3-Mercaptopropyltrimethoxysilane-modified multi-walled carbon nanotubes as a new functional adsorbent for flow injection extraction of Pb(II) from water and sediment samples

Water, Air, and Soil Pollution

Volumn 223, Issue 9, 2012, Pages 6069-6081

  Somera, Bruna Fabrin ^a   Corazza, Marcela Zanetti ^a   Yabe, Maria Josefa Santos ^a   Segatelli, Mariana Gava ^a   Galunin, Evgeny ^a   Tarley, César Ricardo Teixeira ^a,b  

^a STATE UNIVERSITY OF LONDRINA   (Brazil)

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

3 mercaptopropyltrimethoxysilane; Factorial design; Lead; Multi walled carbon nanotubes; Preconcentration

Indexed keywords

3-MERCAPTOPROPYLTRIMETHOXYSILANE; ADSORBENT MATERIALS; ADSORBENT SURFACES; ADSORPTION CAPACITIES; BUFFER SOLUTIONS; DETECTION AND QUANTIFICATION LIMIT; DOEHLERT MATRIX; FACTORIAL DESIGN; FLAME ATOMIC ABSORPTION SPECTROMETRY; FLOW INJECTION; LINEAR GRAPH; MICROSCOPIC TECHNIQUES; PRE-CONCENTRATION; REFERENCE MATERIAL; SAMPLE PH; SEDIMENT SAMPLES; SOLID-PHASE EXTRACTION; TRACE DETERMINATION; WATER SAMPLES;

ADSORPTION; ATOMIC ABSORPTION SPECTROMETRY; CHEMICAL MODIFICATION; ENERGY DISPERSIVE SPECTROSCOPY; FOURIER TRANSFORM INFRARED SPECTROSCOPY; LEAD; MULTIWALLED CARBON NANOTUBES (MWCN); SEDIMENTS; SUBMARINE GEOLOGY; TRACE ANALYSIS;

WATER INJECTION;

3 MERCAPTOPROPYLTRIMETHOXYSILANE; ADSORBENT; LEAD; MULTI WALLED NANOTUBE; UNCLASSIFIED DRUG;

ADSORPTION; AQUEOUS SOLUTION; ATOMIC ABSORPTION SPECTROSCOPY; CARBON; CHEMICAL COMPOSITION; DETECTION METHOD; FTIR SPECTROSCOPY; LEAD; NANOTECHNOLOGY; SCANNING ELECTRON MICROSCOPY; SEDIMENT ANALYSIS;

ACCURACY; ADSORPTION; AQUEOUS SOLUTION; ARTICLE; ATOMIC ABSORPTION SPECTROMETRY; CHEMICAL MODIFICATION; FLOW RATE; INFRARED SPECTROSCOPY; LIMIT OF DETECTION; LIMIT OF QUANTITATION; PH; SCANNING ELECTRON MICROSCOPY; SEDIMENT; SOLID PHASE EXTRACTION; WATER SAMPLING;

EID: 84870244611     PISSN: 00496979     EISSN: 15732932     Source Type: Journal    
DOI: 10.1007/s11270-012-1341-z     Document Type: Article

References (47)

