General report concerning some 20th century lessons and 21st century challenges in applied rock mechanics, safety and control of the environment

9th ISRM Congress

Volumn , Issue , 1999, Pages 1659-1679

  Barton, Nick ^a,b  

^a Nick Barton and Associates   (Norway)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; CONSTRUCTION INDUSTRY; CONTINUUM MECHANICS; DATA MINING; MINING ENGINEERING; ROCK MECHANICS;

20TH CENTURY; ANISOTROPIC PROPERTY; BASIC CONCEPTS; CONSTRUCTION ACTIVITIES; CONTINUUM MODEL; EMPIRICAL DESIGN; ROCK MASS CLASSIFICATION; STRESS TRANSFORMATION;

ROCKS;

EID: 84872413305     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (66)

1. Amontons, O. 1699. De la résistance causée dans les machines, tant par les frottements des parties qui les composent que par la raideur des cordes qu'on y employe, et la manière de calculer l'un et l'autre, Mém. Math. Phys. Hist. Acad. Roy. Sei., 206-227.
2. Bandis, S.C. 1980. Experimental studies of scale effects on shear strength, and deformation of rock joints. Ph.D. Theses, University of Leeds, England.
3. Bakhtar, K.& Barton, N. 1984. Large scale static and dynamic friction experiments. Proc. 25"1 US Rock Mechanics Symp. Northwestern Univ., Illinois
4. Barton, N., Lien, R. & Lunde, J. 1974. Engineering classification of rock masses for the design of tunnel support. Rock Mechanics, 6 (4): 189-236.
5. Barton, N. 1976. The shear strength of rock and rack joints. Int. Jour. Rock Mech. Min. Sei. And Geomech. Abstr., 13 (9): 255-279. Also NGI-Publ. 119,1978.
6. Barton, N. & Choubey, V. 1977. The shear strength of rock joints in theory and practice. Rock Mechanics, Springer, Vienna, No. 1/2: 1-54. Also NGI-Publ. 119,1978.
7. Barton, N. & Kjxmsli, B. 1981. Shear strength of rockfill. J. Of the Geotech. Eng. Div., Proc. Of ASCE, 107 (GT7) Proc. Paper 16374, July: 873-891.
8. Barton, N. 1982. Modelling rock joint behaviour from in situ block tests: implications for nuclear waste repository design. Office of Nuclear Waste Isolation, Columbus, OH, 96 p., ONWI-308, Sept. 1982.
9. Barton, N., Bandis, S. & Bakhtar, K. 1985. Strength, deformation and conductivity coupling of rock joints. Int. J. Rock Mech. & Min. Sei. & Geomech. Abstr. 22 (3): 121-140.
10. Barton, N. 1986. Deformation phenomena in jointed rock. 8 Laurits B jenu m Memorial Lecture, Oslo. Geotechnique, 36 (2): 147-167.
11. Barton, N. & Grimstad, E. 1994. The Q-System following twenty years of application in NMT support selection. 43rd Geomechanic Colloquy, Salzburg. Felsbau, 6/94: 428-436.
12. Barton, N., By, T.L., Chryssanthakis, P., Tunbridge, L., Kristiansen, J., L0set, F, Bhasin, R.K., Westerdahl, H. & Vik, G. 1994. Predicted and measured performance of the 62m span Norwegian Olympic Ice Hockey Cavern at GjDvik. Int. J. Rock Mech. Min. Sei. & Geomech. Abstr., 31 (6): 617-641. Pergamon.
13. Barton, N. 1995. The influence of joint properties in modelling jointed rock masses. Keynote Lecture, 8 ISRM Congress, Tokyo, Vol. 3
14. Barton, N. & Quadros, E.F. 1997. Joint aperture and roughness in the prediction of flow and groutability of rock masses. Proc. Of NY Rocks '97. Linking Science to Rock Engineering, Ed. K. Kim, Int. J. Rock Mech. And Min. Sei. Vol. 34: No. 3-4: 907-916.
15. Barton, N.I999a.Rockmass characterization from seismic measurements. Keynote lecture, Proc. SAROCKS '98, 2nd Brazilian Symp. 5 South American Rock Mech. Cong., Santos, Brazil. Eds. L. Da Silva et al. Vol. 2.
16. Barton, N. 1999b. TBM performance estimation in rock using Qtbm-Tunnels and Tunnelling International, London, Sept. 1999.
17. Barton, N. 2000a. Rock quality and seismic velocity. In Press.
18. Barton, N. 2000b. TBM tunnelling in jointed and faulted rock. In Press.
