Failure mode and effect analysis in asset maintenance: A multiple case study in the process industry

International Journal of Production Research

Volumn 51, Issue 4, 2013, Pages 1055-1071

  Braaksma, A J J ^a   Klingenberg, W ^a   Veldman, J ^b  

^a UNIVERSITY OF GRONINGEN   (Netherlands)

^b UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

Asset information management; Failure mode and effects analysis (FMEA); Process industry; Reliability centred maintenance (RCM)

Indexed keywords

CONCEPT DESIGNS; DESIGN ENGINEERING; EMPIRICAL EVIDENCE; EXPERT JUDGEMENT; FAILURE MODE AND EFFECT ANALYSIS; FAILURE MODE AND EFFECTS ANALYSIS; INDUSTRIAL PRACTICES; MULTIPLE-CASE STUDY; PREVENTIVE MAINTENANCE PLANNING; PROCESS INDUSTRIES; RELIABILITY-CENTRED MAINTENANCE;

INDUSTRIAL MANAGEMENT; INFORMATION MANAGEMENT; PREVENTIVE MAINTENANCE; RESEARCH;

INDUSTRY;

EID: 84871306960     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207543.2012.674648     Document Type: Article

References (45)

1. Arts, R., Knapp, G., and Mann, L., 1998. Some aspects of measuring maintenance performance in the process industry. Journal of Quality in Maintenance Engineering, 4 (1), 6-11.
2. August, J.K., 2003. RCM guidebook: building a reliable plant maintenance program. Tulsa, OK: PennWell Books.
3. Azadeh, A., Ebrahimipour, V., and Bavar, P., 2010. A fuzzy inference system for pump failure diagnosis to improve maintenance process: the case of a petrochemical industry. Expert Systems with Applications, 37 (1), 627-639.
4. Bloom, N.B., 2006. Reliability centered maintenance - implementation made simple. New York: McGraw-Hill.
5. Braaksma, A.J.J., Klingenberg, W., and van Exel, P.H.W.M., 2011. A review of the use of asset information standards for collaboration in the process industry. Computers in Industry, 62 (3), 337-350. BS5760, 2009. Part 5. London: British Standards Institution, 3.
6. Cox, J. F. and Blackstone, J. H., 1995. APICS Dictionary. Falls Church: American Production and Inventory Control Society.
7. Dennis, D. and Meredith, J., 2000. An empirical analysis of process industry transformation systems. Management Science, 46 (8), 1085-1099.
8. Dieter, G., 2000. Engineering design: a materials and processing approach. New York: McGraw-Hill.
9. DoD, 1980. MIL-STD 1629A: procedures for performing a failure mode, effects and criticality analysis. Washington, DC: Department of Defense.
10. Down, M., Brozowski, L., and Younis, H., 2008. Potential failure mode and effects analysis (FMEA). Auburn Hills, MI: Chrysler LLC, Ford Motor Company, General Motors Corporation.
11. Dul, J. and Hak, T., 2008. Case study methodology in business research. Amsterdam, The Netherlands: Butterworth-Heinemann.
12. Eisenhardt, K.M., 1989. Building theories from case study research. Academy of Management Review, 14 (4), 532-550.
13. Eisenhardt, K.M. and Graebner, M., 2007. Theory building from cases: opportunities and challenges. Academy of Management Journal, 50 (1), 25-32.
14. Fransoo, J.C. and Rutten, W.G.M.M., 1994. A typology of production control situations in process industries. International Journal of Operations and Production Management, 14 (12), 47-57.
15. Gabbar, H.A., et al., 2003. Computer-aided RCM-based plant maintenance management system. Robotics and Computer Integrated Manufacturing, 19 (5), 449-458.
16. Garg, A. and Deshmukh, S.G., 2006. Maintenance management: literature review and directions. Journal of Quality in Maintenance Engineering, 12 (3), 205-238.
17. Gunasekaran, A., 1998. Concurrent engineering: a competitive strategy for process industries. Intelligent Management Systems in Operations, 49 (7), 758-765.
18. Hu, H., et al., 2009. Risk-based maintenance strategy and its applications in a petrochemical reforming reaction system. Journal of Loss Prevention in the Process Industries, 22 (4), 392-397.
