Rheological and kinetic characterization of UV photopolymerizable formulations as a function of the boehmite nanoparticle content

Open Materials Science Journal

Volumn 6, Issue , 2012, Pages 68-76

  Frigione, M ^a   Corcione, C Esposito ^a  

^a UNIVERSITY OF SALENTO   (Italy)

Author keywords

Bohemite nanoparticles; Kinetics; Photo DSC; Photopolymerizable acrylic resins; Rheology; UV curing

Indexed keywords

ACRYLIC RESINS; CALORIMETRIC ANALYSIS; EXPERIMENTAL INVESTIGATIONS; FTIR SPECTROSCOPY; HEAT OF REACTION; HIGH MOLECULAR WEIGHT; KINETIC BEHAVIOR; KINETIC CHARACTERIZATION; KINETIC REACTIONS; MODEL PREDICTION; NITROGEN ATMOSPHERES; PARALLEL PLATES; PHOTO-DSC; POLYSILOXANE MONOMER; RADICAL PHOTOPOLYMERIZATION; SILANE COUPLING AGENT; SURFACE PROTECTION; TEST CONDITION; THEORETICAL MODELS; UV COATINGS; UV-CURING; VISCOSITY CURVE;

COUPLING AGENTS; CURING; ENZYME KINETICS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; NANOPARTICLES; PHOTOPOLYMERIZATION; POLYMERIZATION; REACTION RATES; RESINS; RHEOLOGY; SHEAR DEFORMATION; SILANES; SILICONES; ULTRAVIOLET RADIATION; VISCOSITY;

KINETICS;

EID: 84870991693     PISSN: None     EISSN: 1874088X     Source Type: Journal    
DOI: 10.2174/1874088X01206010068     Document Type: Article

References (46)

