Combining Genetic Algorithms with a Meso-Scale Approach for System Identification of a Smart Polymeric Textile

Computer-Aided Civil and Infrastructure Engineering

Volumn 28, Issue 3, 2013, Pages 227-245

  Fuggini, C ^a   Chatzi, E ^b   Zangani, D ^a  

^a D APPOLONIA S P A   (Italy)

^b ETH ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

CALIBRATED MODEL; EXPERIMENTAL CAMPAIGN; FINITE ELEMENT MODELS; FULL SCALE TESTS; MASONRY STRUCTURES; MATERIAL CHARACTERIZATIONS; MESOSCALE; NOVEL MATERIALS; OPTIMIZERS; PHYSICAL MODEL; RESEARCH INFRASTRUCTURE; SEISMIC ENGINEERING; SEISMIC RESISTANCE; STRUCTURAL SYSTEM IDENTIFICATION;

DYNAMIC RESPONSE; GENETIC ALGORITHMS; INVERSE PROBLEMS; MASONRY MATERIALS; SEISMOLOGY; SOFTWARE TESTING; TEXTILES; THREE DIMENSIONAL;

POLYMERS;

DYNAMIC ANALYSIS; DYNAMIC RESPONSE; FINITE ELEMENT METHOD; GENETIC ALGORITHM; IDENTIFICATION METHOD; MASONRY; MULTISTOREY BUILDING; SEISMIC DESIGN; SEISMIC RETROFIT; STRUCTURAL ANALYSIS; STRUCTURAL RESPONSE;

EID: 84873312536     PISSN: 10939687     EISSN: 14678667     Source Type: Journal    
DOI: 10.1111/j.1467-8667.2012.00789.x     Document Type: Article

References (88)

