A reconfigurable communication gateway for distributed embedded control systems

IECON Proceedings (Industrial Electronics Conference)

Volumn , Issue , 2012, Pages 3720-3726

  Andren, Filip ^a   Strasser, Thomas ^a   Zoitl, Alois ^b   Hegny, Ingo ^b  

^a AIT AUSTRIAN INSTITUTE OF TECHNOLOGY   (Austria)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDING AUTOMATION; COMMUNICATION GATEWAY; COMMUNICATION PATTERN; COMMUNICATION SERVICE; DISTRIBUTED EMBEDDED CONTROL SYSTEM; ENERGY SYSTEMS; FUNCTION BLOCK; GATEWAY DEVICES; IEC 61499; INDUSTRIAL AUTOMATION; LARGE-SCALE APPLICATIONS; LIFE-TIMES; MANAGEMENT MODEL; REFERENCE MODELS; SERVICE INTERFACES;

COMMUNICATION; CONTROL SYSTEMS; FLEXIBLE STRUCTURES; INTELLIGENT BUILDINGS; RECONFIGURABLE HARDWARE; STANDARDS;

INDUSTRIAL ELECTRONICS;

EID: 84872902043     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IECON.2012.6389299     Document Type: Conference Paper

References (31)

1. L. Guohuan, Z. Hao, and Z. Wei, "Research on designing method of CAN bus and Modbus protocol conversion interface," in BioMedical Information Engineering, 2009. FBIE 2009. International Conference on Future, Dec. 2009, pp. 180-182.
2. IEC 61499: Function blocks, Part 1-4, International Electrotechnical Commission Std. IEC 61 499, 2005. [Online]. Available: www.iec.ch
3. IEC 61131: Programmable controllers, Part 3: Programming languages, International Electrotechnical Commission Std. IEC 61 131, 2003. [Online]. Available: www.iec.ch
4. R. W. Lewis, Modeling control systems using IEC 61499. IEE Publishing, 2001, no. ISBN: 0 85296 796 9.
5. J. H. Christensen. (Access Date: May 2012) HOLOBLOC.com - Function Block-Based, Holonic Systems Technology. [Online]. Available: www.holobloc.com
6. IEC 61131: Programmable controllers, Part 5: Communications, International Electrotechnical Commission Std. IEC 61 131, 2000. [Online]. Available: www.iec.ch
7. OPC VA Information Model for IEC 61131-3, PLCopen & OPC Foundation Std. 1.00, 2010. [Online]. Available: www.plcopen.org
8. F. Andren and T. Strasser, "Distributed open source control with Industrial Ethernet I/O devices;" in Emerging Technologies Factory Automation (ETFA), 2011 IEEE 16th Conference on, Sept. 2011.
9. W. Leonhardsberger and A. Zoitl, "Using EtherNet/IP with IEC 61499 Communication Function Blocks," in HoloMAS, ser. Lecture Notes in Computer Science, V. Marik, P. V rba, and P. Leitao, Eds., vol. 6867. Springer, 2011, pp. 39-49.
10. J. J. Scarlett and R. W. Brennan, "Evaluating a new communication protocol for real-time distributed control," Robotics and Computer Integrated Manufacturing, vol. 27, no. 3, pp. 627-635, 2011.
11. C. Schwab, M. Tangermann, A. Luder, A. Kalogeras, and L. Ferrarini, "Mapping of IEC 61499 function blocks to automation protocols within the TORERO approach," in Industrial Informatics, 2004. INDIN '04. 2004 2nd IEEE International Conference on, June 2004, pp. 149-154.
12. J. Kramer and J. Magee, "Dynamic Configuration for Distributed Systems," Software Engineering, IEEE Transactions on, vol. SE-11, no. 4, pp. 424-436, Apr. 1985.
13. R. Brennan, M. Fletcher, and D. Norrie, "An agent-based approach to reconfiguration of real-time distributed control systems," Robotics and Automation, IEEE Transactions on, vol. 18, no. 4, pp. 444-451, Aug. 2002.
14. M. Khalgui, O. Mosbahi, Z. Li, and H.-M. Hanisch, "Reconfiguration of Distributed Embedded-Control Systems," Mechatronics, IEEEIASME Transactions on, vol. 16, no. 4, pp. 684-694, Aug. 2011.
15. M. Vallee, M. Merdan, W. Lepuschitz, and G. Koppensteiner, "Decentralized Reconfiguration of a Flexible Transportation System," Industrial Informatics, IEEE Transactions on, vol. 7, no. 3, Aug. 2011.
