Poly (l-lactide acid) improves complete nano-hydroxyapatite bone scaffolds through the microstructure rearrangement

Electronic Journal of Biotechnology

Volumn 15, Issue 6, 2012, Pages

  Shuai, Cijun ^a   Nie, Yi ^a   Gao, Chengde ^a   Lu, Haibo ^a   Hu, Huanlong ^a   Wen, Xuejun ^b   Peng, Shuping ^a  

^a CENTRAL SOUTH UNIVERSITY   (China)

^b MEDICAL UNIVERSITY OF SOUTH CAROLINA   (United States)

Author keywords

Hardness; Microstructure; Nano hydroxyapatite; Thermal properties

Indexed keywords

ADVERSE EFFECT; BONE SCAFFOLDS; BONE TISSUE ENGINEERING; CAPILLARY FORCE; FTIR ANALYSIS; L-LACTIDE; LARGE PORES; LASER POWER; LASER SINTERING; LASER SPOTS; LAYER THICKNESS; MECHANICAL BLENDING; NANO-HYDROXYAPATITE; OPTIMUM PARAMETERS; PARTICLE REARRANGEMENT; PLLA; POWDER BED; SCANNING SPEED; SELECTIVE LASER SINTERING; SINTERING PROPERTIES; SINTERING ZONES; TETRACALCIUM PHOSPHATE; TRI-CALCIUM PHOSPHATES;

BLENDING; BONE; CRACKS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HARDNESS; LASER HEATING; LASERS; MICROSTRUCTURE; NANOCOMPOSITES; SCANNING ELECTRON MICROSCOPY; SINTERING; THERMODYNAMIC PROPERTIES; TISSUE ENGINEERING; X RAY DIFFRACTION;

SCAFFOLDS;

CALCIUM PHOSPHATE; HYDROXYAPATITE; NANOHYDROXYAPATITE; NANOMATERIAL; POLYLACTIDE; TETRACALCIUM PHOSPHATE; UNCLASSIFIED DRUG;

ARTICLE; DENSITY; HARDNESS; INFRARED SPECTROSCOPY; LASER; SCANNING ELECTRON MICROSCOPY; STRUCTURE ANALYSIS; TEMPERATURE; TEMPERATURE STRESS; THERMAL CONDUCTIVITY; X RAY DIFFRACTION;

EID: 84870026321     PISSN: None     EISSN: 07173458     Source Type: Journal    
DOI: 10.2225/vol15-issue6-fulltext-3     Document Type: Article

References (34)