1. Afzali, D., & Mostafavi, A. (2008). Potential of modified multiwalled carbon nanotubes with 1-(2-pyridylazo)-naphthol as a new solid sorbent for the preconcentration of trace amounts of cobalt(II) ion. Analytical Sciences, 24, 1135-1139.
2. Afzali, D., Jamshidi, R., Ghaseminezhad, S., & Afzali, Z. (2012). Preconcentration procedure trace amounts of palladium using multiwalled carbon nanotubes sorbent prior to flame atomic absorption spectrometry. Arabian Journal of Chemistry, 5, 461-466.
3. Aviles, F., Cauich-Rodriguez, J. V., Moo-Tah, L., May-Pat, A., & Vargas-Coronado, R. (2009). Evaluation of mild acid oxidation treatments for MWCNT functionalization. Carbon, 47, 2970-2975.
4. Barbosa, A. F., Segatelli, M. G., Pereira, A. C., Santos, A. S., Kubota, L. T., Luccas, P. O., et al. (2007). Solid-phase extraction system for Pb(II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic spectrometry. Talanta, 71, 1512-1519.
5. Buhani, Narsito, Nuryono, & Kunarti, E. S. (2010). Production of metal ion imprinted polymer from mercapto-silica through sol-gel process as selective adsorbent of cadmium. Desalination, 251, 83-89.
6. Cai, Y., Jiang, G., Liu, J., & Zhou, Q. (2003). Multiwalled carbon nanotubes as a solid-phase extraction adsorbent for the determination of bisphenol A, 4-nnonylphenol, and 4-tert-octylphenol. Analytical Chemistry, 75, 2517-2521.
7. Cheng, H., & Hu, Y. (2010). Lead (Pb) isotopic fingerprinting and its applications in lead pollution studies in China: a review. Environmental Pollution, 158, 1134-1146.
8. CONAMA - National Council for the Environment (2005) Resoluç ão CONAMA No 357. http://www.mma.gov.br/port/conama/legiabre.cfm? codlegi0459. Accessed 21 June 2012
9. Costa, H. H. V., Lima, G. F., Nacano, L. R., & Tarley, C. R. T. (2011). Preconcentration/cleanup studies of tin from environmental water samples by oxidized multiwall carbon nanotubes packed column and its determination by ETAAS. Water, Air, and Soil Pollution, 217, 557-565.
10. Cui, Y., Liu, S., Hu, Z. J., Liu, X. H., & Gao, H. W. (2011). Solid-phase extraction of lead(II) ions using multiwalled carbon nanotubes grafted with tris(2-aminoethyl)amine. Microchimica Acta, 174, 107-113.
11. De Oliveira, F. M., Somera, B. F., Corazza, M. Z., Yabe, M. J. S., Segatelli, M. G., Ribeiro, E. S., et al. (2011). Cellulose microfiber functionalized with N,N′-bis(2-aminoethyl)-1,2- ethanediamine as a solid sorbent for the fast preconcentration of Cd(II) in flow system analysis. Talanta, 85, 2417-2424.
12. Duran, A., Tuzen, M., & Soylak, M. (2009). Preconcentration of some trace elements via using multiwalled carbon nanotubes as solid phase extraction adsorbent. Journal of Hazardous Materials, 169, 466-471.
13. El-Sheikh, A. H. (2008). Effect of chemical treatment of multiwalled carbon nanotubes with various oxidizing agents on its preconcentration performance of some metals. Jordan Journal of Chemistry, 3, 293-304.
14. Ferrúa, N., Cerutti, S., Salonia, J. A., Olsina, R. A., & Martinez, L. D. (2007). On-line preconcentration and determination of mercury in biological and environmental samples by cold vapor-atomic absorption spectrometry. Journal of Hazardous Materials, 141, 693-699.
15. Gaspar, H., Pereira, C., Rebelo, S. L. H., Pereira, M. F. R., Figueiredo, J. L., & Freire, C. (2011). Understanding the silylation reaction of multi-walled carbon nanotubes. Carbon, 49, 3441-3453.
16. Hu, Z. J., Cui, Y., Yuan, Y., & Gao, H. W. (2011). Optimization of ethylenediamine-grafted multiwalled carbon nanotubes for solid-phase extraction of lead cations. Environmental Science Pollution Resource, 19, 1-8.
17. Karousis, N., Tagmatarchis, N., & Tasis, D. (2010). Current progress on the chemical modification of carbon nanotubes. Chemical Review, 110, 5366-5397.
18. Kathi, J., & Rhee, K. Y. (2008). Surface modification of multiwalled carbon nanotubes using 3-aminopropyltriethoxysilane. Journal of Material Science, 43, 33-37.
19. Kathi, J., Rhee, K. Y., & Lee, J. H. (2009). Effect of chemical functionalization of multi-walled carbon nanotubes with 3- aminopropyltriethoxysilane on mechanical and morphological properties of epoxy nanocomposites. Composites Part A: Applied Science and Manufacturing, 40, 800-809.
20. Korn, M. G. A., de Andrade, J. B., de Jesus, D. S., Lemos, V. A., Bandeira, M. L. S. F., dos Santos, W. N. L., et al. (2006). Separation and preconcentration procedures for the determination of lead using spectrometric techniques: a review. Talanta, 69, 16-24.
21. Li, R., Chang, X., Li, Z., Zang, Z., Hu, Z., Li, D., et al. (2011). Multiwalled carbon nanotubes modified with 2- aminobenzothiazole modified for uniquely selective solidphase extraction and determination of Pb(II) ion in water samples. Microchimica Acta, 172, 269-276.
22. Liu, Y., Liang, P., & Guo, L. (2005). Nanometer titanium dioxide immobilized on silica gel as sorbent for preconcentration of metal ions prior to their determination by inductively coupled plasma atomic emission spectrometry. Talanta, 68, 25-30.
23. Long, G. L., & Winefordner, J. D. (1983). Limit of detection. A closer look at the IUPAC definition. Analytical Chemistry, 55, 712-724.
