Rapid prototyping of aerodynamics research models

Applied Mechanics and Materials

Volumn 217-219, Issue , 2012, Pages 2016-2025

  Shun, Simon ^a   Ahmed, Noor Alam ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

Aerodynamic research models; Fused deposition modeling; Polymers; Rapid prototyping; Selective laser sintering; Stereo lithography

Indexed keywords

2-D SLICE; 3-D PRINTING; 3-DIMENSIONAL; 3D OBJECT; 3D PRINTING PROCESS; ADDITIVE MANUFACTURING; ADJACENT SURFACES; AERODYNAMIC RESEARCH; DESIGN PROCESS; EXTERNAL FEATURES; FABRICATION PROCESS; FABRICATION TIME; FUSED DEPOSITION MODELING; HOLLOW SECTION; INTERNAL FEATURES; LOSS OF ACCURACY; MANUFACTURING ISSUE; POTENTIAL LOSS; PROCESSING TIME; RESEARCH MODELS; SELECTIVE LASER SINTERING; TRADITIONAL COMPUTERS; WIND TUNNEL MODELS;

AERODYNAMICS; COMPUTER CONTROL SYSTEMS; DESIGN; FABRICATION; LASER HEATING; POLYMERS; PRINTING; RAPID PROTOTYPING; RESEARCH; THREE DIMENSIONAL COMPUTER GRAPHICS;

THREE DIMENSIONAL;

EID: 84870504530     PISSN: 16609336     EISSN: 16627482     Source Type: Book Series    
DOI: 10.4028/www.scientific.net/AMM.217-219.2016     Document Type: Conference Paper

References (43)

