Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber-matrix for composite materials

Composites Part B: Engineering

Volumn 45, Issue 1, 2013, Pages 565-572

  Bozaci, Ebru ^a   Sever, Kutlay ^b   Sarikanat, Mehmet ^a   Seki, Yoldas ^c   Demir, Asli ^a   Ozdogan, Esen ^a   Tavman, Ismail ^c  

^a EGE UNIVERSITY   (Turkey)

^b IZMIR KATIP CELEBI UNIVERSITY   (Turkey)

^c DOKUZ EYLUL UNIVERSITY   (Turkey)

Author keywords

A. Fabrics textiles; B. Adhesion; B. Mechanical properties; B. Surface properties

Indexed keywords

AIR TREATMENT; ARGON PLASMAS; ATMOSPHERIC PLASMA TREATMENTS; ATMOSPHERIC PRESSURE PLASMAS; FABRICS/TEXTILES; FLAX FIBER; INTERFACIAL ADHESIONS; OXYGEN CONCENTRATIONS; PLASMA POWER; PLASMA TREATMENT; POLYESTER MATRIX; PULL-OUT TEST; SURFACE CHARACTERISTICS; SURFACE CHEMICAL COMPOSITION; UNSATURATED POLYESTER;

ADHESION; ESTERS; FLAX; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FUNCTIONAL GROUPS; INTERFACES (MATERIALS); LINEN; MECHANICAL PROPERTIES; PHOTOELECTRONS; PLASMA DIAGNOSTICS; PLASMAS; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS; X RAY PHOTOELECTRON SPECTROSCOPY; YARN;

FIBERS;

EID: 84869501624     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2012.09.042     Document Type: Article

References (56)