24. Madrakian, T., Zolfigol, M. A., & Solgi, M. (2008). Solid-phase extraction method for preconcentration of trace amounts of some metal ions in environmental samples using silica gel modified by 2,4,6-trimorpholino-1,3,5- triazin. Journal of Hazardous Materials, 160, 468-472.
25. Montgomery, D. C. (2010). Design and analysis of experiments. New York: Wiley.
26. Nabid, M.R., Sedghi, R., Bagheri, A., Behbahani, M., Taghizadeh, M., Oskooie, H. A., Heravi, M. M., et al. (2012). Preparation and application of poly(2-amino thiophenol)/MWCNTs nanocomposite for adsorption and separation of cadmium and lead ions via solid phase extraction. Journal of Hazardous Materials, 203, 93-100.
27. Nacano, L. R., Segatelli, M. G., & Tarley, C. R. T. (2010). Selective sorbent enrichment of nickel ions from aqueous solutions using hierarchically hybrid organic-inorganic polymer based on double imprinting concept. Journal of the Brazilian Chemical Society, 21, 419-430.
28. Needleman, H. (2004). Lead poisoning. Annual Review of Medicine, 55, 209-222.
29. Ren, X., Shao, D., Zhao, G., Sheng, G., Hu, J., Yang, S., & Wang, X. (2011). Plasma induced multiwalled carbon nanotube grafted with 2-vinylpyridine for preconcentration of Pb(II) fromaqueous solutions. Plasma Process Polymer, 8, 589-598.
30. Sandroni, V., Smith, C. M. M., & Donovan, A. (2003). Microwave digestion of sediment, soils and urban particulate matter for trace metal analysis. Talanta, 60, 715-723.
31. Savio, M., Parodi, B., Martinez, L. D., Smichowski, P., & Gil, R. A. (2011). On-line solid-phase extraction of Ni and Pb using carbon nanotubes and modified carbon nanotubes coupled to ETAAS. Talanta, 85, 245-251.
32. Shamspur, T., & Mostafavi, A. (2009). Application of modified multiwalled carbon nanotubes as a sorbent for simultaneous separation and preconcentration trace amounts of Au(III) and Mn(II). Journal of Hazardous Materials, 168, 1548-1553.
33. Soylak, M., & Tuzen, M. (2006). Diaion SP-850 resin as a new solid phase extractor for preconcentration-separation of trace metal ions in environmental samples. Journal of Hazardous Materials, 137, 1496-1501.
34. Soylak, M., Elci, L., & Dogan, M. (1999). Flame atomic absorption spectrometric determination of cadmium, cobalt, copper, lead and nickel in chemical grade potassium salts after an enrichment and separation procedure. Journal of Trace and Microprobe Techniques, 17, 149-156.
35. Soylak, M., Karatepe, A. U., Elci, L., & Dogan, M. (2003). Column preconcentration/separation and atomic absorption spectrometric determinations of some heavy metals in table salt samples using Amberlite XAD-1180. Turkish Journal of Chemistry, 27, 235-242.
36. Tarley, C. R. T., dos Santos, W. N. L., dos Santos, C. M., Arruda, M. A. Z., & Ferreira, S. L. C. (2004). Factorial design and Doehlert matrix in optimization of flow system for preconcentration of copper on polyurethane foam loaded with 4-(2-pyridylazo)-resorcinol. Analytical Letters, 37, 1437-1455.
37. -1 levels using a simple flow injection microcolumn preconcentration system with multiwall carbon nanotubes. Journal of Analytical Atomic Spectrometry, 21, 1305-1313.
38. 3/Ni2O5) matrix obtained by the sol-gel processing method: new material for online extraction of zinc ions. Journal of the Brazilian Chemical Society, 21, 1106-1116.
39. Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006). Chemistry of carbon nanotubes. Chemical Review, 106, 1105-1136.
40. Tuzen, M., Saygi, K. O., & Soylak, M. (2008). Solid-phase extraction of heavy metal ions in environmental samples on multiwalled carbon nanotubes. Journal of Hazardous Materials, 152, 632-639.
41. Upadhyayula, V. K. K., Deng, S. G., Mitchell, M. C., & Smith, G. B. (2009). Application of carbon nanotube technology for removal of contaminants in drinking water: a review. Science of the Total Environment, 408, 1-13.
42. Velasco-Santos, C., Martínez-Hernández, A. L., Lozada-Cassou, M., Alvarez-Castillo, A., & Castaño, V. M. (2002). Chemical functionalization of carbon nanotubes through an organosilane. Nanotechnology, 13, 495-498.
43. Xie, F., Lin, X., Wu, X., & Xie, Z. (2008). Solid phase extraction of lead(II), copper(II), cadmium(II) and nickel (II) using gallic acid-modified silica gel prior to determination by flame atomic absorption spectrometry. Talanta, 74, 836-843.
44. 2 coated carbon nanotubes by using ETAAS. Desalination, 278, 65-69.
45. Zang, Z., Hu, Z., Li, Z., He, Q., & Chang, X. (2009). Synthesis, characterization and application of ethylenediaminemodified multiwalled carbon nanotubes for selective solid-phase extraction and preconcentration of metal ions. Journal of Hazardous Materials, 172, 958-963.
46. Zhan, X. M., & Zhao, X. (2003). Mechanism of lead adsorption from aqueous solutions using an adsorbent synthesized from natural condensed tannin. Water Research, 37, 3905-3912.
47. Zhou, Z., Wang, S., Lu, L., Zhang, Y., & Zhang, Y. (2008). Functionalization of multi-wall carbon nanotubes with silane and its reinforcement on polypropylene composites. Composites Science and Technology, 68, 1727-1733.