1. BARRALET, J.E.; FLEMING, G.J.P.; CAMPION, C.; HARRIS, J.J. and WRIGHT, A.J. (2003). Formation of translucent hydroxyapatite ceramics by sintering in carbon dioxide atmospheres. Journal of Materials Science, vol. 38, no. 19, p. 3979-3993. [CrossRef]
2. BÖSTMAN, O. and PIHLAJAMÄKI, H. (2000). Clinical biocompatibility of biodegradable orthopaedic implants for internal fixation: A review. Biomaterials, vol. 21, no. 24, p. 2615-2621. [CrossRef]
3. BUTT, H.J. and KAPPL, M. (2009). Normal capillary forces. Advances in Colloid and Interface Science, vol. 146, no. 1-2, p. 48-60. [CrossRef]
4. CHEN, L.; YANG, J.; WANG, K.; CHEN, F. and FU, Q. (2010). Largely improved tensile extensibility of poly (L-lactic acid) by adding poly (ε-caprolactone). Polymer International, vol. 59, no. 8, p. 1154-1161. [CrossRef]
5. CRETU, A.; KUCKLING, D. and ADLER, H.-J. (2004). Hydrophilic-hydrophobic polymers based on poly (L-lactide) and poly (2-hydroxyethyl methacrylate). Materials Science Forum, vol. 455-456, p. 425-428. [CrossRef]
6. GU, D.; SHEN, Y. and WU, X. (2008). Formation of a novel W-rim/Cu-core structure during direct laser sintering of W-Cu composite system. Materials Letters, vol. 62, no. 12-13, p. 1765-1768. [CrossRef]
7. HEDIA, H.S. (2005). Design of functionally graded dental implant in the presence of cancellous bone. Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 75B, no. 1, p. 74-80. [CrossRef]
8. KAILASANATHAN, C. and SELVAKUMAR, N. (2012). Comparative study of hydroxyapatite/gelatin composites reinforced with bio-inert ceramic particles. Ceramics International, vol. 38, no. 5, p. 3569-3582. [CrossRef]
9. LEE, B.I.; YOO, J.H.; CHUN, D.I.; CHOI, H.S.; MIN, K.D. and JEEN, Y.M. (2010). Delayed foreign body reaction due to bioabsorbable pins used for femoral fixation in anterior cruciate ligament reconstruction: A case report. The American Journal of Sports Medicine, vol. 38, no. 1, p. 176-180. [CrossRef]
10. LI, J.F.; LI, L. and STOTT, F.H. (2004). Thermal stresses and their implication on cracking during laser melting of ceramic materials. Acta Materialia, vol. 52, no. 14, p. 4385-4398. [CrossRef]
11. LI, B. and YANG, M. (2006). Improvement of thermal and mechanical properties of poly (L-lactic acid) with 4,4-methylene diphenyl diisocyanate. Polymers for Advanced Technologies, vol. 17, no. 6, p. 439-443. [CrossRef]
12. LIU, Z.H.; NOLTE, J.J.; PACKARD, J.I.; HILMAS, G.; DOGAN, F. and LEU, M.C. (2007). Selective laser sintering of high-density alumina ceramic parts. In: Proceedings of the 35th International MATADOR Conference. (18th-20th July, 2007, Taipei Taiwan), vol. 14, p. 351-354. [CrossRef]
13. MATSUMOTO, M.; SHIOMI, M.; OSAKADA, K. and ABE, F. (2002). Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing. International Journal of Machine Tools and Manufacture, vol. 42, no. 1, p. 61-67. [CrossRef]
14. MURALITHRAN, G. and RAMESH, S. (2000). The effects of sintering temperature on the properties of hydroxyapatite. Ceramics International, vol. 26, no. 2, p. 221-230. [CrossRef]
15. NAKAGAWA, M.; TERAOKA, F.; FUJIMOTO, S.J.; HAMADA, Y.; KIBAYASHI, H. and TAKAHASHI, J. (2006). Improvement of cell adhesion on poly (L-lactide) by atmospheric plasma treatment. Journal of Biomedical Materials Research Part A, vol. 77A, no. 1, p. 112-118. [CrossRef]
16. RAMU, P.M. and YADAVA, V. (2008). Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method. International Journal of Manufacturing Technology and Management, vol. 13, no. 2-3-4, p. 280-296. [CrossRef]
17. SEINO, D.; FUKUNISHI, S. and YOSHIYA, S. (2007). Late foreign-body reaction to PLLA screws used for fixation of acetabular osteotomy. Journal of Orthopaedics and Traumatology, vol. 8, no. 4, p. 188-191. [CrossRef]
