A survey of long-term health modeling, estimation, and control of Lithium-ion batteries: Challenges and opportunities

Proceedings of the American Control Conference

Volumn , Issue , 2012, Pages 584-591

  Hatzell, Kelsey B ^a   Sharma, Aabhas ^a   Fathy, Hosam K ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BATTERY MANAGEMENT SYSTEMS; DEGRADATION; PROCESS CONTROL;

BATTERY DEGRADATION; BATTERY MODELING; CONTROL STRATEGIES; DEGRADATION PROCESS; EXPERIMENTAL CHARACTERIZATION; FUNDAMENTAL MODELS; MODEL-BASED OPC; TIGHT INTEGRATIONS;

LITHIUM-ION BATTERIES;

EID: 84869402533     PISSN: 07431619     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/acc.2012.6315578     Document Type: Conference Paper

References (94)

1. J. Tarascon and M. Armand, "Issues and challenges facing rechargeable lithium batteries," Nature, vol. 414, no. 6861, pp. 359-367, 2001.
2. M. Armand and J. Tarascon, "Building better batteries," Nature, vol. 451, no. 7179, pp. 652-657, 2008.
3. N. Chaturvedi, R. Klein, J. Christensen, J. Ahmed, and A. Kojic, "Algorithms for advanced battery-management systems," Control Systems Magazine, IEEE, vol. 30, no. 3, pp. 49-68, 2010.
4. G. Sarre, P. Blanchard, and M. Broussely, "Aging of lithium-ion batteries," Journal of power sources, vol. 127, no. 1-2, pp. 65-71, 2004.
5. E. Wood, M. Alexander, and T. Bradley, "Investigation of battery end-of-life conditions for plug-in hybrid electric vehicles," Journal of Power Sources, 2011.
6. J. Vetter, P. Novak, M. Wagner, C. Veit, K. Moller, J. Besenhard, M. Winter, M. Wohlfahrt-Mehrens, C. Vogler, and A. Hammouche, "Ageing mechanisms in lithium-ion batteries," Journal of power sources, vol. 147, no. 1-2, pp. 269-281, 2005.
7. R. Spotnitz, "Simulation of capacity fade in lithium-ion batteries," Journal of power sources, vol. 113, no. 1, pp. 72-80, 2003.
8. K. Amine, C. Chen, J. Liu, M. Hammond, A. Jansen, D. Dees, I. Bloom, D. Vissers, and G. Henriksen, "Factors responsible for impedance rise in high power lithium ion batteries," Journal of power sources, vol. 97, pp. 684-687, 2001.
9. P. Verma, P. Maire, and P. Novák, "A review of the features and analyses of the solid electrolyte interphase in li-ion batteries," Electrochimica Acta, vol. 55, no. 22, pp. 6332-6341, 2010.
10. W. McKinnon and R. Haering, "Modern aspects in electrochemistry, vol. 15," 1987.
11. T. Tatsuma, M. Taguchi, and N. Oyama, "Inhibition effect of covalently cross-linked gel electrolytes on lithium dendrite formation," Electrochimica acta, vol. 46, no. 8, pp. 1201-1205, 2001.
12. M. Ecker, S. Kábitz, J. Gerschler, and D. Sauer, "Modeling of lithium plating in lithium-ion batteries." ECS, 2010.
13. P. Arora, R. White, and M. Doyle, "Capacity fade mechanisms and side reactions in lithium-ion batteries," Journal of the Electrochemical Society, vol. 145, p. 3647, 1998.
14. E. Peled, D. Golodnitsky, A. Ulus, and V. Yufit, "Effect of carbon substrate on sei composition and morphology," Electrochimica acta, vol. 50, no. 2-3, pp. 391-395, 2004.
15. E. Peled and D. Golodnitsky, "SEI on lithium, graphite, disordered carbons and tin-based alloys," Lithium-ion batteries: solid-electrolyte interphase, p. 1, 2004.
16. K. Tasaki, A. Goldberg, J. Lian, M. Walker, A. Timmons, and S. Harris, "Solubility of lithium salts formed on the lithium-ion battery negative electrode surface in organic solvents," Journal of The Electrochemical Society, vol. 156, p. A1019, 2009.
