Expanded microchannel heat exchanger: Design, fabrication, and preliminary experimental test

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy

Volumn 226, Issue 4, 2012, Pages 532-544

  Denkenberger, D C ^a   Brandemuehl, M J ^b   Pearce, J M ^c   Zhai, J ^b  

^a Denkenberger Inventing and Consulting   (United States)

^b University of Colorado at Boulder   (United States)

^c Michigan Technological University   (United States)

Author keywords

expanded; experimental; heat exchanger; high effectiveness; laser welding; low cost; mass production; microchannel

Indexed keywords

EXPANDED; EXPERIMENTAL; HIGH EFFECTIVENESS; LOW COSTS; MASS PRODUCTION;

COSTS; LASER BEAM WELDING; LASERS; MICROCHANNELS; PARALLEL FLOW; POLYMERS;

HEAT EXCHANGERS;

EID: 84871797504     PISSN: 09576509     EISSN: 20412967     Source Type: Journal    
DOI: 10.1177/0957650912442781     Document Type: Article

References (37)

1. Zaheed L., Jachuck R. J. J.. Review of polymer compact heat exchangers, with special emphasis on a polymer film unit. Appl. Therm. Eng.. 2004 ; 24 (16). 2323-2358
2. Greenblatt J. B., Succar S., Denkenberger D. C., Williams R. H., Socolow R. H.. Baseload wind energy: modeling the competition between gas turbines and compressed air energy storage for supplemental generation. Energy Policy. 2007 ; 35: 1474-1492
3. United Nations Development Programme. Human development report 2001: making new technologies work for human development, Oxford University Press, Oxford, 2001.
4. Denkenberger, D. C. and Pearce, J. M. Compound parabolic concentrators for solar water heat pasteurization: numerical simulation. In Proceedings of the Solar Cookers International Conference, Granada, Spain, 12-16 July 2006.
5. McQuiston F. C., Parker J. D., Spitler J. D. Heating, ventilating, and air conditioning analysis and design. 6. 2005 (New York, USA, John Wiley & Sons, Inc.), 623-623. New York, USA: John Wiley & Sons, Inc. ; 2005: 623-623.
6. Doty, F. D., Hosford, G., Jones, J. D., and Spitzmesser, J. B. A laminar-flow heat exchanger. In Proceedings of the Intersociety energy conversion engineering conference, Reno, Nevada, 12-17 August 1990, vol. 4, pp. 1-7 (American Institute of Chemical Engineers, New York).
7. Pearce, J. M., Denkenberger, D. C., and Zielonka, H. Energy conservation measures as investments. In Energy conservation: new research (Ed. G. Spadoni), 2009, ISBN: 978-1-60692-231-6, pp. 67-85 (Nova Science Publishers, Hauppauge, New York).
8. Ashman, S. and Kandlikar, S. A review of manufacturing processes for microchannel heat exchanger fabrication. In Proceedings of the Fourth International Conference on Nanochannels, microchannels and minichannels, Limerick, Ireland, 19-21 June 2006, Paper no. ICNMM2006-96121 pp. 855-860 (ASME, New York).
9. Lowenstein, A. A zero carryover liquid-desiccant air conditioner for solar applications. In Proceedings of the ASME international solar energy conference, Denver, Colorado, USA, 8-13 July 2006, paper no. ASME/SOLAR06 (ASME, New York).
10. Veltkamp, W. B. Heat exchanger. Patent number 5,725,051, United States, 10 March 1998.
11. Carman, B. G., Kapat, J. S., and Chow, L. C. Impact of a ceramic microchannel heat exchanger on a micro turbine. In Proceedings of the ASME turbo expo 2002: power for land, sea, and air (GT2002), Amsterdam, The Netherlands, 3-6 June 2002, Paper no. GT2002-30544, pp. 1053-1060 (ASME, New York).
12. Perry, C. R., Dietz, L. H., and Shannon, R. L. Heat exchange apparatus having thin film flexible sheets. Patent number 4,411,310, United States, 25 October 1983.
13. Ramm-schmidt, L. Apparatus for heat transfer between gas flows. Patent number 6,758,261, United States, 6 July 2004.
14. Bachmann, F. G. and Russek, U. A. Laser welding of polymers using high power diode lasers. In Proceedings of the Photonics West 2002 Conference, San Jose, CA, USA, 21-25 January 2002.