19. Kans, M., 2008. An approach for determining the requirements of computerised maintenance management systems. Computers in Industry, 59 (1), 32-40.
20. Ketokivi, M. and Jokinen, M., 2006. Strategy, uncertainty, and the focused factory in international process manufacturing. Journal of Operations Management, 24 (3), 250-270.
21. McCutcheon, D. and Meredith, J., 1993. Conducting case study research in operations management. Journal of Operations Management, 11 (3), 239-256.
22. McDermott, R.E., Mikulak, R.J., and Beauregard, M.R., 2009. The basics of FMEA. New York: CRC Press.
23. Meredith, J., 1987. Automating the factory: theory versus practice. International Journal of Production Research, 25 (10), 1493-1510.
24. Mobley, R.K. and Smith, R., 2002. Maintenance engineering handbook. New York: McGraw-Hill.
25. Moubray, J., 1992. Reliability-centered maintenance. New York: Industrial Press.
26. Picknell, J.V., 1999. The Reliability Handbook, Chapter 3: Is RCM the right tool for you? PEM Plant Engineering and Maintenance, 23 (6), 23-36.
27. Riezebos, J., Klingenberg, W., and Hicks, C., 2009. Lean production and information technology: connection or contradiction? Computers in Industry, 60 (4), 237-247.
28. Rosqvist, T., Laakso, K., and Reunanen, M., 2009. Value-driven maintenance planning for a production plant. Reliability Engineering and System Safety, 94 (1), 97-110.
29. Schuman, C.A. and Brent, AC., 2005. Asset life cycle management: towards improving physical asset performance in the process industry. International Journal of Operations and Production Management, 25 (6), 566-579.
30. Seyed-Hosseini, S.M., Safaei, N., and Asgharpour, M.J., 2006. Reprioritization of failures in a system failure mode and effects analysis by decision making trial and evaluation laboratory technique. Reliability Engineering and System Safety, 91 (8), 872-881.
31. Siggelkow, N., 2007. Persuasion with case studies. Academy of Management Journal, 50 (1), 20-24.
32. SINTEF, 2002. OREDA handbook. Trondheim, Norway: OREDA participants.
33. Smith, M. and Hinchcliffe, G.R., 2004. RCM-Gateway world class maintenance. Oxford: Elsevier Butterworth-Heinemann.
34. Stamatis, D.H., 2003. Failure mode and effect analysis: FMEA from theory to execution. Perth, Australia: Quality Press.
35. Summers, A.E., 1998. Techniques for assigning a target safety integrity level. ISA Transactions, 37 (2), 95-104.
36. Tan, J. and Kramer, M., 1997. A general framework for preventive maintenance optimization in chemical process operations. Computers and Chemical Engineering, 21 (12), 1451-1469.
37. Tsang, A.H.C., 2002. Strategic dimensions of maintenance management. Journal of Quality in Maintenance Engineering, 8 (1), 7-39.
38. UMD, 2010. FMECA/FMEA programs. Maryland, MD: University of Maryland.
39. Veenman, A. and Besselink, L., 2010. Asset owners and maintenance. Breda. The Netherlands: Program Office WCM.
40. Veldman, J., Klingenberg, W., and Wortmann, J.C., 2011. Managing condition based maintenance technology: a multiple case study in the process industry. Journal of Quality in Maintenance Engineering, 17 (1), 40-62.
41. Waeyenbergh, G. and Pintelon, L., 2002. A framework for maintenance concept development. International Journal of Production Economics, 77 (3), 299-313.
42. Waeyenbergh, G. and Pintelon, L., 2004. Maintenance concept development: a case study. International Journal of Production Economics, 89 (3), 395-405.
43. Waeyenbergh, G. and Pintelon, L., 2009. CIBOCOF: a framework for industrial maintenance concept development. International Journal of Production Economics, 121 (2), 633-640.
44. Wilson, P.F., Dell, L.D., and Anderson, G.F., 1993. Root cause analysis: a tool for total quality management. Madison, WI: ASQ.
45. Yin, R.K., 1994. Case study research: design and methods. Newbury Park, CA: Sage.