17. P. Ramadass, B. Haran, P. Gomadam, R. White, and B. Popov, "Development of first principles capacity fade model for li-ion cells," Journal of the Electrochemical Society, vol. 151, p. A196, 2004.
18. R. Darling and J. Newman, "Modeling side reactions in composite limno electrodes," Journal of The Electrochemical Society, vol. 145, p. 990, 1998.
19. P. Ramadass, B. Haran, R. White, and B. Popov, "Mathematical modeling of the capacity fade of li-ion cells," Journal of power sources, vol. 123, no. 2, pp. 230-240, 2003.
20. M. Safari, M. Morcrette, A. Teyssot, and C. Delacourt, "Multimodal physics-based aging model for life prediction of li-ion batteries," Journal of the Electrochemical Society, vol. 156, p. A145, 2009.
21. D. Bedrov, G. Smith, and A. Van Duin, "A quantum chemistry and reactive (reaxff) molecular dynamics simulations study of mechanisms of sei formation in lithium-ion batteries." ECS, 2010.
22. D. Aurbach, K. Gamolsky, B. Markovsky, Y. Gofer, M. Schmidt, and U. Heider, "On the use of vinylene carbonate (vc) as an additive to electrolyte solutions for li-ion batteries," Electrochimica acta, vol. 47, no. 9, pp. 1423-1439, 2002.
23. H. Maleki, S. Al Hallaj, J. Selman, R. Dinwiddie, and H. Wang, "Thermal properties of lithium-ion battery and components," Journal of the Electrochemical Society, vol. 146, p. 947, 1999.
24. G. Chen and T. Richardson, "Thermal instability of olivine-type LiMnPO4 cathodes," Journal of Power Sources, vol. 195, no. 4, pp. 1221-1224, 2010.
25. D. Aurbach, Y. Talyosef, B. Markovsky, E. Markevich, E. Zinigrad, L. Asraf, J. Gnanaraj, and H. Kim, "Design of electrolyte solutions for li and li-ion batteries: a review," Electrochimica acta, vol. 50, no. 2-3, pp. 247-254, 2004.
26. B. Scrosati, "Recent advances in lithium ion battery materials," Electrochimica Acta, vol. 45, no. 15-16, pp. 2461-2466, 2000.
27. Y. Baba, S. Okada, and J. Yamaki, "Thermal stability of lixcoo2 cathode for lithium ion battery," Solid State Ionics, vol. 148, no. 3-4, pp. 311-316, 2002.
28. D. MacNeil, Z. Lu, Z. Chen, and J. Dahn, "A comparison of the electrode/electrolyte reaction at elevated temperatures for various liion battery cathodes," Journal of power sources, vol. 108, no. 1-2, pp. 8-14, 2002.
29. H. Yang, H. Bang, K. Amine, and J. Prakash, "Investigations of the exothermic reactions of natural graphite anode for li-ion batteries during thermal runaway," Journal of the Electrochemical Society, vol. 152, p. A73, 2005.
30. D. Linden and T. Reddy, "Handbook of batteries," New York.
31. S. Al Hallaj, H. Maleki, J. Hong, and J. Selman, "Thermal modeling and design considerations of lithium-ion batteries," Journal of power sources, vol. 83, no. 1-2, pp. 1-8, 1999.
32. D. Bernardi, E. Pawlikowski, and J. Newman, "A general energy balance for battery systems," Journal of the Electrochemical Society, vol. 132, p. 5, 1985.
33. M. Doyle, T. Fuller, and J. Newman, "Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell," Journal of the Electrochemical Society, vol. 140, p. 1526, 1993.
34. W. Gu and C. Wang, "Thermal-electrochemical modeling of battery systems," Journal of the Electrochemical Society, vol. 147, no. 8, pp. 2910-2922, 2000.
35. K. Smith and C. Wang, "Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles," Journal of power sources, vol. 160, no. 1, pp. 662-673, 2006.
36. "Freedomcar battery test manual," vol. Rev. 3, 2003.