1. Lazzarini M, Laurenzi TM. Il Restauro della Pietra. Padova, Italy: CEDAM: 1986.
2. Torrisi A. Evaluation of five fluorinated compounds as calcarenite protectives. J Cult Herit 2008; 9: 135-45.
3. Horie CV. Materials for Conservation. Oxford, UK: Butterworth-Heinemann 1987.
4. Toniolo L, Poli T, Castelvetro V, Manariti A, Chiantore O, Lazzari M. Tailoring new fluorinated acrylic copolymers as protective coatings for marble. J Cult Herit 2002; 3: 309-16.
5. Amoroso G. Trattato della scienza e conservazione dei monumenti. Firenze, Italy: Alinea Editrice 2002.
6. Miliani C, Ombelli M, Morresi A, Romani A. Spectroscopic study of acrylic resins in solid matrices. Surf Coating Technol 2002; 152: 276-80.
7. Hansen E, Lowinger R, Sadoff F. Consolidation of porous paint in a vapor-saturated atmosphere: a technique for minimizing changes in the appearance of powdering, matte paint. J Am Inst Conserv 1993; 32: 1-14.
8. Cardiano P, Sergi S, Lazzari M, Piraino P. Epoxy-silica polymers as restoration materials. Polymer 2002; 43: 6635-40.
9. Alessandrini G, Aglietto M, Castelvetro V, Ciardelli F, Peruz R, Toniolo L. Comparative evaluation of fluorinated and unfluorinated acrylic copolymers as water-repellent coating materials for stone. J Appl Polym Sci 2000; 76: 962-77.
10. Chiantore O, Lazzari M. Photo-oxidative stability of paraloid acrylic protective polymers. Polymer 2001; 42: 17-27.
11. Hansen CM. Water transport and condensation in fluoropolymer films. Progr Org Coating 2001; 42: 167-78.
12. Della VC, Penati A, Peruzzi R, Siboni S, Toniolo L, Colombo C. The combined effect of roughness and heterogeneity on contact angles: the case of polymer coating for stone protection. J Adhesion Sci Technol 2000; 14: 277-303.
13. Torrisi A. XPS study of five fluorinated compounds deposited on calcarenite stone. Appl Surf Sci 2008; 254: 2650-8.
14. Aglietto M, Castelvetro V, Ciardelli F, Fassina V, Botteghi C, Matteoli U. Designing fluorinated polymers as durable, highly efficient coating materials for stone protection. 5th International Symposium on the Conservation of Monuments in the Mediterranean Basin. Seville Spain 2000.
15. Kotlik P, Ignas J, Zelinger J. Some ways of polymerizing methyl methacrylate in sandstone. Stud Conserv 1980; 25: 1-13.
16. Priest C, Stevens N, Sedev R, Skinner W, Ralston J. Inferring wettability of heterogeneous surfaces by ToF-SIMS. J Colloid Interface Sci 2008; 320: 563-8.
17. Lettieri M, Calia A, Mecchi AM, Quarta G. Consolidation treatments on highly porous calcareous stone: a review of methodologies and products. Proceedings of 6th International Sympsium on the Conservation of Monuments in the Mediterranean Basin. Lisbon Portugal 2004.
18. Kulinich SA, Farzaneh M. Hydrophobic properties of surfaces coated with fluoroalkylsiloxane and alkylsiloxane monolayers. Surf Sci 2004; 573: 379-90.
19. Fort Gonzalez R, Lopéz de Azcona MC, Mingarro MF, Alvarez de BM, Rodriguez BJ. A comparative study of the efficiency of siloxanes, methacrylates and microwax-based treatments applied to the stone materials of the Royal Palace of Madrid, Spain. Proceedings of 9th International Congress on Deterioration and Conservation of Stone; Eds. V. Fassina. Amsterdam, The Netherlands: Elsevier 2000.
20. Greco A, Licciulli A, Maffezzoli A. Stereolitography of ceramic suspensions. J Mater Sci 2001; 36: 99-105.
21. Esposito CC, Greco A, Montagna F, Licciulli A, Maffezzoli A. Silica moulds built by stereolithography. J Mater Sci 2005; 40: 4899-904.
22. 3. J Eur Cer Soc 2005; 1581-9.
23. Grassia L, D'Amore A. Finite element calculation of residual stress in dental restorative material. AIP Conf Proc 2012; 1459: 312-5.
24. Nelson EW, Carter TP, Scranton AB. Fluorescence monitoring of cationic photopolymerizations: divinyl ether polymerizations photosensitized by anthracene derivatives. Macromol 1994; 27: 1013-9.
25. Decker C. Photoinitiated crosslinking polymerisation. Progr Polym Sci 1996; 21: 593-650.
26. Esposito CC, Previderio A, Frigione M. Kinetics characterization of a novel photopolymerizable siloxane-modified acrylic resin. Therm Acta 2010; 509: 56-61.
27. Esposito CC, Frigione M. Influence of stone particles on the rheological behavior of a novel photopolymerizable siloxanemodified acrylic resin. J Appl Polym Sci 2011; 122: 942-7.
28. Esposito CC, Frigione M. UV-cured siloxane-modified acrylic coatings containing birifrangent calcarenitic stone particles: photocalorimetric analysis and surface properties. Progr Org Coating 2011; 72: 522-7.
29. Esposito CC, Frigione M. UV-cured polymer-boehmite nanocomposite as protective coating for wood elements. Progr Org Coating 2012; 74: 781-7.
30. Esposito CC, Frigione M. Factors influencing photo-curing kinetics of novel UV-cured siloxane-modified acrylic coatings: oxygen inhibition and composition. Therm Acta 2012; 534: 21-7.
31. Di Lorenzo ML, Frigione M. Compatibilization criteria and procedures for binary blends: a review. J Polym Eng 1997; 17: 429-59.
32. Fouassier JP. Photoinitiation, photopolymerization and photocuring. New York: Hanser Publishers 1995.
33. Decker C, Jenkins AD. Kinetic approach of oxygen inhibition in ultraviolet-and laser-induced polymerizations. Macromol 1985; 18: 1241-4.
34. Hoyle CE, Keel M, Kim KJ. Photopolymerization of 1,6-hexanediol diacrylate with deoxybenzoin as photoinitiator. Polymer 1988; 29: 2033-40.
35. Lionetto F, Frigione M. Mechanical and natural durability properties of wood treated with a novel organic preservative/consolidant product. Mater Design 2009; 30: 3303-7.
36. Lionetto F, Frigione M. Effect of novel consolidants on mechanical and absorption properties of deteriorated wood by insect attack. J Cult Herit 2012; 13: 195-203.
37. Kim HK, Ju HT, Hong JW. Characterization of UV-cured polyester acrylate films containing acrylate functional polydimethylsiloxane. Eur Polym J 2003; 39: 2235-41.
38. Tryson GR, Schultz AR. A calorimetric study of acrylate photopolymerization. J Polym Sci B Polym Phys 1979; 17: 2059-75.
39. Lee TY, Guymon CA, Sonny JE, Hoyle CE. The effect of monomer structure on oxygen inhibition of (meth)acrylates photopolymerization. Polymer 2004; 45: 6155-62.
40. Goodnera MD, Bowman CN. Development of a comprehensive free radical photopolymerization model incorporating heat and mass transfer effects in thick films. Chem Eng Sci 2002; 57: 887-900.
41. Studer K, Decker C, Beck E, Schwalm R. Overcoming oxygen inhibition in UV-curing of acrylate coatings by carbon dioxide inerting, Part I. Progr Org Coating 2003; 48: 92-100.
42. Chen Q, Udomsangpetch C, Shen SC, Liu YC, Chen Z, Zeng XT. The effect of AlOOH boehmite nanorods on mechanical property of hybrid composite coatings. Thin Solid Films 2009; 517: 4871-4.
43. Kerbouch P, Lebaudy P, Lecamp L, Bunel C. Numerical simulation to correlate photo-polymerization kinetics monitoring by RTNIRspectroscopy and photocalorimetry. Therm Acta 2004; 410: 73-8.
44. Lettieri M, Lionetto F, Frigione M, Prezzi L, Mascia L. Cold-cured epoxy-silica hybrids: Effects of large variation in specimen thickness on the evolution of the Tg and related properties. Polym Eng Sci 2011; 51: 358-68.
45. Esposito CC, Frigione M. A novel procedure able to predict the rheological behavior of trifunctional epoxy resin/hyperbranched aliphatic polyester mixtures. Polym Test 2009; 28: 830-5.
46. Dealy JM, Wissbrun KF, Reinhold V. Melt Rheology and its role in plastics processing theory and applications. New York: Van Nostrand Reinhold 1990.