Surface oxidation of cellulose by ozone-gas in a vacuum cylinder to improve the functionality of fluoromonomer

Vacuum

Volumn 91, Issue , 2013, Pages 7-13

  Gashti, Mazeyar Parvinzadeh ^a   Pournaserani, Alireza ^a   Ehsani, Hamed ^a   Gashti, Mahyar Parvinzadeh ^b  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Cotton; Ozone gas; Water repellency

Indexed keywords

CONTACT ANGLE; COTTON; GASES; GRAVIMETRIC ANALYSIS; OZONE; SCANNING ELECTRON MICROSCOPY; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

BENDING LENGTH; HIGHER EFFICIENCY; OZONE GAS; PRE-TREATMENT; SURFACE OXIDATIONS; WATER CONTACT ANGLE (WCA); WATER REPELLENCY; WATER REPELLENTS;

FOURIER TRANSFORM INFRARED SPECTROSCOPY;

CELLULOSE; COTTON; NATURAL FIBERS; OXIDATION; OZONE; SCANNING ELECTRON MICROSCOPY; SURFACE TREATMENT;

EID: 84869882108     PISSN: 0042207X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.vacuum.2012.10.015     Document Type: Article

References (75)

1. Parvinzadeh Gashti, M., Willoughby, J., Agrawal, P., Peter Hauser, J., (eds.) Surface and bulk modification of synthetic textiles to improve dyeability, textile dyeing, 2011, InTech 978-953-307-565-5 Available from: http://www.intechopen.com/articles/show/title/surface-and-bulk-modification-of-synthetictextiles-to-improve-dyeability.
2. Parvinzadeh, M., Surface modification of synthetic fibers to improve performance: recent approaches. Glob J Phys Chem, 3, 2012, 2.
3. El-tahlawy, K.F., El-bendary, M.A., Elhendawy, A.G., Hudson, S.M., The antimicrobial activity of cotton fabrics treated with different crosslinking agents and chitosan. Carbohyd Polym 60 (2005), 421–430.
4. Parvinzadeh, M., The effects of softeners on the properties of sulfur-dyed cotton fibers. J Surfact Deterg 10 (2007), 219–223.
5. Parvinzadeh, M., Najafi, H., Textile softeners on cotton dyed with direct dyes: reflectance and fastness assessments. Tenside Surf Det 45 (2008), 13–16.
6. Su, C., Li, J., The friction property of super-hydrophobic cotton textiles. Appl Surf Sci 256 (2010), 4220–4225.
7. Dargaville, T.R., George, G.A., Hill, D.J.T., Whittaker, A.K., High energy radiation grafting of fluoropolymers. Prog Polym Sci 28 (2003), 1355–1376.
8. Hansen, N.M.L., Jankova, K., Hvilsted, S., Fluoropolymer materials and architectures prepared by controlled radical polymerizations. Eur Polym J 43 (2007), 255–293.
9. Roy, D., Semsarilar, M., Guthrie, J.T., Perrier, S., Cellulose modification by polymer grafting: a review. Chem Soc Rev 38 (2009), 2046–2064.
10. Peng, S., Gao, Z., Sun, J., Yao, L., Qiu, Y., Influence of argon/oxygen atmospheric dielectric barrier discharge treatment on desizing and scouring of poly (vinyl alcohol) on cotton fabrics. Appl Surf Sci 255 (2009), 9458–9462.
11. Parvinzadeh, M., Ebrahimi, I., Atmospheric air-plasma treatment of polyester fiber to improve the performance of nanoemulsion silicone. Appl Surf Sci 257 (2011), 4062–4068.
12. Parvinzadeh, M., Ebrahimi, I., Influence of atmospheric-air plasma on the coating of a nonionic lubricating agent on polyester fiber. Radiat Eff Def Solids 166 (2011), 408–416.
13. Ebrahimi, I., Kiumarsi, A., Parvinzadeh Gashti, M., Rashidian, R., Hossein Norouzi, M., Atmospheric-air plasma enhances coating of different lubricating agents on polyester fiber. Europ Phys J Appl Phys, 56, 2011, 10801.
14. Hassan, M.S., Crease recovery properties of cotton fabrics modified by urea resins under the effect of gamma irradiation. Radiat Phys Chem 78 (2009), 333–337.