37. D. Andre, M. Meiler, K. Steiner, C. Wimmer, T. Soczka-Guth, and D. Sauer, "Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy i. experimental investigation," Journal of Power Sources, 2011.
38. G. Ehrlich, "Handbook of batteries," 2002.
39. K. Amine, J. Liu, and I. Belharouak, "High-temperature storage and cycling of c-lifepo4/graphite li-ion cells," Electrochemistry communications, vol. 7, no. 7, pp. 669-673, 2005.
40. H. Yang, S. Amiruddin, H. Bang, Y. Sun, and J. Prakash, "A review of li-ion cell chemistries and their potential use in hybrid electric vehicles," Journal of Industrial and Engineering Chemistry, vol. 12, no. 1, pp. 12-38, 2006.
41. S. Al-Hallaj et al., "Novel pcm thermal management makes li-ion batteries a viable option for high power applications," Battery Power Products and Technology Magazine, 2004.
42. S. Al Hallaj and J. Selman, "A novel thermal management system for electric vehicle batteries using phase-change material," Journal of the Electrochemical Society, vol. 147, p. 3231, 2000.
43. R. Kizilel, R. Sabbah, J. Selman, and S. Al-Hallaj, "An alternative cooling system to enhance the safety of li-ion battery packs," Journal of Power Sources, vol. 194, no. 2, pp. 1105-1112, 2009.
44. I. Schmitz, "Thermal modeling of automotive lithium ion cells using the finite elements method in modelica," 2009.
45. R. Mahamud and C. Park, "Reciprocating air flow for li-ion battery thermal management to improve temperature uniformity," Journal of Power Sources, 2011.
46. J. Christensen and J. Newman, "Stress generation and fracture in lithium insertion materials," Journal of Solid State Electrochemistry, vol. 10, no. 5, pp. 293-319, 2006.
47. J. Christensen, J. Newman, "A mathematical model of stress generation and fracture in lithium manganese oxide," Journal of the Electrochemical Society, vol. 153, p. A1019, 2006.
48. J. Christensen, "Modeling diffusion-induced stress in li-ion cells with porous electrodes," Journal of the Electrochemical Society, vol. 157, p. A366, 2010.
49. K. Zhao, M. Pharr, J. Vlassak, and Z. Suo, "Fracture of electrodes in lithium-ion batteries caused by fast charging," Journal of Applied Physics, vol. 108, p. 073517, 2010.
50. X. Zhang, A. Sastry, and W. Shyy, "Intercalation-induced stress and heat generation within single lithium-ion battery cathode particles," Journal of the Electrochemical Society, vol. 155, p. A542, 2008.
51. F. Orsini, A. Du Pasquier, B. Beaudoin, J. Tarascon, M. Trentin, N. Langenhuizen, E. De Beer, and P. Notten, "In situ scanning electron microscopy (sem) observation of interfaces within plastic lithium batteries," Journal of power sources, vol. 76, no. 1, pp. 19-29, 1998.
52. R. Bhattacharyya, B. Key, H. Chen, A. Best, A. Hollenkamp, and C. Grey, "In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries," Nature Materials, vol. 9, no. 6, pp. 504-510, 2010.
53. A. Lasia, "Electrochemical impedance spectroscopy and its applications," Modern aspects of electrochemistry, vol. 32, pp. 143-248, 1999.
54. J. Goodenough, "Design considerations," Solid State Ionics, vol. 69, no. 3-4, pp. 184-198, 1994.
55. Y. Zhang and C. Wang, "Cycle-life characterization of automotive lithium-ion batteries with linio cathode," Journal of the Electrochemical Society, vol. 156, p. A527, 2009.
56. M. Thomas, P. Bruce, and J. Goodenough, "Lithium mobility in the layered oxide li1-xcoo2," Solid State Ionics, vol. 17, no. 1, pp. 13-19, 1985.
57. A. Vaccaro, T. Palanisamy, R. Kerr, and J. Maloy, "Electrochemical investigations of alkali-metal intercalation reactions in tis: Chronoamperometric determination of mass and charge transport properties of liquid electrolyte systems," Journal of The Electrochemical Society, vol. 129, p. 682, 1982.
