Distillation-Adsorption Hybrid Processes to Separate Binary Liquid Mixtures with Homogeneous Azeotrope

Separation Science and Technology (Philadelphia)

Volumn 48, Issue 1, 2013, Pages 1-14

  Sharma, Pradeep K ^a   Wankat, Phillip C ^b  

^a 28100 Bonita Grande Drive   (United States)

^b Purdue University   (United States)

Author keywords

adsorption; azeotrope; distillation; isopropanol; zeolite

Indexed keywords

AQUEOUS MIXTURES; AZEOTROPIC DISTILLATION; BINARY-LIQUID MIXTURES; HIGH ENERGY REQUIREMENTS; HYBRID PROCESS; HYBRID SCHEME; ISO-PROPANOLS; PRESSURE VACUUM SWING ADSORPTIONS; SEMICONDUCTOR INDUSTRY; TEMPERATURE SWING ADSORPTION;

ACTIVATED CARBON; ADSORPTION; AZEOTROPES; OPTIMIZATION; SEMICONDUCTOR DEVICE MANUFACTURE; ZEOLITES;

DISTILLATION;

EID: 84871881644     PISSN: 01496395     EISSN: 15205754     Source Type: Journal    
DOI: 10.1080/01496395.2012.723101     Document Type: Article

References (35)