16. M. Fletcher and D. Norrie, "Realtime reconfiguration using an IEC 61499 operating system," in Parallel and Distributed Processing Symposium., Proceedings 15th International, Apr. 2001, pp. 985-991.
17. A. Schimmel and A. Zoitl, "Distributed online change for IEC 61499," in Emerging Technologies Factory Automation (ETFA), 2011 IEEE 16th Conference on, Sept. 2011.
18. G. Stambolov and I. Batchkova, "Reconfiguration processes in manufacturing systems on the base of IEC 61499 standard," in Intelligent Data Acquisition and Advanced Computing Systems (IDA ACS), 2011 IEEE 6th International Conference on, vol. 1, Sept. 2011, pp. 161-166.
19. A. Zoitl, C. Sunder, and I. Terzic, "Dynamic Reconfiguration of Distributed Control Applications with Reconfiguration Services based on IEC 61499," in Distributed Intelligent Systems: Collective Intelligence and Its Applications, 2006. DIS 2006. IEEE Workshop on, June 2006, pp. 109-114.
20. T. Strasser, C. Sunder, A. Zoitl, M. Rooker, and J. Brunnenkreef, "Enhanced IEC 61499 Device Management Execution and Usage for Downtimeless Reconfiguration," in Industrial Informatics, 2007 5th IEEE International Conference on, vol. 2, June 2007, pp. 1163-1168.
21. S. J. Mellor, S. Kendall, A. Uhl, and D. Weise, MDA Distilled. Redwood City, CA, USA: Addison Wesley Longman Publishing Co., Inc., 2004.
22. M. Wenger, M. Melik-Merkumians, I. Hegny, R. Hametner, and A. Zoitl, "Utilizing IEC 61499 in an MDA control application development approach," in Automation Science and Engineering (CASE), 2011 IEEE Conference on, Aug. 2011, pp. 495-500.
23. K. Thramboulidis, "Model-integrated mechatronics - toward a new paradigm in the development of manufacturing systems," Industrial Informatics, IEEE Transactions on, vol. 1, no. 1, pp. 54-61, Feb. 2005.
24. T. Strasser, C. SUnder, and A. Valentini, "Model-driven embedded systems design environment for the industrial automation sector," in Industrial Informatics, 2008. INDIN 2008. 6th IEEE International Conference on, July 2008, pp. 1120-1125.
25. D. Hastbacka, T. Vepsiilainen, and S. Kuikka, "Model-driven development of industrial process control applications," Journal of Systems and Software, vol. 84, no. 7, pp. 1100-1113, 2011.
26. M. Wenger, A. Zoitl, R. Froschauer, M. Rooker, G. Ebenhofer, and T. Strasser, "Model-driven engineering of networked industrial automation systems," in Industrial Informatics (INDIN), 2010 8th IEEE International Conference on, July 2010, pp. 902-907.
27. A. Zoitl and V. V yatkin, "IEC 61499 Architecture for Distributed Automation: the "Glass Half Full" View," IEEE Industrial Electronics Magazine, vol. 3, no. 4, pp. 7-23, 2009.
28. 4DIAC Consortium, "Framework for Distributed Industrial Automation and Control (4DIAC)," PROFACTOR Research, Tech. Rep., Access Date: May 2012. [Online]. Available: http://www.fordiac.org
29. F. Weehuizen and A. Zoitl, "Using the CIP Protocol with IEC 61499 Communication Function Blocks," in Industrial Informatics, 2007 5th IEEE International Conference on, vol. 1, June 2007, pp. 261-265.
30. M. Hofmann, M. Rooker, and A. Zoitl, "Improved communication model for an iec 61499 runtime environment," in Emerging Technologies Factory Automation (ETFA), 2011 IEEE 16th Conference on, sept. 2011, pp. 1-7.
31. W. Harrison, D. Tilbury, and C. Yuan, "From Hardware-in-the-Loop to Hybrid Process Simulation: An Ontology for the Implementation Phase of a Manufacturing System," Automation Science and Engineering, IEEE Transactions on, vol. 9, no. 1, pp. 96-109, Jan. 2012.