Compressive deformation behavior of an indirect-extruded Mg-8Sn-1Al-1Zn alloy

International Journal of Minerals, Metallurgy and Materials

Volumn 20, Issue 1, 2013, Pages 49-56

  Cheng, Wei Li ^a,b   Que, Zhong Ping ^a   Zhang, Jin Shan ^a   Xu, Chun Xiang ^a   Liang, Wei ^a   You, Bong Sun ^b   Park, Sung Soo ^c  

^a TAIYUAN UNIVERSITY OF TECHNOLOGY   (China)

^b Korea Institute of Material Science   (South Korea)

^c Ulsan National Institute of Science and Technology   (South Korea)

Author keywords

compression testing; dynamic recrystallization; magnesium alloys; microstructure

Indexed keywords

COMPRESSION TESTS; COMPRESSIVE DEFORMATION BEHAVIOR; DEFORMATION CONDITIONS; HIGH STRAIN RATES; LOW STRAIN RATES; LOW TEMPERATURES; MICROSTRUCTURAL INVESTIGATION; ORIENTED NUCLEATION; RECRYSTALLIZED GRAINS; SELECTIVE GROWTH; STRAIN-RATE-DEPENDENT; TRUE STRESS TRUE STRAIN CURVE; WARM DEFORMATION;

COMPRESSION TESTING; DEFORMATION; DYNAMIC RECRYSTALLIZATION; GRAIN BOUNDARIES; MAGNESIUM ALLOYS; MICROSTRUCTURE; STRAIN RATE; TIN; TIN ALLOYS; ZINC; ZINC ALLOYS;

ALUMINUM;

EID: 84872484405     PISSN: 16744799     EISSN: 1869103X     Source Type: Journal    
DOI: 10.1007/s12613-013-0692-9     Document Type: Article

References (24)

1. D.H. Kang, S.S. Park, and N.J Kim, Development of creep resistant die cast Mg-Sn-Al-Si alloy, Mater. Sci. Eng. A, 413-414(2005), No. 1, p. 555.
2. C.L. Mendis, C.J. Bettles, M.A. Gibson, and C.R. Hutchinson, An enhanced age hardening response in Mg-Sn based alloys containing Zn, Mater. Sci. Eng. A, 435-436(2006), No. 1-2, p. 163.
3. H.M. Liu, Y.G. Chen, Y.B. Tang, S.H. Wei, and G. Niu, The microstructure, tensile properties, and creep behavior of as-cast Mg-(1-10)%Sn alloys, J. Alloys Compd., 440(2007), No. 1-2, p. 122.
4. S.H. Wei, Y.G. Chen, Y.B. Tang, H.M. Liu, S.F. Xiao, G. Niu, X.P. Zhang, and Y.H. Zhao, Compressive creep behavior of as-cast and aging-treated Mg-5wt% Sn alloys, Mater. Sci. Eng. A, 492(2008), No. 1-2, p. 20.
5. M.A. Gibson, X. Fang, C.J. Bettles, and C.R. Hutchinson, The effect of precipitate state on the creep resistance of Mg-Sn alloys, Scripta Mater., 63(2010), No. 8, p. 899.
6. S.S. Park, W.N. Tang, and B.S. You, Microstructure and mechanical properties of an indirect-extruded Mg-8Sn-1Al-1Zn alloy, Mater. Lett., 64(2010), No. 1, p. 31.
7. T.T. Sasaki, K. Yamamoto, T. Honma, S. Kamado, and K. Hono, A high-strength Mg-Sn-Zn-Al alloy extruded at low temperature, Scripta Mater., 59(2008), No. 10, p. 1111.
8. W.L. Cheng, S.S. Park, B.S. You, and B.H. Koo, Microstructure and mechanical properties of binary Mg-Sn alloys subjected to indirect extrusion, Mater. Sci. Eng. A, 527(2010), No. 18-19, p. 4650.
9. K. Yu, W.X. Li, J. Zhao, Z.Q. Ma, and R. Wang, Plastic deformation behaviors of a Mg-Ce-Zn-Zr alloy, Scripta Mater., 48(2003), No. 9, p. 1319.
10. S.R. Wang, M. Wang, R. Ma, Y. Wang, and Y.J. Wang, Microstructure and hot compression behavior of twin-roll-casting magnesium alloy AZ41M, Rare Met., 29(2010), No. 4, p. 396.
11. Y. Zhang, X.Q. Zeng, C. Lu, and W.J. Ding, Deformation behavior and dynamic recrystallization of a Mg-Zn-Y-Zr alloy, Mater. Sci. Eng. A, 428(2006), No. 1-2, p. 91.
12. D.J. Li, Q.D. Wang, J.J. Blandin, M. Suery, J. Dong, and X.Q. Zeng, High temperature compressive deformation behavior of an extruded Mg-8Gd-3Y-0.5Zr (wt%) alloy, Mater. Sci. Eng. A, 526(2009), No. 1-2, p. 150.
13. K.P. Rao, Y.V.R.K. Prasad, N. Hort, and K.U. Kainer, Hot workability characteristics of cast and homogenized Mg-3Sn-1Ca alloy, J. Mater. Process. Technol., 201(2008), No. 1-3, p. 359.
14. Y.V.R.K. Prasad, K.P. Rao, N. Hort, and K.U. Kainer, Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg-3Sn-1Ca alloy, Mater. Sci. Eng. A, 502(2009), No. 1-2, p. 25.
15. S.S. Park, Y.J. Kim, W.L. Cheng, Y.M. Kim, and B.S. You, Tensile properties of extruded Mg-8Sn-1Zn alloys subjected to different heat treatments, Philos. Mag. Lett., 91(2011), No. 1, p. 35.
16. H. Beladi and M.R. Barnett, Influence of aging pre-treatment on the compressive deformation of WE54 alloy, Mater. Sci. Eng. A, 452-453(2007), No. 1-2, p. 306.
17. C.M. Liu, Z.J. Liu, X.R. Zhu, and H.T. Zhou, Research and development of dynamic recrystallization in pure magnesium and its alloys, Chin. J. Nonferrous Met., 16(2006), No. 1, p. 1.
18. Y. Lou, L.X. Li, J. Zhou, and L. Na, Deformation behavior of Mg-8Al magnesium alloy compressed at medium and high temperatures, Mater. Charact., 62(2011), No. 3, p. 346.
19. S.E. Ion, F.J. Humphreys, and S.H. White, Dynamic recrystallisation and the development of microstructure during the high temperature deformation of magnesium, Acta Metall., 30(1982), No. 10, p. 1909.
20. H.J. McQueen and N.D. Ryan, Constitutive analysis in hot working, Mater. Sci. Eng. A, 322(2002), No. 1-2, p. 43.
21. A. Mwembela, E.B. Konopleva, and H.J. Mcqueen, Microstructural development in Mg alloy AZ31 during hot working, Scripta Mater., 37(1997), No. 11, p. 1789.
22. H. Zhang, L.X. Li, D. Yuan, and D.S. Peng, Hot deformation behavior of the new Al-Mg-Si-Cu aluminum alloy during compression at elevated temperatures, Mater. Charact., 58(2007), No. 2, p. 168.
23. S. Spigarelli, M. El. Mehtedi, M. Cabibbo, E. Evangelista, J. Kaneko, A. Jäger, and V. Gartnerova, Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy, Mater. Sci. Eng. A, 462(2007), No. 1-2, p. 197.
24. J.D. Robson, D.T. Henry, and B. Davis, Particle effects on recrystallization in magnesium-manganese alloys: Particle-stimulated nucleation, Acta Mater., 57(2009), No. 9, p. 2739.