1. Ahmed, N.A., Elder, R.L., Foster, C.P. & Jones, J.D.C., "A Novel 3D Laser Anemometer for Boundary Layer Studies," ASME Conf., Boston, USA, 15th December 1987. Also in the 3rd International Symposium on Laser Anemometry, edited by Dybs, A. et al, ASME, The Fluids Engineering Division, Vol. 55, pp.175-178.
2. Ahmed, N.A., Elder, R.L., Foster, C.P. & Jones, J.D.C., "Miniature Laser Anemometer for 3D Measurements," Engineering Optics, Vol. 3, No. 2, 1990, pp.191-196.
3. Ahmed, N.A., Elder, R.L., Foster, C.P. & Jones, J.D.C, "Laser Anemometry in Turbomachines," IMechE Proc, Part G, J of Aerospace Engineering, Vol. 205, 1991, pp.1-12.
4. Ahmed, N.A., Elder, R.L., Foster, C.P. & Jones, J.D.C, "Fibre Optic Laser Anemometry for Turbo machinery Applications," Optics and Lasers in Engineering, Vol. 15, No. 2-3, 1992, pp.193-205.
5. Ahmed, N.A. & Elder, R.L., "Flow Behavior in a High Speed Centrifugal Impeller Passage under Design and Off-design Operating Conditions," Fluids and Thermal Engineering, JSME International series B, Vol.43, No.1, 2000, pp. 22-28.
6. Gatto, A., Byrne, K.P., Ahmed, N.A. & Archer, R.D., "Pressure Measurements over a Cylinder in Crossflow using Plastic Tubing," Experiments in Fluids, Vol. 30, Iss. 1, 2001, pp. 43-46.
7. Ahmed, N.A., "Implementation of a momentum integral technique for total drag measurement," International Journal of Mechanical Engineering and Education, Vol.30, No.4, 2002.
8. Pissasale, A., &Ahmed, N.A., "Theoretical calibration of a five hole probe for highly three dimensional flow," International Journal of Measurement Science and Technology, Vol. 13, July, 2002, pp.1100-1107.
9. Pissasale, A., & Ahmed, N.A., "A novel method of extending the calibration range of five hole probe for highly three dimensional flows," Journal of Flow Measurement and Instrumentation, vol. 13, issues 1-2, March-April, 2002, pp 23-30.
10. Pissasale, A., & Ahmed, N.A., "Examining the effect of flow reversal on seven-hole probe measurements," AIAA Journal, Vol. 41, No. 12, 2003, pp. 2460-2467.
11. Pissasale, A., & Ahmed, N.A., "Development of a functional relationship between port pressures and flow properties for the calibration and application of multi-hole probes to highly three-dimensional flows," Experiments in Fluids, Vol. 36, No.3, 2004, pp. 422-436.
12. Lien, J. & Ahmed, N.A., "An examination of the suitability of multi-hole pressure probe technique for skin friction measurement in turbulent flow," in press, Journal of Flow Measurement and Instrumentation, Vol. 22, 2011, pp. 153-164.
13. Ahmed, N.A., "Detection of Separation bubble using spectral analysis of fluctuating surface pressure," International Review of Aerospace Engineering', Vol.4, No. 4, 2011.
14. Simpson, R.G., Ahmed, N.A. & Archer, R.D., "Improvement of a Wing Performance using Coanda Tip Jets," Journal of Aircraft, Vol. 37, No. 1, 2000, pp.183-184.
15. Ahmed, N.A. & Archer, R.D., "Performance Improvement of a Bi-plane with Endplates," Journal of Aircraft, Vol.38, No.2, 2001, pp. 398-400.
16. Ahmed, N.A. & Archer, R.D., "Post-Stall Behavior of a Wing under Externally Imposed Sound," Journal of Aircraft, Vol. 38, No.5, 2001, pp. 961-963.
17. Simpson, R.G., Ahmed, N.A. & Archer, R.D., "Near Field Study of Vortex Attenuation using Wing Tip Blowing", The Aeronautical Journal, Vol. 102, March, 2002.
18. Ahmed, N.A. & Goonaratne, J., "Lift augmentation of a low aspect ratio thick wing at a very low angle of incidence operating in ground effect," Journal of Aircraft, Vol. 39, No.2, 2002.
19. Ahmed, N.A., "An acoustic energy concept for the design of a flow meter," International Journal of Vibration and Acoustics, Vol.8, No.1, 2003, pp. 52-58.
20. Longmuir, M. & Ahmed, N.A., "Commercial Aircraft Exterior Cleaning Optimization," Journal of Aircraft, Vol. 46, No. 1, 2009, pp. 284-290.
21. Wu, C. & Ahmed, N.A., "Numerical Study of Transient Aircraft Cabin Flowfield with Unsteady Air Supply," Journal of Aircraft, Vol. 48, no.6, 2011, pp. 2164-2169.
22. Wu, C. & Ahmed, N.A., "Application of Flow Control Technique for Indoor Ventilation," proceedings, Evolving Energy-IEF International Energy Congress, Sydney; 2012.
23. Matsoukas, G, & Ahmed, N.A., "Experimental Investigation of Employing Asymmetrical Electrodes in Propulsion of Vehicles," proceedings, Evolving Energy-IEF International Energy Congress, Sydney; 2012.
24. Riazi, H. & Ahmed, N.A., "Effect of the ratio of specific heats on a small scale solar Brayton cycle," proceedings, Evolving Energy-IEF International Energy Congress, Sydney; 2012.
25. Yen, J. & Ahmed, N.A., "Improving the Safety and Performance of Small-Scale Vertical Axis Wind Turbine," proceedings, IEF International Energy Congress, Sydney, 2012.
26. Wongpanyathaworn, M., & Ahmed, N.A., "Optimising louver locations to improve indoor thermal comfort based on natural ventilation," proceedings, Evolving Energy-IEF International Energy Congress, Sydney; 2012.
27. Findanis, N. & Ahmed, N.A., "Control and Management of Particulate Emissions using Improved Reverse Pulse-Jet Cleaning Systems," proceedings, Evolving Energy-IEF International Energy Congress, Sydney; 2012.
28. Flynn, T.G., Behfarshad, G. & Ahmed, N.A., "Development of a Wind Tunnel Test Section to Simulate the Effect of Rain on roof ventilation systems and environmental measuring devices," proceedings, Evolving Energy-IEF International Energy Congress, Sydney; 2012.
29. Zheng, Y.Y., Ahmed, N.A. & Zhang, W., "Impact Analysis of Varying Strength Counter-flow Jet Ejection on a Blunt Shaped Body in A Supersonic Flow," in press, Advances and Applications in Fluid Mechanics.
30. Matsoukas, G. & Ahmed, N.A., "Investigation of Ionic Wind as a Means of Generating Propulsive Force," in press, International Review of Aerospace Engineering.
31. Wallis, R. A., "The Use of Air Jets for Boundary Layer Control," Aerodynamic Research Laboratories, Aero Note 110, Melbourne, Australia, 1952.
32. Selby, G. V., Lin, J. C., and Howard, E. G., "Control of Low-Speed Turbulent Separated Flow Using Jet Vortex Generators," Experiments in Fluids, Vol. 12, No. 6, 1992, pp. 394-400.
33. Bridges, A., and Smith, D. R., "Influence of Orifice Orientation on a Synthetic Jet-Boundary Layer Interaction," AIAA Journal, Vol. 41, No. 12, 2003, pp. 2394-2402.
34. Zhang, X., "An Inclined Rectangular Jet in a Turbulent Boundary Layer-Vortex Flow," Experiments in Fluids, Vol. 28, No. 4, 2000, pp. 344-354.
35. Johari, H., Zhang, Q., Rose, M. J., and Bourque, S. M., "Impulsively tarted Turbulent Jets," AIAA Journal, Vol. 35, No. 4, 1997, pp. 657-662.
36. Zhang, Q., and Johari, H., "Effects of Acceleration on Turbulent Jets," Physics of Fluids, Vol. 8, No.8, 1996, pp. 2185-2195.
37. Johari, H., Pacheco-Tougas, M., and Hermanson, J. C., "Penetration and Mixing of Fully Modulated Turbulent Jets in Crossflow," AIAA Journal, Vol. 37, No. 7, 1999, pp. 842-850.
38. Johari, H., and Rixon, G. S., "Effects of Pulsing on a Vortex Generator Jet," AIAA Journal, Vol. 41, No. 12, 2003, pp. 2309-2315.
39. Eroglu, A., and Breidenthal, R. E., "Structure, Penetration, and Mixing of Pulsed Jets in Crossflow," AIAA Journal, Vol. 39, No. 3, 2001, pp. 417-423.
40. Eroglu, A., and Breidenthal, R. E., "Exponentially Accelerating Jet in Crossflow," AIAA Journal, Vol. 36, No. 6, 1998, pp. 1002-1009.
41. Singh, C., Peake, D. J., Kokkalis, A., Khodagolian, V., Coton, F. N., and Galbraith, R. A. M., "Control of Rotorcraft Retreating Blade Stall Using Air-Jet Vortex Generators," Journal of Aircraft, Vol. 43, No. 4, 2006, pp. 1169-1176.
42. Krzysiak, A., "Control of Flow Separation Using Self-Supplying Air- Jet Vortex Generators," AIAA Journal, Vol. 46, No. 9, 2008, pp. 2229-2234.
43. Shun, S. & Ahmed, N.A., "Airfoil Separation Control Using Multiple-Orifice Air-Jet Vortex Generators," Journal of Aircraft, Vol. 48, No. 6, 2011, pp. 2164-2169.