15. Alonso, D., Gimeno, M., Olayo, R., Vázquez-Torres, H., Sepúlveda-Sánchez, J.D., Shirai, K., Cross-linking chitosan into UV-irradiated cellulose fibers for the preparation of antimicrobial-finished textiles. Carbohyd Polym 77 (2009), 536–543.
16. Parvinzadeh, M., Ultrasonic assisted finishing of cotton with nonionic softener. Tenside Surf Det 46 (2009), 335–339.
17. Parvinzadeh, M., Memari, N., Shaver, M., Katozian, B., Ahmadi, S., Ziadi, I., Influence of ultrasonic waves on the processing of cotton with cationic softener. J Surfact Deterg 10 (2010), 219–223.
18. Fouda, M.M.G., El Shafei, A., Sharaf, S., Hebeish, A., Microwave curing for producing cotton fabrics with easy care and antibacterial properties. Carbohyd Polym 77 (2009), 651–655.
19. Luo, S., Van Ooij, W.J., Surface modification of textile fibers for improvement of adhesion to polymeric matrices: a review. J Adhes Sci Technol 16 (2002), 1715–1735.
20. Kobayashi, T., Arisawa, M., Ngoc, N.L., Trang, T.C., Myoubudani, H., Surface modification of polymer textiles by thermally dried ozone. J Adhes Sci Technol 25 (2011), 1849–1859.
21. Koo, G.H., Jang, J., Surface modification of poly(lactic acid) by UV/Ozone irradiation. Fiber Polym 9 (2008), 674–678.
22. Perincek, S., Bahtiyari, M.İ., Körlü A.E., Duran, K., Ozone treatment of Angora rabbit fiber. J Clean Prod 16 (2008), 1900–1906.
23. Osman, E.M., Michael, M.N., Gohar, H., The effect of both UV\Ozone and chitosan on natural fabrics. Int J Chem 2 (2010), 28–39.
24. Perincek, S., Bahtiyari, M.İ., Körlü A.E., Duran, K., Effect of ozone and ultrasound on the fiber properties of angora rabbit. J Appl Polym Sci 120 (2011), 3119–3125.
25. Eren, H.A., Anis, P., Surface trimer removal of polyester fibers by ozone treatment. Text Res J 79 (2009), 652–656.
26. Pezelj, E., Čunko, R., Influence of ozone as an air pollutant on polypropylene fiber properties. Tex Res J 70 (2000), 537–541.
27. Cataldo, F., On the action of ozone on gelatin. Int J Biol Macromol 41 (2007), 210–216.
28. Cataldo, F., Ursini, O., Angelin, G., Surface oxidation of rubber crumb with ozone. Polym Degrad Stabil 95 (2010), 803–810.
29. Palit, S., Ozone treatment as an effective advanced oxidation process for the degradation of textile-dye effluents. Int J Chem Anal Sci 3 (2012), 1293–1295.
30. Sargunamani, D., Selvakumar, N., Effects of ozone treatment on the properties of raw and degummed tassar silk fabrics. J Appl Polym Sci 104 (2007), 147–155.
31. Eren, H.A., Ozturk, D., The evaluation of ozonation as an environmentally friendly alternative for cotton preparation. Text Res J 81 (2011), 512–519.
32. Parvinzadeh Gashti, M., Alimohammadi, F., Shamei, A., Preparation of water-repellent cellulose fibers using a polycarboxylic acid/hydrophobic silica nanocomposite coating. Surf Coat Technol 206:201 (2012), 3208–3215.
33. Alimohammadi, F., Parvinzadeh Gashti, M., Shamei, A., A novel method for coating of carbon nanotube on cellulose fiber using 1,2,3,4-butanetetracarboxylic acid as a cross-linking agent. Prog Org Coat 74 (2012), 470–478.
34. McCord, M.G., Hwang, Y.J., Qiu, Y., Hughes, L.K., Bourham, M.A., Surface analysis of cotton fabrics fluorinated in radio-frequency plasma. J Appl Polym Sci 88 (2003), 2038–2047.
35. Černe, L., Simončič B., Željko, M., The influence of repellent coatings on surface free energy of glass plate and cotton fabric. Appl Surf Sci 254 (2008), 6467–6477.
