Mechanical and failure behaviour of hybrid polymer-metal staked joints

Materials and Design

Volumn 46, Issue , 2013, Pages 338-347

  Abibe, A B ^a   Amancio Filho, S T ^a   dos Santos, J F ^a   Hage, E ^b  

^a INSTITUTE OF MATERIALS RESEARCH   (Germany)

^b FEDERAL UNIVERSITY OF SÃO CARLOS   (Brazil)

Author keywords

Failure mode; Hybrid structure; Moisture content; Polymer metal joining; Short fibre composite; Staking

Indexed keywords

BASE MATERIAL; COMPLEX STRUCTURE; COMPUTER MICRO TOMOGRAPHIES; DRIVING FORCES; DUCTILE FAILURES; FAILURE BEHAVIOUR; HYBRID STRUCTURE; JOINING METHOD; JOINING TECHNIQUES; JOINING TECHNOLOGY; JOINT STRENGTH; LAP-SHEAR STRENGTH; MECHANICAL BEHAVIOUR; MECHANICAL FASTENING; MULTI-MATERIAL STRUCTURE; OVERLAP JOINTS; PERFORMANCE IMPROVEMENTS; PULL-OUT; SHORT FIBRE COMPOSITES; SITU STRAIN; STAKING; STRUCTURAL APPLICATIONS; TENSION FAILURE; TRANSPORTATION INDUSTRY; ULTIMATE TENSILE STRESS; WEIGHT REDUCTION;

FAILURE MODES; MOISTURE; SCANNING ELECTRON MICROSCOPY;

JOINING;

EID: 84870274894     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2012.10.043     Document Type: Article

References (28)

1. Amancio S.T., dos Santos J.F. Joining of polymers and polymer-metal hybrid structures: recent developments and trends. Polym Eng Sci 2009, 49:1461-1476.
2. Hundley J.M., Hahn H.T., Yang J.M., Facciano A.B. Three-dimensional progressive failure analysis of bolted titanium-graphite fiber metal laminate joints. J Compos Mater 2010, 45:751-769.
3. Içten B.M., Karakuzu R., Toygar M.E. Failure analysis of woven kevlar fiber reinforced epoxy composites pinned joints. Compos Struct 2006, 73:443-450.
4. Sen F., Pakdil M., Sayman O., Benli S. Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload. Mater Des 2008, 29:1159-1169.
5. Wang Z.Q., Zhou S., Zhang J.F., Wu X.D., Zhou L.M. Progressive failure analysis of bolted single-lap composite joint based on extended finite element method. Mater Des 2012, 37:582-588.
6. Yilmaz T., Sinmazcelik T. Geometric parameters and chemical corrosion effects on bearing strength of polyphenylenesulphide (PPS) composites. Mater Des 2007, 28:1695-1698.
7. Jung D.W., Kim J.S., Choi N.S. An experimental investigation of the static and fatigue fracture behaviour of hybrid composite/metal joints for a tilting car body. Fatigue Fract Eng Mater Struct 2009, 32:744-751.
8. Kweon J.-H., Jung J.-W., Kim T.-H., Choi J.-H., Kim D.-H. Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding. Compos Struct 2006, 75:192-198.
9. Moroni F., Pirondi A., Kleiner F. Experimental analysis and comparison of the strength of simple and hybrid structural joints. Int J Adhes Adhes 2010, 30:367-379.
10. Mouritz A.P. Review of z-pinned composite laminates. Compos A: Appl Sci Manuf 2007, 38:2383-2397.
11. Li R., Huong N., Crosky A., Mouritz A.P., Kelly D., Chang P. Improving bearing performance of composite bolted joints using z-pins. Compos Sci Technol 2009, 69:883-889.
12. Abibe A.B., Amancio-Filho S.T., Dos Santos J.F., Hage E. Development and analysis of a new joining method for polymer-metal hybrid structures. J Thermoplast Compos Mater 2011, 24:233-249.
13. Amancio S.T., dos Santos J.F., Beyer M. Method and device for connecting a plastic workpiece to a further workpiece 2010, GKSS-Forschungszentrum Geesthacht GmbH (Geesthacht, DE), United States.
14. Gonçalves E.S., Poulsen L., Ogilby P.R. Mechanism of the temperature-dependent degradation of polyamide 66 films exposed to water. Polym Degrad Stab 2007, 92:1977-1985.
15. Jia N., Fraenkel H.A., Kagan V.A. Effects of moisture conditioning methods on mechanical properties of injection molded nylon 6. J Reinf Plast Compos 2004, 23:729-737.
16. Kohan M.L. Moisture in nylon - selected topics. Annual technical conference of the society of plastics engineers 1998, 1676-1681. Society of Plastics Engineers, Atlanta, (USA).
17. Kulkarni S., Hart D. Effect of overdrying hygroscopic resins and a technological solution for its prevention. Annual Technical Conference of the Society of Plastics Engineers 2003, 736-740. Society of Plastics Engineers, Nashville, (USA).
18. Liu S.J., Chang I.T. Optimizing the weld strength of ultrasonically welded nylon composites. J Compos Mater 2002, 36:611-624.
19. Kagan V.A., Kocheny S.A., Macur J.E. Moisture effects on mechanical performance of laser-welded polyamide. J Reinf Plast Compos 2005, 24:1213-1223.
20. Khanna Y.P., Han P.K., Day E.D. New developments in the melt rheology of nylons. I: effect of moisture and molecular weight. Polym Eng Sci 1996, 36:1745-1754.
21. Brydson J.A. Polyamides and polyimides. Plastics mater 1999, 478-530. Butterworth-Heinemann, Oxford. 7th ed. J.A. Brydson (Ed.).
22. Abibe A.B. Desenvolvimento de união de multimateriais através de " Rebitagem por Injeção" (Injection Clinching Joining) 2011, Universidade Federal de São Carlos.
23. York J.L., Wilson D.W., Pipes R.B. Analysis of the net tension failure mode in composite bolted joints. J Reinf Plast Compos 1982, 1:141-152.
24. Amancio S.T. Friction riveting: development and analysis of a new joining technique for polymer-metal multi-material structures. Weld World 2011, 55:13-24.
25. Balakrishnan K.N., Kang H.T., Mallick P.K. Joining aluminum to nylon using frictional heat. SAE world congress 2007, SAE International, Detroit, (USA).
26. Oliveira P.H.F., Amancio S.T., dos Santos J.F., Hage E. Preliminary study on the feasibility of friction spot welding in PMMA. Mater Lett 2010, 64:2098-2101.
27. Schmidt S.R., Launsby R.G. Understanding industrial designed experiments 2005, Air Academy Press & Associates, Colorado Springs.
28. DIN DIN 53455. Prüfung von Kunststoffen, Zugversuch 1981, Deutsches Institut für Normung e.V., Hamburg.