1. Adeli, H. & Cheng, N.-T. (1993), Integrated genetic algorithm for optimization of space structures, Journal of Aerospace Engineering, ASCE, 6(4), 315-28.
2. Adeli, H. & Cheng, N.-T. (1994a), Augmented Lagrangian genetic algorithm for structural optimization, Journal of Aerospace Engineering, ASCE, 7(1), 104-18.
3. Adeli, H. & Cheng, N.-T. (1994b), Concurrent genetic algorithms for optimization of large structures, Journal of Aerospace Engineering, ASCE, 7(3), 276-96.
4. Adeli, H. & Kim, H. (2009), Wavelet-Based Vibration Control of Smart Buildings and Bridges, CRC Press, Taylor & Francis, Boca Raton, FL.
5. Adeli, H. & Jiang, X. (2006), Dynamic fuzzy wavelet neural network model for structural system identification, Journal of Structural Engineering, ASCE, 132(1), 102-11.
6. Adeli, H. & Jiang, X. (2009), Intelligent Infrastructure - Neural Networks, Wavelets, and Chaos Theory for Intelligent Transportation Systems and Smart Structures, CRC Press, Taylor & Francis, Boca Raton, FL.
7. Adeli, H. & Kumar, S. (1995), Concurrent structural optimization on a massively parallel supercomputer, Journal of Structural Engineering, ASCE, 121(11), 1588-97.
8. Adewuyi, A. P. & Wu, Z. (2011), Vibration-based damage localization in flexural structures using normalized modal macrostrain techniques from limited measurements, Computer-Aided Civil and Infrastructure Engineering, 26(3), 154-72.
9. Al-Bazi, A. & Dawood, N. (2010), Developing crew allocation system for precast industry using genetic algorithms, Computer-Aided Civil and Infrastructure Engineering, 25(8), 581-95.
10. Aldemir, U., Yanik, A. & Bakiogl, M. U. (2012), Control of structural response under earthquake excitation, Computer-Aided Civil and Infrastructure Engineering, 27(8), 620-38.
11. ANSYS general-purpose structural analysis code, Version 10, Ansys Inc., Pittsburgh, PA, 2005.
12. Ashrafi, S. & Smyth, A. W. (2008), Adaptive parametric identification scheme for a class of nondeteriorating and deteriorating nonlinear hysteretic behavior, Journal of Engineering Mechanics-ASCE, 134(6), 482-94.
13. Berto, L., Saetta, A., Scotta, R. & Vitaliani, R. (2002), An orthotropic damage model for masonry structures, International Journal for Numerical Methods in Engineering, 55, 127-57.
14. Bitaraf, M., Hurlebaus, S. & Barroso, L. R. (2012), Active and semi-active adaptive control for undamaged and damaged building structures under seismic load, Computer-Aided Civil and Infrastructure Engineering, 27(1), 48-64.
15. Bocca, M., Mahmood, A., Eriksson, L. M., Kullaa, J. & Jäntti, R. (2011), A synchronized wireless sensor network for experimental modal analysis in structural health monitoring, Computer-Aided Civil and Infrastructure Engineering, 26(7), 483-99.
16. Brignola, A., Frumento, S., Lagomarsino, S. & Podestà, S. (2008), Identification of shear parameters of masonry panels through the in-situ diagonal compression test, International Journal of Architectural Heritage, 3(1), 52-73.
17. Brincker, R., Zhang, L. & Andersen, P. (2000), Modal identification from ambient responses using frequency domain decomposition, Proceedings of the 18th SEM International Modal Analysis Conference, San Antonio.
18. Carroll, D. L. (1999), FORTRAN Genetic Algorithm (GA) Driver. Available at: http://www.cuaerospace.com/carroll/ga.html.
19. Cecchi, A., Milani, G. & Tralli, A. (2005). Validation of analytical multiparameter homogenization models for out-of-plane loaded masonry walls by means of the finite element method, Journal of Engineering Mechanics, 131(2), 185-98.
20. Chatzi, E. N., Hiriyur, B., Waisman, H. & Smyth, A. W. (2011), Experimental application and enhancement of the XFEM-GA algorithm for the detection of flaws in structures, Computers & Structures, 89(7-8), 556-70.
21. Cheng, T. M. & Yan, R. Z. (2009), Integrating messy genetic algorithms and simulation to optimize resource utilization, Computer-Aided Civil and Infrastructure Engineering, 24(6), 401-15.
22. Cho, B. H., Jo, J. S., Joo, S. J. & Kim, H. (2012), Dynamic parameter identification of secondary mass dampers based on full-scale tests, Computer-Aided Civil and Infrastructure Engineering, 27(3), 218-30.
23. CNR-DT 200/2004: Guide for the design and construction of externally bonded FRP systems for strengthening existing structures.
