Electrochemical performance of Li4Ti5O12/carbon nanofibers composite prepared by an in situ route for Li-ion batteries

Journal of Solid State Electrochemistry

Volumn 16, Issue 12, 2012, Pages 3915-3921

  Wu, Chun Yang ^a   Wang, Yu Xiang ^a   Xie, Jian ^a   Cao, Gao Shao ^a   Zhu, Tie Jie ^a   Zhao, Xin Bing ^a  

^a ZHEJIANG UNIVERSITY   (China)

Author keywords

Anode material; Carbon nanofibers; Conductive network; Li ion batteries; Rate capability; Spinel lithium titanate

Indexed keywords

ANODE MATERIAL; CONDUCTIVE NETWORKS; LI-ION BATTERIES; LITHIUM TITANATE; RATE CAPABILITIES;

ANODES; CARBON NANOFIBERS; CHEMICAL VAPOR DEPOSITION; CYCLIC VOLTAMMETRY; ELECTRIC CONDUCTIVITY; ELECTROCHEMICAL CELLS; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; FIELD EMISSION MICROSCOPES; SOLID STATE REACTIONS; TRANSMISSION ELECTRON MICROSCOPY; X RAY POWDER DIFFRACTION;

LITHIUM;

EID: 84870492108     PISSN: 14328488     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10008-012-1831-3     Document Type: Article

References (28)