36. Davis, R., El-Shafei, A., Hauser, P., Use of atmospheric pressure plasma to confer durable water repellent functionality and antimicrobial functionality on cotton/polyester blend. Surf Coat Technol 205 (2011), 4791–4797.
37. Ferrero, F., Periolatto, M., Udrescu, C., Water and oil-repellent coatings of perfluoro-polyacrylate resins on cotton fibers: UV curing in comparison with thermal polymerization. Fiber Polym 13 (2012), 191–198.
38. Thorsen, W.J., Ward, W.H., Millard, M.M., Wool shrinkage control and surface modification by ozone. J Appl Polym Sci 24 (1979), 523–546.
39. Shao, J., Hawkyard, C.J., Carr, C.M., Investigation into the effect of UV/ozone treatments on the dyeability and printability of wool. J Soc Dye Colour 113 (1997), 126–130.
40. El-Zaher, N.A., Micheal, M.N., Time optimization of ultraviolet–ozone pretreatment for improving wool fabrics properties. J Appl Polym Sci 85 (2002), 1469–1476.
41. Micheal, M.N., El-Zaher, N.A., Efficiency of ultraviolet/ozone treatments in the improvement of the dyeability and light fastness of wool. J Appl Polym Sci 90 (2003), 3668–3675.
42. Wan, A., Yu, W., Effect of wool fiber modified by ecologically acceptable ozone-assisted treatment on the pilling of knit fabrics. Tex Res J 82 (2011), 27–36.
43. Adebajo, M.O., Frost, R.L., Kloprogge, J.T., Kokot, S., Raman spectroscopic investigation of acetylation of raw cotton. Spectrochim Acta Part A 64 (2006), 448–453.
44. Lee, M., Lee, M.S., Wakida, T., Tokuyama, T., Inoue, G., Ishida, S., et al. Chemical modification of nylon 6 and polyester fabrics by ozone-gas treatment. J Appl Polym Sci 100 (2006), 1344–1348.
45. Lee, M.S., Lee, M., Wakida, T., Saito, M., Yamashiro, T., Nishi, K., et al. Ozone-gas treatment of cationic dyeable polyester and poly(butylene terephthalate) fibers. J Appl Polym Sci 104 (2007), 2423–2429.
46. 3 irradiation. Dyes Pigm 69 (2006), 137–143.
47. Xie, K., Hou, A., Shi, Y., Yu, J., The surface polymerising of fluoromonomer and the shade-darkening effect on dyed polyester microfibre fabric. Color Technol 123 (2007), 293–297.
48. Fattahi, F., Izadan, H., Khoddami, A., Investigation into the effect of UV/ozone irradiation on dyeing behavior of poly(lactic acid) and poly(ethylene terephthalate) substrates. Prog Color, Colorants Coat 5 (2012), 15–22.
49. Dufour, F., Jordan, C., Viallier, P., Wash fastness of fluorocarbon finishes on polyester fabrics. J Soc Dye Colour 114 (1998), 258–263.
50. Guo, J., Resnick, P., Efimenko, K., Genzer, J., DeSimone, J.M., Alternative fluoropolymers to avoid the challenges associated with perfluorooctanoic acid. Ind Eng Chem Res 47 (2008), 502–508.
51. Tang, W., Huang, Y., Qing, F.L., Synthesis and characterization of fluorinated polyacrylate graft copolymers capable as water and oil repellent finishing agents. J Appl Polym Sci 119 (2011), 84–92.
52. 2 hybrid materials, part 1: preparation and properties of hybrid materials. J Appl Polym Sci 103 (2007), 1140–1145.
53. Rahimi, M.H., Parvinzadeh, M., Navid, M.Y., Ahmadi, S., Thermal characterization and flammability of polyester fiber coated with nonionic and cationic softeners. J Surfact Deterg 14 (2011), 595–603.
54. Parvinzadeh Gashti, M., Navid, M.Y., Rahimi, M.H., Coating of macroemulsion and microemulsion silicones on poly(ethylene terephthalate) fibers: evaluation of the thermal properties and flammability. J Appl Polym Sci 125 (2012), 1430–1438.
55. Abidi, N., Cabrales, L., Hequet, E., Thermogravimetric analysis of developing cotton fibers. Thermochim Acta 498 (2010), 27–32.