19. Bhasin, R., Barton, N., Grimstad, E., Chryssanthakis, P. & Shende, F.P. 19%. Comparison of predicted and measured performance of a large cavern in the Himalayas. Int. J. Rock Mech. Min. Sei. & Geomech. Abstr., 6: 607-626.
20. Bieniawski, Z. T. 1989. Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil and petroleum engineering. J. Wiley.
21. Chen, C. N. & Guo, G. C. 1997. Rock mass classification and guideline for tunnel convegence. Jour, of Chinese Institute of Civil and Hydraulic Engineering, 9 (3): 359-367.
22. Chryssanthakis, P., Bhasin, R.K.& Barton, N. 1996. Using NMT principles in predicting performance of a powerhouse in the Himalayas, India. Conf. On Recent Advances in Tunnelling Technology, New Dehli 1996, pp. 143-155.
23. Coulomb, C. A. 1773. Essai sur une application des règles de maximis et minimis à quelques problèmes de statique relatifs à l'architecture. Mém. Math. Phys. Acad. Roy. Sei., Paris, 5 (7): 343-382 (publ. In 1776)
24. Cundall, P. A. Voegele, M. & Fairhurst, C. 1977. Computerized design of rock slopes using interactive graphies for the input and output of geometrical data. Proc. Of 16 US Rock Mech. Symp., Univ. Of Minnesota, ASCE, New York: 5-14.
25. Esaki, T. Dcusada, K. & Aikawa, A. 1995. Surface roughness and hydraulic properties of sheared rock. Proc. Of Conf. On Fractured and Jointed Rock Masses Eds. Myer, Cook, Goodman & Tsang, Balkema, Rotterdam: 393-398.
26. Gale, J. E., Macleod, R., Gutierrez, M. & Makurat A. 1993. Integration and analyses of coupled stress-flow laboratory test data on natural fractures-MUN and NGI tests. Report to AECL, Monitoba, Canada.
27. Grimstad, E. & Barton, N. 1993. Updating of the Q-System for NMT. Proc. Of Int. Symp. On Sprayed Concrete-Modern Use of Wet Mix Sprayed Concrete for Underground Support, Fagemes, 1993, Eds Kompen, Opsahl and Berg. Norwegian Concrete Association, Oslo.
28. Gutierrez, M. & Ishihara, K. 1999. Non-coaxiality and energy dissipation in granular materials. Soils and Foundations, Japan (in press
29. Gutierrez, M. & Makurat, A. 1997. Coupled HTM modelling of cold water injection in fractured hydrocarbon reservoirs Int. J. Rock Mech. & Min. Sei. 34:3-4, Paper No. 00113.
30. Hoek, E. & Brown, E.T. 1997. Practical estimates of rock mass strength. Int. J. Rock Mech. & Min. Sei. 34(8): 1165-1186.
31. Hoek, E., Kaiser, P. K. & Bawden, W. F. 1995. Support of underground excavations in Hard Rock. Balkema, Rotterdam.
32. Loetscher, T. 1999. Appropriate sanitation in developing countries: the development of a computerized decision aid. Ph. D. Thesis, Univ. Of Queensland, Brisbane, Australia.
33. Möhr, O. 1882. Über die darstellung des spannungszustandes und des deformationszustandes eines körper-elements. Zivil Ingenieur, 113.
34. Nelson, P. 1996. Rock engineering for underground civil construction. Rock Mechanics, Eds. Aubertin, Hassani & Mitri, Balkema, Rotterdam.
35. Nunn, K. R., Barker, R. D. & Bamford, D. 1983. In situ seismic and electrical measurments of fracture anisotropy in the Uncolnshire Chalk. Q. Jl. Engng. Geol. 16: 187-195. Northern Ireland: The Geological Society.
36. NTH, 1994. Hard rock tunnel boring. Project Report 1-94, NTH/NTNU, Trondheim, Norway.
37. NGI, 1992. PROFHET-Propagation of Fluids and Heat. NGI internal
38. Oda, M.! Yamabe, T. & Kamemura, K. 1986. A crack tensor and its relation to wave velocity anisotropy in jointed rock masses. Int. J. Rock Mech. & Min. Sei., 23 (6): 387-397.
39. Olsson, R. 1998. Mechanical and hydro mechanical behaviour of hard rock joints-a laboratory study. Ph. D. Thesis, Chalmers Univ. Of Tech., Göteborg, Sweden.
40. Olsson, R & Barton, N. 1999. A improved model for hydromechanical coupling during shearing of rock joints. (Submitted for publ.