58. D. Andre, M. Meiler, K. Steiner, H. Walz, T. Soczka-Guth, and D. Sauer, "Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy ii. modelling," Journal of Power Sources, 2010.
59. T. Fuller, M. Doyle, and J. Newman, "Simulation and optimization of the dual lithium ion insertion cell," Journal of the Electrochemical Society, vol. 141, p. 1, 1994.
60. J. Forman, S. Bashash, H. Fathy, and J. Stein, "Reduction of an electrochemistry-based li-ion battery health degradation model via constraint linearization and padé approximation," preperation for submission to Journal of the Electrochemical Society.
61. C. Wang, W. Gu, and B. Liaw, "Micro-macroscopic coupled modeling of batteries and fuel cells: Part 1. model development," J. Electrochem. Soc, vol. 145, no. 10, pp. 3407-3417, 1998.
62. W. Gu, C. Wang, and B. Liaw, "Micro-macroscopic coupled modeling of batteries and fuel cells: Part 2. application to nickel-cadmium and nickel-metal hybrid cells," J. Electrochem. Soc, 1998.
63. V. Subramanian, J. Ritter, and R. White, "Approximate solutions for galvanostatic discharge of spherical particles i. constant diffusion coefficient," Journal of the Electrochemical Society, vol. 148, p. E444, 2001.
64. V. Subramanian, V. Diwakar, and D. Tapriyal, "Efficient macro-micro scale coupled modeling of batteries," Journal of The Electrochemical Society, vol. 152, p. A2002, 2005.
65. T. Jacobsen and K. West, "Diffusion impedance in planar, cylindrical and spherical symmetry," Electrochimica acta, vol. 40, no. 2, pp. 255-262, 1995.
66. K. Smith, C. Rahn, and C. Wang, "Model order reduction of 1d diffusion systems via residue grouping," Journal of Dynamic Systems, Measurement, and Control, vol. 130, p. 011012, 2008.
67. C. Smith, K.A. Rahn and C. Wang, "Model-based electrochemical estimation and constraint management for pulse operation of lithium ion batteries," Control Systems Technology, IEEE Transactions, vol. 18, no. 3, pp. 654-663, 2010.
68. L. Cai and R. White, "Reduction of model order based on proper orthogonal decomposition for lithium-ion battery simulations," Journal of the Electrochemical Society, vol. 156, p. A154, 2009.
69. J. Zhang and J. Lee, "A review on prognostics and health monitoring of li-ion battery," Journal of Power Sources, 2011.
70. F. Codeca, S. Savaresi, and G. Rizzoni, "On battery state of charge estimation: A new mixed algorithm," in Control Applications, 2008. CCA 2008. IEEE International Conference on. IEEE, 2008, pp. 102-107.
71. G. Plett, "Extended kalman filtering for battery management systems of lipb-based hev battery packs:: Part 1. background," Journal of Power sources, vol. 134, no. 2, pp. 252-261, 2004.
72. -, "Extended kalman filtering for battery management systems of lipb-based hev battery packs:: Part 2. modeling and identification," Journal of power sources, vol. 134, no. 2, pp. 262-276, 2004.
73. -, "Extended kalman filtering for battery management systems of lipb-based hev battery packs-part 3. state and parameter estimation," Journal of Power sources, vol. 134, no. 2, pp. 277-292, 2004.
74. J. Kozlowski, C. Byington, A. Garga, M. Watson, and T. Hay, "Modelbased predictive diagnostics for electrochemical energy sources," in Aerospace Conference, 2001, IEEE Proceedings., vol. 6. IEEE, 2001, pp. 3149-3164.
75. A. Salkind, C. Fennie, P. Singh, T. Atwater, and D. Reisner, "Determination of state-of-charge and state-of-health of batteries by fuzzy logic methodology," Journal of Power Sources, vol. 80, no. 1-2, pp. 293-300, 1999.
76. D. Di Domenico, G. Fiengo, and A. Stefanopoulou, "Lithium-ion battery state of charge estimation with a kalman filter based on a electrochemical model," in Control Applications, 2008. CCA 2008. IEEE International Conference on. IEEE, 2008, pp. 702-707.