1. E. Bozaci, K. Sever, A. Demir, Y. Seki, M. Sarikanat, and E. Ozdogan Effect of the atmospheric plasma treatment parameters on surface and mechanical properties of jute fabric Fiber Polym 10 6 2009 781 786
2. Y. Seki, M. Sarikanat, K. Sever, S. Erden, and H.A. Gulec Effect of the low and radio frequency oxygen plasma treatment of jute fiber on mechanical properties of jute fiber/polyester composite Fiber Polym 11 8 2010 1159 1164
3. G. Bogoeva-Gaceva, M. Avella, M. Malinconico, A. Buzarovska, A. Grozdanov, and G. Gentile Natural fiber eco-composites Polym Compos 28 1 2007 98 107
4. D.N. Saheb, and J.P. Jog Natural fiber polymer composites: a review Adv Polym Technol 18 4 1999 351 363
5. F. Corrales, F. Vilaseca, M. Llop, J. Girones, J.A. Mendez, and P. Mutje Chemical modification of jute fibers for the production of green-composites J Hazard Mater 144 3 2007 730 735
6. J. George, M.S. Sreekala, and S. Thomas A review on interface modification and characterization of natural fiber reinforced plastic composites Polym Eng Sci 41 9 2001 1471 1485
7. A. Valadez-Gonzalez, J.M. Cervantes-Uc, R. Olayo, and P.J. Herrera-Franco Chemical modification of henequen fibers with an organosilane coupling agent Compos Part B - Eng 30 3 1999 321 331
8. D. Gulati, and M. Sain Surface characteristics of untreated and modified hemp fibers Polym Eng Sci 46 3 2006 269 273
9. X. Li, L.G. Tabil, and S. Panigrahi Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review J Polym Environ 15 1 2007 25 33
10. K. Sever, M. Sarikanat, Y. Seki, G. Erkan, U.H. Erdogan, and S. Erden Surface treatments of jute fabric: the influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites Indian Crop Prod 35 1 2012 22 30
11. L.A. Pothan, S. Thomas, and G. Groeninckx The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites Compos Part A - Appl Sci 37 9 2006 1260 1269
12. K. Sever, M. Sarikanat, Y. Sekai, G. Erkan, and U.H. Erdogan The mechanical properties of gamma-methacryloxypropyltrimethoxy silane-treated jute/polyester composites J Compos Mater 44 15 2010 1913 1924
13. M.Z. Rong, M.Q. Zhang, Y. Liu, G.C. Yang, and H.M. Zeng The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites Compos Sci Technol 61 10 2001 1437 1447
14. C.A.S. Hill, H.P.S.A. Khalil, and M.D. Hale A study of the potential of acetylation to improve the properties of plant fibres Indian Crop Prod 8 1 1998 53 63
15. K. Sever, S. Erden, H.A. Gulec, Y. Seki, and M. Sarikanat Oxygen plasma treatments of jute fibers in improving the mechanical properties of jute/HDPE composites Mater Chem Phys 129 1-2 2011 275 280
16. X.W. Yuan, K. Jayaraman, and D. Bhattacharyya Effects of plasma treatment in enhancing the performance of woodfibre-polypropylene composites Compos Part A - Appl Sci 35 12 2004 1363 1374
17. X.W. Yuan, K. Jayaraman, and D. Bhattacharyya Mechanical properties of plasma-treated sisal fibre-reinforced polypropylene composites J Adhes Sci Technol 18 9 2004 1027 1045
18. X.W. Yuan, K. Jayaraman, and D. Bhattacharyya Plasma treatment of sisal fibres and its effects on tensile strength and interfacial bonding J Adhes Sci Technol 16 6 2002 703 727
19. M.N. Belgacem, P. Bataille, and S. Sapieha Effect of corona modification on the mechanical-properties of polypropylene cellulose composites J Appl Polym Sci 53 4 1994 379 385
20. S.W. Kim, S. Oh, and K. Lee Variation of mechanical and thermal properties of the thermoplastics reinforced with natural fibers by electron beam processing Radiat Phys Chem 76 11-12 2007 1711 1714
21. R.Z. Li, L. Ye, and Y.W. Mai Application of plasma technologies in fibre-reinforced polymer composites: a review of recent developments Compos Part A - Appl Sci 28 1 1997 73 86
22. R. Shishoo Plasma technologies for textiles 2007 Woodhead Publishing Limited Cambridge
23. R. Morent, N. De Geyter, J. Verschuren, K. De Clerck, P. Kiekens, and C. Leys Non-thermal plasma treatment of textiles Surf Coat Technol 202 14 2008 3427 3449
24. S. Mukhopadhyay, and R. Fangueiro Physical modification of natural fibers and thermoplastic films for composites - a review J Thermoplast Compos 22 2 2009 135 162
25. S. Marais, F. Gouanve, A. Bonnesoeur, J. Grenet, F. Poncin-Epaillard, and C. Morvan Unsaturated polyester composites reinforced with flax fibers: effect of cold plasma and autoclave treatments on mechanical and permeation properties Compos Part A - Appl Sci 36 7 2005 975 986
26. F. Ferrero Wettability measurements on plasma treated synthetic fabrics by capillary rise method Polym Test 22 5 2003 571 578
27. P.P. Tsai, L.C. Wadsworth, and J.R. Roth Surface modification of fabrics using a one-atmosphere glow discharge plasma to improve fabric wettability Text Res J 67 5 1997 359 369
