Effect of the spinning deformation processing on mechanical properties of Al-7Si-0.3Mg alloys

Journal of Materials Engineering and Performance

Volumn 21, Issue 9, 2012, Pages 1873-1878

  Cheng, Yin Chun ^a   Lin, Chih Kuang ^a   Tan, An Hung ^b   Hsu, Shih Yuan ^a   Lee, Sheng Long ^a  

^a NATIONAL CENTRAL UNIVERSITY   (Taiwan)

^b CHING YUN UNIVERSITY   (Taiwan)

Author keywords

Aluminum; Elongation; Spinning

Indexed keywords

A356 ALLOYS; CAST STRUCTURES; CASTING DEFECT; DEFORMATION PROCESSING; EUTECTIC SILICON; QUALITY INDICES; RE-ARRANGEMENT;

ALLOYS; CERIUM ALLOYS; ELONGATION; EUTECTICS; MECHANICAL PROPERTIES; METAL SPINNING; SILICON; TENSILE STRENGTH;

ALUMINUM;

EID: 84869494986     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11665-011-0089-8     Document Type: Article

References (16)

1. D. Carney, Wheel Design and Engineering, Autom. Eng. Int., 2001, 109, p 54-59
2. M. Merlin, G. Timelli, F. Bonollo, and G.L. Garagnani, Impact Behaviour of A356 Alloy for Low-pressure Die Casting Automotive Wheels, J. Mater. Process. Technol., 2009, 209, p 1060-1073
3. C.C. Wong, T.A. Dean, and J. Lin, A Review of Spinning, Shear Forming and Flow Forming Processes, Int. J. Mach. Tools Manuf., 2003, 43, p 1419-1435
4. D. Polit, Metal Spinning in the Automotive Industry, Sheet Met. Ind., 1995, 72, p 31-32
5. Y.C. Cheng, C.K. Lin, A.H. Tan, J.C. Lin, and S.L. Lee, Effect of Spinning Deformation Processing on the Wear and Corrosion Properties of Al-7Si-0.3Mg Alloys, Mater. Manuf. Process., 2010, 25, p 689-695
6. O. Music, J.M. Allwood, and K. Kawai, A Review of the Mechanics of Metal Spinning, J. Mater. Process. Technol., 2010, 210, p 3-23
7. A.M.A. Mohamed, A.M. Samuel, F.H. Samuel, and H.W. Doty, Influence of Additives on the Microstructure and Tensile Properties of Near-Eutectic Al-10.8%Si Cast Alloy, Mater. Des., 2009, 30, p 3943-3957
8. Y.C. Tsai, C.Y. Chou, S.L. Lee, C.K. Lin, J.C. Lin, and S.W. Lim, Effect of Trace La Addition on the Microstructures and Mechanical Properties of A356 (Al-7Si-0.35Mg) Aluminum Alloys, J. Alloys Compd., 2009, 487, p 157-162
9. Z. Ma, E. Samuel, A.M.A. Mohamed, A.M. Samuel, F.H. Samuel, and H.W. Doty, Influence of Aging Treatments and Alloying Additives on the Hardness of Al-11Si-2.5Cu-Mg Alloys, Mater. Des., 2010, 31, p 3791-3803
10. C.Y. Chou, K.W. Wang, S.L. Lee, and T.S. Yang, Modifying Al-7Si-0.35Mg Alloys Using Equal Channel Angular Extrusion, Mater. Lett., 2008, 62, p 2469-2472
11. M.J. Roy, R.J. Klassen, and J.T. Wood, Evolution of Plastic Strain During a Flow Forming Process, J. Mater. Process. Technol., 2009, 209, p 1018-1025
12. D.L. Zhang and L. Zheng, The Quench Sensitivity of Cast Al-7 Wt Pct Si-0.4 Wt Pct Mg Alloy, Metall. Mater. Trans. A, 1996, 27A, p 3983-3991
13. C.Y. Yang, S.L. Lee, C.K. Lee, and J.C. Lin, Effect of Sr and Sb Modifiers on the Sliding Wear of A357 Alloy Under Varying Pressure and Speed Conditions, Wear, 2006, 261, p 1348-1358
14. F.T. Lee, J.F. Major, and F.H. Samuel, Effect of Silicon Particles on the Fatigue Crack Growth Characteristics of Al-12 wt pct Si-0.35 wt pct Mg-(0 to 0.02) wt pct Sr Casting Alloys, Metall. Mater. Trans. A, 1995, 26, p 1553-1570
15. M.L. Santella, T. Engstron, D. Storjohann, and T.Y. Pan, Effect of Friction Stir Processing on Mechanical Properties of the Cast Aluminum Alloys A319 and A356, Scripta Mater., 2005, 53, p 201-206
16. M. Drouzy, S. Jacob, and M. Richard, Le Diagramme Charge de Rupture des Alliages d'aluminium, Foundries, 1976, 355, p 139-147