15. Garst, S., Schuenemann, M., Solomon, M., Atkin, M., and Harvey, E. Fabrication of multilayered microfluidic 3D polymer packages. In Proceedings of the 2005 electronic components and technology conference, Lake Buena Vista, FL, 31 May-3 June 2005, vol. 1, pp. 603-610 (IEEE, Piscataway, New Jersey).
16. Doalman, J. D. B. The mystery of electronic water treatment unveiled. Industrial Technology News, 25 November 2005.
17. Shah R. K., Focke W. W. Heat transfer equipment design. Shah R. K. Subbarao E. C. Mashelkar R. A., ed. Washington, DC: Hemisphere Publishing ; 1988: 227-254.
18. Goddard, J. B. Abrasion resistance of piping systems. ADS, Findlay, Ohio, 1994.
19. Powell, M. R., Hong, S. H., and Paulsen, S. Recirculating thermocatalytic air purifier for collective protection. In Proceedings of the NBC Defense Collective Protection Conference, Orlando, Florida, 29-31 October 2002.
20. Ahuja V., Green R.. Carbon dioxide removal from air for alkaline fuel cells operating with liquid hydrogen: a synergistic advantage. Int. J. Hydrogen Energy. 1998 ; 23 (2). 131-137
21. Wilson, D. G. Wilson turbopower's David Gordon Wilson presents seminal scientific paper at international turbine congress; peer-reviewed paper outlines the theory and design of Wilson turbopower's new revolutionary heat exchanger. Business Wire, 15 May 2006.
22. Creare. Heat exchangers, 2007, available from http://www.creare.com/ services/fluid/heat-ex.html (access date 23 March 2007).
23. Ganzevles, F. L. A. Drainage and condensate heat resistance in dropwise condensation of multicomponent mixtures in a plastic plate heat exchanger. PhD Thesis, Technishe Universiteit Eindhoven, 2002.
24. Hart, G. K., Lee, C.-o., and Latour, S. R. Development of plastic heat exchangers for ocean thermal energy conversion, A092503, January 1979, p. 141.
25. Greenbox. Greenbox index, 2008, available from http://www.greenbox.uk. com/ (access date 1 April 2008).
26. Ogando, J. And now - an injection-molded heat exchanger. Design News Materials Editor, U.S. - Global Design News, 1 November 2000.
27. Denkenberger, D. C. Microchannel expanded heat exchanger. Provisional patent application no. 61/265,967, USA, December 2009.
28. FUJIFILM Dimatix, Inc. Materials printer, cartridges & printheads, DMP-3000, DMC-11601/11610, SX3, SE3, SE-DPN, D-128/1 DPN and D-128/10 DPN Datasheet, FUJIFILM Dimatix, Inc., Santa Clara, California, 2011.
29. Leaversuch, R. Laser welding comes of age, 2007, available from http://www.ptonline.com/articles/200202fa2.html (access date 23 March 2007).
30. Jeffrey, F. Photovoltaic manufacturing technology monolithic amorphous silicon modules on continuous polymer substrates, NREL/SR-520-27960, National Renewable Energy Laboratory, Golden, Colorado, March 2000.
31. Denkenberger, D. C. Low cost high-effectiveness microchannel heat exchanger: fabrication, modeling, and validation. Dissertation, Civil Engineering, University of Colorado at Boulder, 2010.
32. Polley G. T., Abu-Khader M. M.. Compensating for end effects in plate-and-frame heat exchangers. Heat Transfer Eng.. 2005 ; 26 (10). 3-7
33. Gotovsky M. A., Fedorovich E. D., Firsova E. V., Blagoveshchensky A. J. N., Mizonov V., Piskunov V. N., Vinokurov V. F.. Thermal effectiveness of heat exchangers: Effect of manufacturing inaccuracies and deformation of tube bundles. Heat Transfer Eng.. 1984 ; 6 (1). 52-57
34. Venkatarathnam G., Sarangi S.. An apparatus for the testing of small cryogenic heat exchangers. Rev. Sci. Instrum.. 1996 ; 67 (2). 584-588
35. Smith E. M. Advances in thermal design of heat exchangers: a numerical approach: direct-sizing, step-wise rating, and transients. Chichester: John Wiley & Sons ; 2005 :
36. Askeland D. R. The science and engineering of materials. 3. 1994 (Boston, Massachusetts, PWS Publishing Company). Boston, Massachusetts: PWS Publishing Company ; 1994 :
37. Davies G. D., Edington J. W., Cutler C. P., Padmanabhan K. A.. Superplasticity: a review. J. Mater. Sci.. 1970 ; 5: 1091-1102