachbuchverlag, 2006.
3. J. Heidrich, D. Brenk, J. Essel, S. Schwarzer, K. Seemann, G. Fischer, and R. Weigel, "The roots, rules, and rise of RFID," IEEE Microw. Mag., vol. 11, no. 3, pp. 78-86, May 2010.
4. B. Jiang, J. R. Smith,M. Philipose, S. Roy, K. Sundara-Rajan, andA.V. Mamishev, "Energy scavenging for inductively coupled passive RFID systems," IEEE Trans. Instrum. Meas., vol. 56, no. 1, pp. 118-125, Jan. 2007. (Pubitemid 46344517)
5. U. Karthaus and M. Fischer, "Fully integrated passive UHF RFID transponder IC with 16.7 W minimum RF input power," IEEE J. Solid-State Circuits, vol. 38, no. 10, pp. 1602-1608, Oct. 2003.
6. V. Pillai, H. Heinrich, D. Dieska, P. V. Nikitin, R. Martinez, and K. V. S. Rao, "An ultra-low-power long range battery/passive RFID tag for UHF and microwave bands with a current consumption of 700 nA at 1.5 V," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 54, no. 7, pp. 1500-1512, Jul. 2007. (Pubitemid 47108127)
7. K. Seemann and R. Weigel, "The system design of integrated passive transponder devices," in Proc. Asia-Pac. Microw. Conf. (APMC), Dec. 2006, pp. 1114-1117.
8. "Measurement of large signal device input impedance during load pull," Maury Microwave Corporation, Appl. Note 5C-029, 1998.
9. "Theory of load and source pull measurement," Maury Microwave Corporation, Appl. Note 5C-041, 1999.
10. S. Dudkiewicz, "Tracing the evolution of load-pull methods," Maury Microwave Corporation, Appl. Note 5a-050, Oct. 2010.
11. P. V. Nikitin, K. V. S. Rao, S. F. Lam, V. Pillai, R. Martinez, and H. Heinrich, "Power reflection coefficient analysis for complex impedances in RFID tag design," IEEE Trans. Microw. Theory Tech., vol. 53, no. 9, pp. 2721-2725, Sep. 2005. (Pubitemid 41633195)
12. P. V.Nikitin, K. V. S. Rao, R.Martinez, and S. F. Lam, "Sensitivity and impedance measurements of UHF RFID chips," IEEE Trans. Microw. Theory Tech., vol. 57, no. 5, pp. 1297-1302, May 2009.
13. S.-L. Chen, K.-H. Lin, and R. Mittra, "A measurement technique for verifying the match condition of assembled RFID tags," IEEE Trans. Instrum. Meas., vol. 59, no. 8, pp. 2123-2133, Aug. 2010.
14. R. Kronberger, A. Geissler, and B. Friedmann, "New methods to determine the impedance of UHF RFID chips," in Proc. IEEE Int. Conf. RFID, 2010, pp. 260-265.
15. S. Gruber, H. Reinisch, H. Unterassinger, M. Wiessflecker, G. Hofer, M. Klamminger, W. Pribyl, and G. Holweg, "A passively powered BAW-based multi-standard in-tire identification and monitoring system," in Proc. 7th Int Commun. Syst. Netw. Digital Signal Process. (CSNDSP) Symp., 2010, pp. 300-304.
16. K. Seemann, "Analyse und verhaltensmodellierung des HF-frontends von passiven CMOS-transpondern fuer UHF-RFID-anwendungen," Ph.D. dissertation, Inst. Electron. Eng., Univ. Erlangen-Nuremberg, Erlangen, Germany, 2007.
17. T. Bjorninen, M. Lauri, L. Ukkonen, R. Ritala, A. Z. Elsherbeni, and L. Sydanheimo, "Wireless measurement of RFID IC impedance," IEEE Trans. Instrum. Meas., vol. 60, no. 9, pp. 3194-3206, Sep. 2011.
18. A. J. S. Boaventura and N. B. Carvalho, "Using X-parameters to model RFID energy harvesting circuits," in Proc. 5th Eur. Conf. Antennas Propag. (EUCAP), 2011, pp. 2819-2822.