24. Cusson, D., Lounis, Z. & Daigle, L. (2011), Monitoring life cycle performance of aging concrete highway bridges built in corrosive environments, Computer-Aided Civil and Infrastructure Engineering, 26(7), 524-41.
25. DeWilde, W. P., Narmon, B., Sol, H. & Roovers, M. (1984), Determination of the material constants of an anisotropic lamina by free vibration analysis, Proceedings of Modal Analysis Conference, Orlando, 44-49.
26. Faella, C., Martinelli, E., Nigro, E. & Paciello, S. (2004), Tuff masonry walls strengthened with a new kind of C-FRP sheet: experimental tests and analysis. Proceedings of the 13th World Conference on Earthquake Engineering, Paper No. 923.
27. FEMA 306 (1999), Evaluation of Earthquake Damaged Concrete And Masonry Wall Buildings-Basic Procedures. Technical Report, Federal Emergency Management Agency (FEMA), FEMA 306, Prepared by Applied Technology Council.
28. Feng, Z. Q. & Katafygiotis, L. S. (2011), A method for correcting synchronization errors in wireless sensors for structural modal identification, Proceedings of the 12th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC), Hong Kong, January 26-28, 2011.
29. Figueiredo, E., Park, G., Figueiras, J., Farrar, C. & Worden, K. (2011), Influence of the section, Computer-Aided Civil and Infrastructure Engineering, 26(3), 225-38.
30. Fisco, N. R. & Adeli, H. (2011a), Smart structures: part I - active and semi-active control, Scientia Iranica-Transaction A: Civil Engineering, 18(3), 275-284 (Invited Paper).
31. Fisco, N. R. & Adeli, H. (2011b), Smart structures: part II - hybrid control systems and control strategies, Scientia Iranica-Transaction A: Civil Engineering, 18(3), 285-95 (Invited Paper).
32. Frederiksen, P. S. (1997), Experimental procedure and results for the identification of elastic constants of thick orthotropic plates, Journal of Composite Materials, 31(4), 360-82.
33. Fuggini, C., Chatzi, E., Zangani, D. & Messervey, T. B. (2011), Innovative multifunctional reinforcement technology for masonry buildings: numerical validation and damage detection investigation, Proceedings of COMPDYN 2011, Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece.
34. Gangone, M. V., Whelan, M. J. & Janoyan, K. D. (2011), Wireless monitoring of a multi-span bridge superstructure for diagnostic load testing and system identification, Computer-Aided Civil and Infrastructure Engineering, 26(7), 560-79.
35. Garshasbinia, N. & Eskandari Jam, J. (2005), Identification of mechanical properties in laminated composite plates using genetic algorithm, Iranian Polymer Journal, 14(1), 39-46.
36. Gholizadeh, S. & Salajegheh, E. (2009), Optimal design of structures subjected to time history loading by swarm intelligence and an advanced metamodel, Computer Methods in Applied Mechanics and Engineering, 198(37-40), 2936-49.
37. Goldberg, D. E. (1989), Sizing populations for serial and parallel genetic algorithms, in Proceedings of the 3rd International Conference on Genetic Algorithms, Morgan Kaufman, 70-9.
38. Hazra, B., Sadhu, A., Roffel, A. J. & Narasimhan, S. (2012), Hybrid time-frequency blind source separation - towards ambient system identification of structures, Computer-Aided Civil and Infrastructure Engineering, 27(5), 314-32.
39. Hizir, N. B., Phan, M. Q. & Raimondo B. (2012), Identification of discrete-time bilinear systems through equivalent linear models, Nonlinear Dynamics, 69(4), 2065-78.
40. Jafarkhani, R. & Masri, S. F. (2011), Finite element model updating using evolutionary strategy for damage detection, Computer-Aided Civil and Infrastructure Engineering, 26(3), 207-24.
41. James, G. H., Carne, T. G., Lauffer, J. P. & Nord, A. R. (1992). Modal testing using natural excitation, Proceedings of 10th International Modal Analysis Conference, San Diego, CA.
42. Jiang, X. & Adeli, H. (2005), Dynamic wavelet neural network for nonlinear identification of highrise buildings, Computer-Aided Civil and Infrastructure Engineering, 20(5), 316-30.
43. Jiang, X. & Adeli, H. (2007), Pseudospectra, MUSIC, and dynamic wavelet neural network for damage detection of highrise buildings, International Journal for Numerical Methods in Engineering, 71(5), 606-29.
44. Jiang, X. & Adeli, H. (2008), Neuro-genetic algorithm for nonlinear active control of highrise buildings, International Journal for Numerical Methods in Engineering, 75(7), 770-86.