1. Doherty, M.F.; Malone, M.F. (2001) Conceptual Design of Distillation Systems; McGraw-Hill: New York, NY.
2. Wankat, P.C. (2007) Separation Process Engineering, 2nd ed.; Prentice Hall: Upper Saddle River, NJ.
3. Arifin, S.; Chien, I.L. (2007) Combined preconcentrator/recovery column design for isopropyl alcohol dehydration process. Ind. Eng. Chem. Res., 46 (8): 2535.
4. Wu, Y.-C.; Chien, I.L. (2009) Design and control of heterogeneous azeotropic column system for the separation of pyridine and water. Ind. Eng. Chem. Res., 48 (23): 10564.
5. Arifin, S. (2007) Design and control of Isopropyl Alcohol Dehydration Process. M.S. thesis, National Taiwan University of Science and Technology, Taipei.
6. Lipnizki, F.; Field, R.W.; Ten, P.-K. (1999) Pervaporation-based hybrid process: a review of process design, applications and economics. J. Memb. Sci., 153 (2): 183.
7. Hoof, V.V.; Abeele, L.V.; Buekenhoudt, A.; Dotremont, C.; Leysen, R. (2004) Economic comparison between azeotropic distillation and different hybrid systems combining distillation with pervaporation for the dehydration of isopropanol. Separation and Purification Technology, 37 (1): 33.
8. Kupiec, K., Rakoczy, J., Zelinski, L., Georgiou, A. (2008) Adsorption-desorption cycles for the separation of vapour-phase ethanol/water mixtures. Adsorption Science & Technology, 26 (3): 209.
9. Carmo, M.J.; Gubulin, J.C. (2002) Ethanol-water separation in the PSA process. Adsorption, 8 (3): 235.
10. Jeong, J.-S.; Jang, B.-U.; Kim, Y.-R.; Chung, B.-W.; Choi, G.-W. (2009) Production of dehydrated fuel ethanol by pressure swing adsorption process in the pilot plant. Korean J. Chem. Engr., 26 (5): 1308.
11. Pruksathorn, P.; Vitidsant, T. (2009) Production of pure ethanol from azeotropic solution by pressure swing adsorption. Korean J. Chem. Engr., 26 (4): 1106.
12. Guan, J.; Hu, X. (2003) Simulation and analysis of pressure swing adsorption: ethanol drying process by the electrical analogue. Separation and Purification Technology, 31 (1): 31.
13. Kupiec, K.; Rakoczy, J.; Lalik, E. (2009) Modeling of PSA separation process including friction pressure drop in adsorbent bed. Chemical Engineering and Processing: Process Intensification, 48 (7): 1199.
14. Ruthven, D.M., Farooq, S., Knaebel, K. (1994) Pressure Swing Adsorption; Wiley: New York.
15. Simo, M.; Sivashanmugam, S.; Brown, C.J.; Hlavacek, V. (2009) Adsorption/desorption of water and ethanol on 3A zeolite in near-adiabatic Fixed Bed. Ind. Eng. Chem. Res., 48 (20): 9247.
16. Carmo, M.J.; Gubulin, J.C. (1997) Ethanol-water adsorption on commercial zeolites: Kinetic and thermodynamic data. Braz. J. Chem. Eng., 14 (3).
17. Sharma, P.K.; Wankat, P.C. (2010) Solvent recovery by steamless temperature swing carbon adsorption processes. Ind. Eng. Chem. Res., 49 (22): 11602.
18. Zhang, J.; Webley, P.A.; Xiao, P. (2008) Effect of process parameters on power requirements of vacuum swing adsorption technology for CO2 capture from flue gas. Energy Conversion and Management, 49 (2): 346.
19. Sharma, P.K. (2010) Adsorption Based Novel Purification Processes. Ph.D.Dissertation, Purdue University, West Lafayette, Indiana.
20. Banat, F.; Al-Asheh, S.; Al-Lagtah, N. (2003) Adsorptive distillation adsorbents for the break-up of the isopropanol-water azeotrope using molecular sieves and low-cost biobased. Adsorption Science & Technology, 21 (9): 821.
21. Westgate, P.J.; Ladisch, M.R. (1993) Sorption of organics and water on starch. Ind. Eng. Chem. Res., 32 (8): 1676.
22. Ruthven, D.M. (1984) Principles of Adsorption and Adsorption Processes; Wiley-Interscience: New York, NY.
23. Wakao, N., Funazkri, T. (1978) Effect of fluid dispersion coefficients on particle-to-fluid mass transfer coefficients in packed beds. Chem. Engr. Sci., 33 (10): 1375.
24. Bird, R.B.; Stewart, W.E.; Lightfoot, E.N. (1960) Transport Phenomena; Wiley: New York, NY.
25. Gorbach, A.; Stegmaier, M.; Eigenberger, G. (2004) Measurement and modeling of water vapor adsorption on zeolite 4A-Equilibria and kinetics. Adsorption, 10 (1): 29.
26. Perry, R. H.; Green, D. W.; Maloney, J. O. (Eds.) (1984) Perry's Chemical Engineers' Handbook, 6th Ed.; McGraw-Hill: New York, NY.
27. Lemmon, E.W.; Jacobsen, R.T. (2004) Viscosity and thermal conductivity equations for nitrogen, oxygen, argon, and air. Int. J. Thermophys., 25 (1): 21.
28. Keller, G.E. II. (1987) New direction for an old field. AICHE Monograph Series, 83 (17).
29. White, D.H.; Barkley, P.G. (1989) The design of pressure swing adsorption systems. Chem. Eng. Progr., 85 (1): 25.
30. Lukchis, G.M. (1973) Adsorption systems. Part I: Design by mass transfer-zone concept. Chem. Eng., 80 (13): 111.
31. Douglas, J.M. (1988) Conceptual Design of Chemical Process; McGraw-Hill: New York, NY.
32. Yang, R.T. (1987) Gas Separation by Adsorption Processes; Butterworth: Boston.
33. Huggahalli, M.; Fair, J.R. (1996) Prediction of equilibrium adsorption of water onto activated carbon. Ind. Eng. Chem. Res., 35 (6): 2071.
34. Sander, R. (1999) Compilation of Henry's Law Constants for Inorganic and Organic Species of Potential Importance in Environmental Chemistry (Version 3).http://www.henrys-law.org
35. Lieberman, N.P.; Lieberman, E.T. (2008) A Working Guide to Process Equipment. 3rd ed.; McGraw Hill: New York.