28. J. Verschuren, P. Van Herzele, K. De Clerck, and P. Kiekens Influence of fiber surface purity on wicking properties of needle-punched nonwoven after oxygen plasma treatment Text Res J 75 5 2005 437 441
29. K.K. Wong, X.M. Tao, C.W.M. Yuen, and K.W. Yeung Wicking properties of linen treated with low temperature plasma Text Res J 71 1 2001 49 56
30. P. Masse, J.P. Cavrot, P. Francois, J.M. Lefebvre, and B. Escaig Adhesion improvement of high-modulus polyethylene fibers by surface plasma treatment - evaluation by pull-out testing Polym Compos 15 3 1994 247 251
31. K.H. DA Kale Atmospheric pressure plasma treatment of textiles using non-polymerizing gases Indian J Fibre Text Res 36 2011 289 299
32. T. Öktem, N. Seventekin, A. Ayhan, and E. Pişkin Modification of polyester and polyamide fabrics by different in situ plasma polymerization methods Turk J Chem 24 2000 275 285
33. C. Kocum, and H. Ayhan Design and construction of uniform glow discharge plasma system operating under atmospheric condition Rev Sci Instrum 78 6 2007
34. Textiles-tensile properties of fabrics-Part I: determination of maximum force and elongation at maximum force using the strip method; 1999.
35. M. Lima, L. Hes, R. Vasconcelos, J. Martins, and Q. Frictor Accessing fabric friction with a novel fabric surface tester Autex Res J 5 4 2005 194 201
36. A.I.S. Brigida, V.M.A. Calado, L.R.B. Goncalves, and M.A.Z. Coelho Effect of chemical treatments on properties of green coconut fiber Carbohyd Polym 79 4 2010 832 838
37. M.A.S. Spinace, C.S. Lambert, K.K.G. Fermoselli, and M.A. De Paoli Characterization of lignocellulosic curaua fibres Carbohyd Polym 77 1 2009 47 53
38. V. Fiore, A. Valenza, and G. Di Bella Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures Compos Sci Technol 71 8 2011 1138 1144
39. I.M. De Rosa, J.M. Kenny, M. Maniruzzaman, M. Moniruzzaman, M. Monti, and D. Puglia Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus esculentus) fibres Compos Sci Technol 71 2 2011 246 254
40. N. Sgriccia, M.C. Hawley, and M. Misra Characterization of natural fiber surfaces and natural fiber composites Compos Part A - Appl Sci 39 10 2008 1632 1637
41. J. Biagiotti, D. Puglia, L. Torre, and J.M. Kenny A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites Polym Compos 25 5 2004 470 479
42. W. Liu, A.K. Mohanty, L.T. Drzal, P. Askel, and M. Misra Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites J Mater Sci 39 3 2004 1051 1054
43. V. Tserki, N.E. Zafeiropoulos, F. Simon, and C. Panayiotou A study of the effect of acetylation and propionylation surface treatments on natural fibres Compos Part A - Appl Sci 36 8 2005 1110 1118
44. N.E. Zafeiropoulos Engineering and characterisation of the interface in flax/polypropylene composite materials 2001 University of London London
45. M.M. Morshed, M.M. Alam, and S.M. Daniels Plasma treatment of natural jute fibre by RIE 80 plus plasma tool Plasma Sci Technol 12 3 2010 325 329
46. G. Socrates Infrared and raman characteristic group frequencies 2001 Wiley West Sussex, England
47. I.M. De Rosa, J.M. Kenny, D. Puglia, C. Santulli, and F. Sarasini Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites Compos Sci Technol 70 1 2010 116 122
48. E. Sinha Effect of cold plasma treatment on macromolecular structure, thermal and mechanical behavior of jute fiber J Ind Text 38 4 2009 317 339
49. K.H. Kale, and A.N. Desai Atmospheric pressure plasma treatment of textiles using non-polymerising gases Indian J Fibre Text 36 3 2011 289 299
50. S. Fakirov, and D. Bhattacharyya Handbook of engineering biopolymers: homopolymers, blends and composites 2007 Carl Hanser Verlag Munich
51. F. Denes, and R.A. Young Polysaccharides-structural diversity and functional versatility 1998 Marcel Dekker New York
52. A. Demir, Y. Seki, E. Bozaci, M. Sarikanat, S. Erden, and K. Sever Effect of the atmospheric plasma treatment parameters on jute fabric: the effect on mechanical properties of jute fabric/polyester composites J Appl Polym Sci 121 2 2011 634 638
53. C. Dellavolpe, L. Fambri, R. Fenner, C. Migliaresi, and A. Pegoretti Air-plasma treated polyethylene fibers - effect of time and temperature aging on fiber surface-properties and on fiber-matrix adhesion J Mater Sci 29 15 1994 3919 3925
54. S.I. Moon, and J. Jang Factors affecting the interfacial adhesion of ultrahigh-modulus polyethylene fibre vinylester composites using gas plasma treatment J Mater Sci 33 13 1998 3419 3425
55. D.J. Bettge, and G. Hinrichsen Continuous manufacturing of composites of high-performance polyethylene fibers Compos Sci Technol 47 2 1993 131 136
56. Zhang N, van Ooij WJ, Luo SJ. Structural investigation of plasma-polymerized pyrrole films. In: Antec '99: plastics bridging the millennia, conference proceedings, vols. I-Iii; 1999. p. 2495-501.