45. Jiang, X., Mahadevan, S. & Adeli, H. (2007), Bayesian wavelet packet denoising for structural system identification, Structural Control and Health Monitoring, 14(2), 333-56.
46. Juang, J.-N. & Pappa, R. S. (1985), An eigensystem realization algorithm for modal parameter identification and model reduction, Journal of Guidance, Control, and Dynamics, 8(5), 620-7.
47. Kang, M. W., Schonfeld, P. & Yang, N. (2009), Prescreening and repairing in a genetic algorithm for highway alignment optimization, Computer-Aided Civil and Infrastructure Engineering, 24(2), 109-19.
48. Kang, N., Kim, H., Choi, S., Jo, S., Hwang, J. S. & Yu, E. (2012), Performance evaluation of TMD under typhoon using system identification and inverse wind load estimation, Computer-Aided Civil and Infrastructure Engineering, 27(6), 455-73.
49. Karapitta, L., Mouzakis, H. & Carydis, P. (2011), Explicit nite-element analysis for the in-plane cyclic behavior of unreinforced masonry structures, Earthquake Engineering and Structural Dynamics, 40, 175-93.
50. Kim, H. & Adeli, H. (2001), Discrete cost optimization of composite floors using a floating point genetic algorithm, Engineering Optimization, 33(4), 485-501.
51. Koumousis, C. P. & Katsaras, V. K. (2006), A saw-tooth genetic algorithm combining the effects of variable population size and reinitialization to enhance performance, IEEE Transactions on Evolutionary Computation, 10(1), 19-28.
52. Krevaikas, T. (2005), Strengthening of unreinforced masonry structures with advanced composites, Ph.D. dissertation, University of Patras, Greece.
53. Krevaikas, T. & Triantafillou, T. C. (2005a), Masonry confinement with fiber reinforced polymers, Journal of Composites for Construction 9(2), 128-35.
54. Krevaikas, T. D. & Triantafillou, T. C. (2005b), Computer aided strengthening of masonry walls using fiber reinforced polymer strips, Materials and Structures, 38, 93-8.
55. Lacy, T. E., McDowell, D. L., Willice, P. A. & Talreja, R. (1997), On representation of damage evolution in continuum damage mechanics, International Journal of Damage Mechanics, 6, 62-95.
56. Lajnef, N., Rhimi, M., Mhamdi, L., Chatti, K. & Faridazar, F. (2011), Toward a smart, long-term pavement monitoring system, Computer-Aided Civil and Infrastructure Engineering, 26(7), 513-23.
57. Lee, Y. & Wei, C. H. (2010), A computerized feature selection using genetic algorithms to forecast freeway accident duration times, Computer-Aided Civil and Infrastructure Engineering, 25(2), 132-48.
58. Lei, Y., Wu, D. T. & Lin, Y. (2012), A decentralized control algorithm for large-scale building structures, Computer-Aided Civil and Infrastructure Engineering, 27(1), 2-13.
59. Li, H., Huang, Y., Chen, W. L., Ma, M. L., Tao, D. W. & Ou, J. P. (2011), Estimation and warning of fatigue damage of FRP stay cables based on acoustic emission technique and fractal theory, Computer-Aided Civil and Infrastructure Engineering, 26(7), 500-12.
60. Li, T., Galati, N., Tumialan, J. G. & Nanni, A. (2005), Analysis of unreinforced masonry concrete walls strengthened with glass fiber-reinforced polymer bars, ACI Structural Journal, 102(4), 569-77.
61. Lourenco, P. B. (1996), Computational Strategy for Masonry Structures, Delft University Press, The Netherlands.
62. Lourens, E., Papadimitriou, C. & Gillijns, S. (2012), Joint input-response estimation for structural systems based on reduced-order models and vibration data from a limited number of sensors, Mechanical Systems and Signal Processing, 29, 310-27 (Special Issue).
63. Luciano, R. & Sacco, E. (1998a), A damage model for masonry structures, European Journal of Mechanics A-Solids, 17(2), 285-303.
64. Luciano, R. & Sacco, E. (1998b), Damage of masonry panels reinforced by FRP sheets, International Journal of Solids and Structures, 35(15), 1723-41.
65. Marano, G. C., Quaranta, G. & Monti, G. (2011), Modified genetic algorithm for the dynamic identification of structural systems using incomplete measurements, Computer-Aided Civil and Infrastructure Engineering, 26(2), 92-110.
66. Messervey, T. B., Zangani, D. & Fuggini, C. (2010), Sensor-embedded textiles for the reinforcement, dynamic characterisation, and structural health monitoring of masonry structures, Proceedings of the 5th EWSHM 2010, June 28-July 2, Sorrento, Italy, 1075-282.