77. C. Speltino, D. Di Domenico, A. Stefanopoulou, and G. Fiengo, "Experimental identification and validation of an electrochemical model of a lithium-ion battery," in Proceedings of 2009 IEEE European Control Conference, 2009.
78. R. Klein, N. Chaturvedi, J. Christensen, J. Ahmed, R. Findeisen, and A. Kojic, "State estimation of a reduced electrochemical model of a lithium-ion battery," in American Control Conference (ACC), 2010. IEEE, 2010, pp. 6618-6623.
79. K. Ng, C. Moo, Y. Chen, and Y. Hsieh, "Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithiumion batteries," Applied Energy, vol. 86, no. 9, pp. 1506-1511, 2009.
80. Y. Chiang, W. Sean, and J. Ke, "Online estimation of internal resistance and open-circuit voltage of lithium-ion batteries in electric vehicles," Journal of Power Sources, 2011.
81. B. Saha, K. Goebel, S. Poll, and J. Christophersen, "Prognostics methods for battery health monitoring using a bayesian framework," Instrumentation and Measurement, IEEE Transactions on, vol. 58, no. 2, pp. 291-296, 2009.
82. B. Saha and K. Goebel, "Modeling li-ion battery capacity depletion in a particle filtering framework," in Proceedings of the annual conference of the prognostics and health management society, 2009.
83. B. Saha, K. Goebel, S. Poll, and J. Christophersen, "An integrated approach to battery health monitoring using bayesian regression and state estimation," in Autotestcon, 2007 IEEE. IEEE, 2007, pp. 646- 653.
84. M. Sternad, M. Cifrain, D. Watzenig, G. Brasseur, and M. Winter, "Condition monitoring of lithium-ion batteries for electric and hybrid electric vehicles," e & i Elektrotechnik und Informationstechnik, vol. 126, no. 5, pp. 186-193, 2009.
85. S. Zhang, "The effect of the charging protocol on the cycle life of a liion battery," Journal of power sources, vol. 161, no. 2, pp. 1385-1391, 2006.
86. V. Boovaragavan and V. Subramanian, "Evaluation of optimal discharge current profile for planar electrodes to maximize the utilization," Journal of Power Sources, vol. 173, no. 2, pp. 1006-1011, 2007.
87. V. Subramanian, V. Boovaragavan, V. Ramadesigan, and M. Arabandi, "Mathematical model reformulation for lithium-ion battery simulations: Galvanostatic boundary conditions," Journal of The Electrochemical Society, vol. 156, p. A260, 2009.
88. R. Methekar, V. Ramadesigan, R. Braatz, and V. Subramanian, "Optimum charging profile for lithium-ion batteries to maximize energy storage and utilization," ECS Trans, vol. 25, no. 35, pp. 139-146, 2010.
89. S. Rahimian, S. Rayman, and R. White, "Maximizing the life of a lithium-ion cell by optimization of charging rates," Journal of The Electrochemical Society, vol. 157, p. A1302, 2010.
90. R. Klein, N. Chaturvedi, J. Christensen, J. Ahmed, R. Findeisen, and A. Kojic, "Optimal charging strategies in lithium-ion battery," in American Control Conference (ACC), 2011. IEEE, 2011, pp. 382-387.
91. J. Kimball, B. Kuhn, and P. Krein, "Increased performance of battery packs by active equalization," in Vehicle Power and Propulsion Conference, 2007. VPPC 2007. IEEE. IEEE, 2007, pp. 323-327.
92. A. Baughman and M. Ferdowsi, "Double-tiered switched-capacitor battery charge equalization technique," Industrial Electronics, IEEE Transactions on, vol. 55, no. 6, pp. 2277-2285, 2008.
93. H. Park, C. Kim, C. Kim, G. Moon, and J. Lee, "A modularized charge equalizer for an hev lithium-ion battery string," Industrial Electronics, IEEE Transactions on, vol. 56, no. 5, pp. 1464-1476, 2009.
94. S. Moura, J. Forman, S. Bashash, J. Stein, and H. Fathy, "Optimal control of film growth in lithium-ion battery packs via relay switches," Industrial Electronics, IEEE Transactions on, no. 99, pp. 1-1, 2009.