1. Nakahara K, Nakajima R, Matsushima T, Majima H (2003) Preparation of particulate Li4Ti5O12 having excellent characteristics as an electrode active material for power storage cells. J Power Sources 117:131-136
2. Panero S, Satolli D, Salomon M, Scrosati B (2000) A new type of lithium-ion cell based on the Li4Ti5O12/Li2Co0.4Fe0.4Mn3.2O-8 high-voltage, electrode combination. Electrochem Commun 2:810-813
3. Lee SC, Lee SM, Lee JW, Lee JB, Lee SM, Han SS, Lee HC, Kim HJ (2009) Spinel Li4Ti5O12 nanotubed for energy storage materials. J Phys Chem C 113:18420-18423
4. Jaiswal A, Horne CR, Chang O, Zhang W, Kong W, Wang E, Chern T, Doeff MM (2009) Nanoscale LiFePO4 and Li4Ti5O12 for high rate Li-ion batteries. J Electrochem Soc 156:A1041-A1046
5. Vijayakumar M, Kerisit S, Rosso KM, Burton SD, Sears JA, Yang ZG, Graff GL, Liu J, Hu JZ (2011) Lithium diffusion in Li4Ti5O1-2 at high temperatures. J Power Sources 196:2211-2220
6. Zaghib K, Simoneau M, Armand M, Gauthier M (1999) Electrochemical study of Li4Ti5O12 as negative electrode for Li-ion polymer rechargeable batteries. J Power Sources 81:300-305
7. Kim HK, Bak SM, Kim KB (2010) Li4Ti5O12/reduced graphite oxide nano-hybrid material for high rate lithium-ion batteries. Electrochem Commun 12:1768-1771
8. Zhu N, Liu W, Xue MQ, Xie Z, Zhao D, Zhang MN, Chen JT, Cao TB (2010) Graphene as a conductive additive to enhance the highrate capabilities of electrospun Li4Ti5O12 for lithium-ion batteries. Electrochim Acta 55:5813-5818
9. Lin CY, Jhan YR, Duh JG (2011) Improved capacity and rate capability of Ru-doped and carbon-coated Li4Ti5O12 anode material. J Alloys Compd 509:6965-6968
10. Huang SH, Wen ZY, Zhang JC, Gu ZH, Xu XH (2006) Li4Ti5O12/ Ag composite as electrode materials for lithium-ion battery. Solid State Ionics 177:851-855
11. Kim J, Kim SW, Gwon H, Yoon WS, Kang K (2009) Comparative study of Li(Li1/3Ti5/3)O4 and Li(Ni1/2-xLi2x/3Tix/3)Ti3/2O4 (x01/3) anodes for Li rechargeable batteries. Electrochim Acta 54:5914-5918
12. Ji SZ, Zhang JY, Wang WW, Huang Y, Feng ZR, Zhang ZT, Tang ZL (2010) Preparation and effects of Mg-doping on the electrochemical properties of spinel Li4Ti5O12 as anode material for lithium ion battery. Mater Chem Phys 123:510-515
13. Li JR, Tang ZL, Zhang ZT (2005) Controllable formation and electrochemical properties of one-dimensional nanostructured spinel Li4Ti5O12. Electrochem Commun 7:894-899
14. Kim J, Cho J (2007) Spinel Li4Ti5O12 nanowires for high-rate Li-ion intercalation electrode. Electrochem Solid-State Lett 10:A81-A84
15. Ji LW, Yao YF, Toprakci O, Lin Z, Liang YZ, Shi Q, Medford AJ, Millns CR, Zhang XW (2010) Fabrication of carbon nanofiberdriven electrodes from electrospun polyacrylonitrile/polypyrrole bicomponents for high-performance rechargeable lithium-ion batteries. J Power Sources 195:2050-2056
16. Naoi K, Ishimoto S, Isobe Y, Aoyagi S (2010) High-rate nanocrystalline Li4Ti5O12 attached on carbon nano-fibers for hybrid supercapacitors. J Power Sources 195:6250-6254
17. Naoi K (2010) "Nanohybrid Capacitor":the next generation electrochemical capacitors. Full Cells 10:825-833
18. Huang S, Cai Q, Chen J, Qian Y, Zhang L (2009) Metal-catalystfree growth of single-walled carbon nanotubes on substrates. J Am Chem Soc 131:2094-2095
19. Liu BL, Ren WC, Gao LB, Li SS, Pei SF, Liu C, Jiang CB, Cheng HM (2009) Metal-catalyst-free growth of single-walled carbon nanotubes. J Am Chem Soc 131:2082-2083
20. Liu BL, Tang DM, Sun CH, Liu C, Ren WC, Li F, Yu WJ, Yin LC, Zhang LL, Jiang CB, Cheng HM (2011) Importance of oxygen in the metal-free catalytic growth of single-walled carbon nanotubes from SiOx by a vapor-solid-solid mechanism. J Am Chem Soc 133:197-199
21. Hirsch A (2009) Growth of single-walled carbon nanotubes without a metal catalyst -a surprising discovery. Angew Chem Int Ed 48:5403-5404
22. Aldon L, Kubiak P, Womes M, Jumas JC, Fourcade JO, Tirado JL, Corredor JO, Vicente CP (2004) Chemical and electrochemical Liinsertion into the Li4Ti5O12 spinel. Chem Mater 16:5721-5725
23. Zhang JH, Du J, Qian YT, Xiong SL (2010) Synthesis, characterization and properties of carbon nanotubes microspheres from pyrolysis of polypropylene and maleated polypropylene. Mater Res Bull 45:15-20
24. 2 nanocoating for a high-rate Li4Ti5O12 anode of a lithium-ion battery. J Am Chem Soc 134:7874-7879
25. Shen LF, Zhang XG, Uchaker E, Yuan CZ, Cao GZ (2012) Li4Ti5O12 nanoparticles embedded in a mesoporous carbon matrix as a superior anode material for high rate lithium ion batteries. Adv Funct Mater 2:691-698
26. Leftheriotis G, Papaefthimiou S, Yianoulis P (2007) Dependence of the estimated diffusion coefficient of LixWO3 films on the scan rate of cyclic voltammetry experiments. Solid State Ionics 178:259-263
27. 2 thin films prepared by RF magnetron sputtering. Solid State Ionics 179:362-370
28. Shenouda AY, Liu HK (2009) Studies on electrochemical behaviour of zinc-doped LiFePO4 for lithium battery positive electrode. J Alloy Compd 477:498-50-3