67. Miller, B. L. & Goldberg, D. E. (1995), Genetic algorithms, tournament selection, and the effects of noise, Complex Systems, 9, 193-212.
68. Mitchell, M. (1998), An Introduction to Genetic Algorithms, MIT Press, Cambridge, MA.
69. Mota Soares, C. M., Moreira de Freitas, M. & Araujo, A. L. (1993), Identification of material properties of composite plate specimens, Composite Structures, 25, 277-85.
70. Nurchi, A. & Valdes, M. (2005), Strengthening of stone masonry columns by means of cement-based composite wrapping, in P. Hamelin (ed.), CCC 2005: 3rd International Conference on Composites in Construction, Lyon, France, 1189-96.
71. Osornio-Rios, R. A., Amezquita-Sanchez, J. P., Romero-Troncoso, R. J. & Garcia-Perez, A. (2012), MUSIC-neural network analysis for locating structural damage in truss-type structures by means of vibrations, Computer-Aided Civil and Infrastructure Engineering, 27(9), 687-98.
72. Papa, E. (1996), A unilateral damage model for masonry based on a homogeneisation procedure. Mechanics of Cohesive Frictional Materials, 1, 349-66.
73. Paulay, T. & Priestley, M. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, ISBN 0-471-54915.
74. POLYMAST (2011), Polyfunctional Technical Textiles for the Protection and Monitoring of Masonry Structures Against Earthquakes, Final Report, SEVENTH FRAMEWORK PROGRAMME Capacities Specific Programme Research Infrastructures, Project No.: 227887, POLYTECT project: http://www.polytect.net.
75. Puscasu, G. & Codres, B. (2011), Nonlinear system identification and control based on modular neural networks, International Journal of Neural Systems, 21(4), 319-34.
76. Raich, A. M. & Liszkai, T. R. (2012), Multi-objective optimization of sensor and excitation layouts for frequency response function-based structural damage identification, Computer-Aided Civil and Infrastructure Engineering, 27(2), 95-117.
77. Rikards, R., Chate, A., Steinchen, W., Kessler, A. & Bledzki, A. K., (1999), Method for identification of elastic properties of laminates based on experiment design, Composites Part B: Engineering, 30(3), 279-89.
78. Salonikios, T., Karakostas, C., Lekidis, V. & Anthoine, A. (2003), Comparative inelastic pushover analysis of masonry frames, Engineering Structures, 25, 1515-23, SERIES project: http://www.series.upatras.gr.
79. Schoefs, F., Yáñez-Godoy, H. & Lanata, F. (2011), Polynomial chaos representation for identification of mechanical characteristics of instrumented structures, Computer-Aided Civil and Infrastructure Engineering, 26(3), 173-89.
80. Sirca, G. F., Jr. & Adeli, H. (2012), System identification in structural engineering, Scientia Iranica-Transaction A: Civil Engineering, 19(6) (Invited Paper).
81. Sol, H. & De Wilde, W. P. (1989), Identification of elastic properties of composite materials using resonant frequencies, CAD in Composite Material Technology, Springer-Verlag, Southampton, UK, pp. 273-80.
82. Talebinejad, I., Fischer, C. & Ansari, F. (2011), Numerical evaluation of vibration based methods for damage assessment of cable stayed bridges, Computer-Aided Civil and Infrastructure Engineering, 26(3), 239-51.
83. Triantafillou, T. C. & Fardis, M. N. (1997), Strengthening of historic masonry structures with composite materials, Material Structure, 30, 486-96.
84. Waisman, H., Chatzi, E. & Smyth, A. W. (2010), Detection and quantification of flaws in structures by the extended finite element method and genetic algorithms, International Journal for Numerical Methods in Engineering, 82, 303-28.
85. Whitley, D. (1994), A genetic algorithm tutorial, Statistics and Computing, 4(1994), 6585.
86. Xia, Y., Ni, Y. Q., Zhang, P., Liao, W. Y. & Ko, J. M. (2011), Stress development of a super-tall structure during construction: numerical analysis and field monitoring verification, Computer-Aided Civil and Infrastructure Engineering, 26(7), 542-59.
87. Yan, W. J. & Ren, W. X. (2012), Operational modal parameter identification from power spectrum density transmissibility, Computer-Aided Civil and Infrastructure Engineering, 27(3), 202-17.
88. Yu, G., Tzeng, G. Y., Chaturvedi, S., Adeli, H. & Zhang, S. Q. (1995), A finite element approach to global-local modeling in composite laminate analysis, Computers and Structures, 57(6), 1035-44.