19. E. Falkenstein, M. Roberg, and Z. Popović, "Low-power wireless power delivery," IEEE Trans. Microw. Theory Tech., vol. 60, no. 7, pp. 2277-2286, Jul. 2012.
20. J. Sevic, "Introduction to tuner-based measurement and characterization," Maury Microwave Corporation, Tech. Data 5C-054, 2004.
21. S. C. Cripps, RF Power Amplifiers for Wireless Communications, 2nd ed. Norwood, MA: Artech House, 2006.
22. S. A. Maas, Nonlinear Microwave and RF Circuits, 2nd ed. Norwood, MA: Artech House, 2003.
23. F. Deshours, E. Bergeault, F. Blache, J.-P. Villotte, and B. Villeforceix, "Experimental comparison of load-pull measurement systems for nonlinear power transistor characterization," IEEE Trans. Instrum. Meas., vol. 46, no. 6, pp. 1251-1255, 1997. (Pubitemid 127761962)
24. "Accuracy and verification of load pull measurements," Focus Microwaves Inc., Dollard-des-Ormeaux, QC, Canada, Appl. Note 18, 1994.
25. Agilent Nonlinear Vector Network Analyzer (NVNA) Agilent Technologies, Santa Clara,, CA, Brochure 5989-8575EN.
26. "Agilent U9391C/F comb generator, operating and service manual," Agilent Technologies, Santa Clara, CA, u9391-90001, Aug. 2009, 3rd ed.
27. L. Betts, "Application of agilents PNA-X nonlinear vector network analyzer and X-parameters in power amplifier design," Agilent Technologies, Santa Clara,, CA, White Paper 5990-7768EN, 2011.
28. Verspecht and D. E. Root, "Polyharmonic distortion modeling," IEEE Microw. Mag., vol. 7, no. 3, pp. 44-57, 2006.
29. J. Verspecht, D. Gunyan, J. Horn, J. Xu, A. Cognata, and D. E. Root, "Multi-tone, multi-port, and dynamic memory enhancements to PHD nonlinear behavioral models from large-signal measurements and simulations," in Proc. IEEE/MTT-S Int. Microw. Symp., 2007, pp. 969-972. (Pubitemid 47486157)
30. J. M. Horn, J. Verspecht, D. Gunyan, L. Betts, D. E. Root, and J. Eriksson, "X-parameter measurement and simulation of a GSM handset amplifier," in Proc. Eur. Microw. Integr. Circuit Conf. (EuMIC), 2008, pp. 135-138.
31. S. Dudkiewicz, "Vector-receiver load pull measurement Maury Microwaves Corporation, Ontario, CA, Article Reprint 5A-051, 2011.
32. J. Rahola, "Power waves and conjugate matching," IEEE Trans. Circuits Syst. II, Brief Papers, vol. 55, no. 1, pp. 92-96, 2008.
33. D. M. Pozar, Microwave Engineering, 3rd ed. New York: Wiley, 2004.
34. "Arbitrary impedance," Anritsu EMEA Ltd., Morgan Hill, CA, Appl. Note, 2002.
35. K. Kurokawa, "Power waves and the scattering matrix," IEEE Trans. Microw. Theory Tech., vol. MTT-13, no. 2, pp. 194-202, Mar. 1965.
36. R. B. Marks and D. F.Williams, "A general waveguide circuit theory," J. Res. Nat. Inst. Standards Technol., vol. 97, pp. 533-562, 1992.
37. J. Essel, D. Brenk, J. Heidrich, R. Weigel, G. Hofer, and G. Holweg, "A low-power multi-standard frontend for wireless sensor networks," in Proc. IEEE Sensors, 2010, pp. 1124-1128.
38. T. Ussmueller, D. Brenk, J. Essel, J. Heidrich, G. Fischer, and R. Weigel, "A multistandard HF/UHF-RFID-tag with integrated sensor interface and localization capability," in Proc. IEEE Int. Conf. RFID, 2012, pp. 66-73.
39. J. Essel, D. Brenk, J. Heidrich, G. Hofer, G. Holweg, and R. Weigel, "Design of a highly efficient CMOS rectifier for passive communication systems," in Proc. Asia-Pacific Microw. Conf. (APMC), 2010, pp. 896-899.