Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600°C

Nature Materials

Volumn 12, Issue 1, 2013, Pages 40-46

  Bale, Hrishikesh A ^a   Haboub, Abdel ^b   Macdowell, Alastair A ^b   Nasiatka, James R ^b   Parkinson, Dilworth Y ^b   Cox, Brian N ^c   Marshall, David B ^c   Ritchie, Robert O ^a,b  

^a University of California Berkeley   (United States)

^b LAWRENCE BERKELEY NATIONAL LABORATORY   (United States)

^c TELEDYNE SCIENTIFIC COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DAMAGE EVOLUTION; EMERGING MATERIALS; EXTREME ENVIRONMENT; FAILURE EVENTS; FAILURE RISK; HIGH-FIDELITY SIMULATIONS; HOSTILE ENVIRONMENTS; MECHANICAL TOUGHNESS; MICRO-STRUCTURAL; NATURAL TISSUES; OPERATING CONDITION; QUANTITATIVE IMAGING; SAFE OPERATION; SMALL CRACK; SYNCHROTRON X RAYS; THREE-DIMENSIONAL OBSERVATIONS;

CRACKS; TISSUE;

CERAMIC MATRIX COMPOSITES;

ARTICLE; CERAMICS; CHEMISTRY; COMPUTER ASSISTED TOMOGRAPHY; EQUIPMENT FAILURE; EQUIPMENT FAILURE ANALYSIS; INSTRUMENTATION; METHODOLOGY; SYNCHROTRON;

CERAMICS; EQUIPMENT FAILURE; EQUIPMENT FAILURE ANALYSIS; SYNCHROTRONS; TOMOGRAPHY, X-RAY COMPUTED;

EID: 84871290227     PISSN: 14761122     EISSN: 14764660     Source Type: Journal    
DOI: 10.1038/nmat3497     Document Type: Article

References (23)

1. Stock, S. R. Recent advances in X-Ray microtomography applied to materials. Int. Mater. Rev. 53, 129-181 (2008
2. Sakdinawat, A. & Attwood, D. Nanoscale X-Ray imaging. Nature Photon. 4, 840-848 (2010
3. Marshall, D. B. & Cox, B. N. Integral textile ceramic structures. Annu. Rev. Mater. Res. 38, 425-443 (2008
4. Schmidt, S. et al. Ceramic matrix composites: A challenge in space-propulsion technology applications. Int. J. Appl. Ceram. Technol. 2, 85-96 (2005
5. Mouritz, A. P., Bannister, M. K., Falzon, P. J. & Leong, K. H. Review of applications for advanced three-Dimensional fibre textile composites. Composite A 30, 1445-1461 (1999
6. Morscher, G. N. & Pujar, V. V. Design guidelines for in-plane mechanical properties of SiC fiber-Reinforced melt-infiltrated SiC composites. Int. J. Appl. Ceram. Technol. 6, 151-163 (2009
7. Zhao, J. C. & Westbrook, J. H. Ultrahigh-Temperature materials for jet engines. Mater. Res. Soc. Bull. 28, 622-630 (2003
8. Raj, R., Scarmi, A. & Soraru, G. D. The role of carbon in unexpected visco(an)elastic behavior of amorphous silicon oxycarbide above 1273 K. J. Non-Cryst. Solids 351, 2238-2243 (2005
9. Zhuang, W., Barter, S. & Molent, L. Flight-By-flight fatigue crack growth life assessment. Int. J. Fatigue 29, 1647-1657 (2007
10. Novak, M. D. & Zok, F. W. High-Temperature materials testing with full-field strain measurement: Experimental design and practice. Rev. Sci. Instrum. 82, 115101 (2011
11. Terzi, S. et al. In situ X-Ray tomography observation of inhomogeneous deformation in semi-Solid aluminium alloys. Scr. Mater. 61, 449-452 (2009
12. Kinney, J. H. & Nichols, M. C. X-Ray tomographic microscopy (XTM) using synchrotron radiation. Annu. Rev. Mater. Sci. 22, 121-152 (1992
13. Langer, M., Cloetens, P., Guigay, J-P. & Peyrin, F. Quantitative comparison of direct phase retrieval algorithms in in-line phase tomography. Med. Phys. 35, 4556-4566 (2008
14. Groso, A., Abela, R. & Stampanoni, M. Implementation of a fast method for high resolution phase contrast tomography. Opt. Express 14, 8103-8110 (2006
15. Berbon, Z., Rugg, K. L., Dadkhah, M. S. & Marshall, D. B. Effect of weave architecture on tensile properties and local strain heterogeneity in thin-Sheet C-SiC composites. J. Am. Ceram. Soc. 85, 2039-2048 (2002
16. Chateau, C. et al. In situ X-Ray microtomography characterization of damage in SiCf=SiC minicomposites. Compos. Sci. Technol. 71, 916-924 (2011
17. Budiansky, B., Evans, A. G. & Hutchinson, J. W. Fiber matrix debonding effects on cracking in aligned fiber ceramic composites. Int. J. Solids Struct. 32, 315-328 (1995
18. Morscher, G. N. Tensile stress rupture of SiCf=SiCm minicomposites with carbon and boron nitride interphases at elevated temperatures in air. J. Am. Ceram. Soc. 80, 2029-2042 (1997
19. Marshall, D. B., Cox, B. N. & Evans, A. G. The mechanics of matrix cracking in brittle matrix fiber composites. Acta Metall. Mater. 33, 2013-2021 (1985
20. Morscher, G. N., Martinez-Fernandez, J. & Purdy, M. J. Determination of interfacial properties using a single-fiber microcomposite test. J. Am. Ceram. Soc. 79, 1083-1091 (1996
21. Okabe, T., Nishikawa, M. & Curtin, W. A. Estimation of statistical strength distribution of carborundum polycrystalline SiC fiber using the single fiber composite with consideration of the matrix hardening. Compos. Sci. Technol. 68, 3067-3072 (2008
22. Cox, B. N., Marshall, D. B. & Thouless, M. D. Influence of statistical fiber strength distribution on matrix cracking in fiber composites. Acta Metall. Mater. 37, 1933-1943 (1989
23. Muench, B., Trtik, P., Marone, F. & Stampanoni, M. Stripe and ring artifact removal with combined wavelet fourier filtering. Opt. Express 17, 8567-8591 (2009