18. SHUAI, C.; GAO, C.; NIE, Y.; HU, H.; QU, H. and PENG, S. (2010). Structural design and experimental analysis of a selective laser sintering system with nano-hydroxyapatite powder. Journal of Biomedical Nanotechnology, vol. 6, no. 4, p. 370-374. [CrossRef]
19. SHUAI, C.; GAO, C.; NIE, Y.; HU, H.; ZHOU, Y. and PENG, S. (2011a). Structure and properties of nano-hydroxyapatite scaffolds for bone tissue engineering with a selective laser sintering system. Nanotechnology, vol. 22, no. 28, p. 285703-285712. [CrossRef]
20. SHUAI, C.; FENG, P.; GAO, C.; ZHOU, Y. and PENG, S. (2011b). Simulation of temperature field during the laser sintering process of nano-hydroxyapatite powder. Advanced Materials Research, vol. 314-316, p. 626-629. [CrossRef]
21. SOPYAN, I.; MEL, M.; RAMESH, S. and KHALID, K.A. (2007). Porous hydroxyapatite for artificial bone applications. Science and Technology of Advanced Materials, vol. 8, no. 1-2, p. 116-123. [CrossRef]
22. SUN, C.N. and GUPTA, M.C. (2008). Laser sintering of ZrB2. Journal of the American Ceramic Society, vol. 91, no. 5, p. 1729-1731. [CrossRef]
23. TAN, K.H.; CHUA, C.K.; LEONG, K.F.; CHEAH, C.M.; CHEANG, P.; ABU BAKAR, M.S. and CHA, S.W. (2003). Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. Biomaterials, vol. 24, no. 18, p. 3115-3123. [CrossRef]
24. VON RECUM, H.A.; CLEEK, R.L.; ESKIN, S.G. and MIKOS, A.G. (1995). Degradation of polydispersed poly(L-lactic acid) to modulate lactic acid release. Biomaterials, vol. 16, no. 6, p. 441-447. [CrossRef]
25. WAKAI, F. (2007). Interplay between surface and grain boundary in sintering. Materials Science Forum, vol. 558-559, p. 1029-1034. [CrossRef]
26. WALTON, M. and COTTON, N.J. (2007). Long-term in vivo degradation of Poly-L-lactide (PLLA) in bone. Journal of Biomaterials Applications, vol. 21, no. 4, p. 395-411. [CrossRef]
27. WEIR, N.A.; BUCHANAN, F.J.; ORR, J.F. and DICKSON, G.R. (2004). Degradation of poly-L-lactide. Part 1: In vitro and in vivo physiological temperature degradation. Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, vol. 218, no. 5, p. 307-319. [CrossRef]
28. WIRIA, F.E.; LEONG, K.F.; CHUA, C.K. and LIU, Y. (2007). Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering. Acta Biomaterialia, vol. 3, no. 1, p. 1-12. [CrossRef]
29. WIRIA, F.E.; CHUA, C.K.; LEONG, K.F.; QUAH, Z.Y.; CHANDRASEKARAN, M. and LEE, M.W. (2008). Improved biocomposite development of poly (vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering. Journal of Materials Science: Materials in Medicine, vol. 19, no. 3, p. 989-996. [CrossRef]
30. YANAGIDA, H.; OKADA, M.; MASUDA, M.; UEKI, M.; NARAMA, I.; KITAO, S.; KOYAMA, Y.; FURUZONO, T. and TAKAKUDA, K. (2009). Cell adhesion and tissue response to hydroxyapatite nanocrystal-coated poly (L-lactic acid) fabric. Journal of Bioscience and Bioengineering, vol. 108, no. 3, p. 235-243. [CrossRef]
31. YEN, H.C. (2012). A new slurry-based shaping process for fabricating ceramic green part by selective laser scanning the gelled layer. Journal of the European Ceramic Society, vol. 32, no. 12, p. 3123-3128. [CrossRef]
32. ZHANG, J.; LI, D.Y.; QIU, B. and ZHAO, L.Z. (2011). Simulation of temperature field in selective laser sintering on PA6/Cu composite powders. Advanced Materials Research, vol. 213, p. 519-523. [CrossRef]
33. ZHOU, W.; LEE, S.H.; WANG, M.; CHEUNG, W.L. and IP, W.Y. (2008). Selective laser sintering of porous tissue engineering scaffolds from poly(L-lactide)/carbonated hydroxyapatite nanocomposite microspheres. Journal of Materials Science: Materials in Medicine, vol. 19, no. 7, p. 2535-2540. [CrossRef]
34. ZHOU, H. and LEE, J. (2011). Nanoscale hydroxyapatite particles for bone tissue engineering. Acta Biomaterialia, vol. 7, no. 7, p. 2769-2781. [CrossRef]