41. Potvin, Y., Hudyma, M. R. & Miller, H. D. S. 1989. Design guidelines for open stope support. Bull. Can. Min. Metall. 82 (926): 53-62.
42. Quadros, E. F. & Rlho, D. C. 1995. Grouting efficiency using directional (3-D) hydraulic tests in Pirapora Dam, Brazil. Proc. 8 Congress of ISRM, Tokyo, Ed. Fujii, Balkema, Rotterdam, 2: 823-826.
43. Robbins, R.J. 1982. The application of tunnel boring machines to bad rock conditions. Proc. ISRM Symp. Aachen, 2: 827-836, Ed.
44. Wittke, Balkema, Rotterdam Shen, B. & Barton, N. 1997. The disturbed zone around tunnels in jointed rock masses. Technical Note, Int J. Rock Mech & Min Sei. 34(1): 117-125.
45. Wickham, G. E. & Tiedemann, H. R. 1974. Ground support prediction model (R.S.R. Concept). Jacob Assoc. TR125, Jan. 74 Papers referencedfrom Session I, 9 ISRM Congress, Paris 1999.
46. Alfonsi, P., Durville, J.-L. & Rachez, X. 1999. Numerical modelling of a foundation on rock slope using the distinct element method: comparison 2D/3D (In French
47. Andersson, H. 1999. Chemical rock grouting-an experimental study on Polyurethane foams.
48. Astolfi, G., Sapigni, M., Baria, G. & lnnaurato, N. 1999. Inclines: some rock mechanics and excavation problems in two Italian cases.
49. Baria, G., Baria, M. & Repetto, L. 1999. Continuum and discontinuum modelling for design analysis of tunnels.
50. Chikahisa, H., Kobayashi, K., Nakahara, H., Matsumoto, K., Tsutsui, M. & Sakurai, S. 1999. Estimation of measurement results concerning deformation behaviour of large-scale rock cavern used as underground museum in excavation.
51. Damjanac, B., Fairhurst C. & Brandshaug, T. 1999. Numerical simulation of the effects of heating on the permeability of a jointed rock mass.
52. Dasgupta, B., Sharma, M.K.V., Verman, M. & Sharma, V.M. 1999. Design of underground caverns for Tehri hydropower project, India by numerical modelling.
53. Dershowitz, W., Lee, G., Eiben, T. & Wadleigh, E. 1999. Discrete fracture. Network. Approach. For thermally. Assisted gravity segregation enhanced oil recovery.
54. Escoffier, S., Catel, P. & Giafferi, J.L. 1999. Experience return on the empirical methods of support requirement evaluation during underground excavation projects (In French
55. Eriksson, M., Janson, T. & Stille, H. 1999. Validation of grout take models with laboratory experiments and numerical calculations.
56. Glastonbury, J., Mostyn, G. & Fell, R. 1999. Analysis and prediction of the pre-collapse deformation of cut rock slopes.
57. Goel, SC. & Wezenberg, U. 1999. Stability of open stopes at Ashanti Goldfields-Obuasi operations.
58. Hakala, M., Syrjänen, P., Roinisto, J., Salmelainen, J. & Aartolahti, J.-V. 1999. Rock mechanical design of the Kluuvi underground car park/civil defense shelter.
59. Hibino, S. & Motojima, M. 1999. Anisotropic behaviour of jointed rock mass around large-scale caverns.
60. Jang, M., Yang, H.-S. & Chung, S.-K. 1999. Stability analysis of high speed railway tunnel passing through the abandoned mine area.
61. Ii, X., Cui, L & Roegiers, J.-C. 1999. Temperature induced pore pressure and stresses and their potential impacts on wellbore stability.
62. Savich, A.I., Bronshtein, V.l., Rechitski, V.l. & Ilyin, MM. 1999. Problems of geodynamic safety of rock foundation and host rock mass of major power projects of Russia.
63. Schubert, W., Moritz, B. & Sellner, P. 1999. Tunnelling methods for squeezing ground
64. Sjöberg, J. 1999. Analysis of failure mechanisms in high rock slopes.
65. Syrjänen, P. & Lovén, P. 1999. Geostatistics and block modelling in rock mechanics.
66. Zettler, A.H., Poisel, R., Preh, A. & Roth, W.1999. Stability analysis using finite difference method.