56. Parvinzadeh, M., A new approach to improve dyeability of nylon 6 fibre using a subtilisin enzyme. Coloration Technol 125 (2009), 228–233.
57. Parvinzadeh, M., Assefipour, R., Kiumarsi, A., Biohydrolysis of nylon 6,6 fiber with different proteolytic enzymes. Polym Degrad Stabil 94 (2009), 1197–1205.
58. Hajiraissi, R., Parvinzadeh, M., Preparation of polybutylene terephthalate/silica nanocomposites by melt compounding: evaluation of surface properties. Appl Surf Sci 257 (2011), 8443–8450.
59. Parvinzadeh, M., Eslami, S., Optical and electromagnetic characteristics of clay-iron oxide nanocomposites. Res Chem Interm 37 (2011), 771–784.
60. Mazrouei-Sebdani, Z., Khoddami, A., Mallakpour, S., Improvement in hydrophobicity of polyester fabric finished with fluorochemicals via aminolysis and comparing with nano-silica particles. Colloid Polym Sci 289 (2011), 1035–1044.
61. Dong, Y., Jang, J., The enhanced cationic dyeability of ultraviolet/ozone-treated meta-aramid fabrics. Color Tech 127 (2011), 173–178.
62. Bhurke, A.S., Askeland, P.A., Drzal, L.T., Surface modification of polycarbonate by ultraviolet radiation and ozone. J Adhes 83 (2007), 43–66.
63. Kim, E.M., Jang, J., Surface modification of meta-aramid films by UV/ozone irradiation. Fiber Polym 11 (2010), 677–682.
64. Yilgor, E., Kaymakci, O., Isik, M., Bilgin, S., Yilgor, I., Effect of UV/ozone irradiation on the surface properties of electrospun webs and films prepared from polydimethylsiloxane-urea copolymers. Appl Surf Sci 258 (2012), 4246–4253.
65. Parvinzadeh, M., Moradian, S., Rashidi, A., Yazdanshenas, M.E., Surface characterization of polyethylene terephthalate/silica nanocomposites. Appl Surf Sci 256 (2010), 2792–2802.
66. Parvinzadeh, M., Moradian, S., Rashidi, A., Yazdanshenas, M.E., Effect of addition of modified nanoclays on surface properties of the resultant polyethylene terephthalate/clay nanocomposites. Polym-plast Technol Eng 49 (2010), 1–11.
67. Parvinzadeh Gashti, M., Moradian, S., Effect of nanoclay type on dyeability of polyethylene terephthalate/clay nanocomposites. J Appl Polym Sci 125 (2012), 4109–4120.
68. Parvinzadeh, M., Hajiraissi, R., Macro- and microemulsion silicone softeners on polyester fibers: evaluation of different physical properties. J Surfact Deterg 11 (2008), 269–273.
69. 2/citric acid as inorganic/organic hybrid coating. Sensor Actuat A-Phys 187 (2012), 1–9.
70. Alimohammadi, F., Parvinzadeh Gashti, M., Shamei, A., Kiumarsi, A., Deposition of silver nanoparticles on carbon nanotube by chemical reduction method: evaluation of surface, thermal and optical properties. Superlattice Microst. 52 (2012), 50–62.
71. Naveau, E., Detrembleur, C., Jerome, C., Alexandre, M., Patenting activity in manufacturing organoclays for nanocomposite applications. Recent Pat Mater Sci 2 (2009), 43–49.
72. Fu, G., Liu, H., Gong, W., Study on preparation of composite materials of montmorillonite. IJMSCI 1 (2011), 18–22.
73. Parvinzadeh Gashti, M., Eslami, S., Structural, optical and electromagnetic properties of aluminum–clay nanocomposites. Superlattice Microst 51 (2012), 135–148.
74. Eren, H.A., Avinc, O., Uysal, P., Wilding, M., The effects of ozone treatment on polylactic acid (PLA) fibres. Text Res J 81 (2011), 1091–1099.
75. Parvinzadeh, M., Hajiraissi, R., Effect of nano and microemulsion silicone softeners on properties of polyester fibers. Tenside Surf Det 45 (2008), 254–257.