Effect of microalloying elements (Nb, V and Ti) on the hot flow behavior of high-Mn austenitic twinning induced plasticity (TWIP) steel

Materials Science and Engineering: A

Volumn 560, Issue , 2013, Pages 552-560

  Reyes Calderon F ^a   Mejia I ^a   Boulaajaj, A ^b,c   Cabrera, J M ^b,c  

^a UNIVERSIDAD MICHOACANA DE SAN NICOLÁS DE HIDALGO   (Mexico)

^b UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^c FUNDACIÓ CTM CENTRE TECNOLÒGIC   (Spain)

Author keywords

Austenitic grain size; Dynamic recrystallization (DRX); Hot flow behavior; Microalloying elements; Twinning induced plasticity (TWIP) steel

Indexed keywords

AUSTENITE; BACKSCATTERING; COMPRESSION TESTING; DYNAMIC RECRYSTALLIZATION; GRAIN SIZE AND SHAPE; MICROALLOYING; PLASTICITY; STEEL; STRAIN RATE;

AUSTENITIC; AUSTENITIC GRAIN SIZE; DYNAMIC RECRYSTALLIZATION (DRX); HIGH MN; HOT FLOW BEHAVIORS; MICRO-ALLOYING ELEMENTS; P-VALUES; TWINNINGINDUCED PLASTICITY (TWIP) STEEL; WORK STUDY;

GRAIN REFINEMENT;

EID: 84869089062     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2012.09.101     Document Type: Article

References (54)

1. Grässel O., Krüger L., Frommeyer G., Meyer L.W. Int. J. Plasticity 2000, 16:1392-1409.
2. Scott C., Allain S., Faral M., Guelton N. Rev. Metall. 2006, 103:293-302.
3. Saeed-Akbari A., Imlau J., Prahl U., Bleck W. Metall. Mater. Trans. A 2009, 40:3076-3090.
4. Allain S., Chateau J.P., Bouaziz O., Migot S., Guelton N. Mater. Sci. Eng. A 2004, 387-389:158-162.
5. A.S. Hamada, in: O. Vuolteenaho, K. Nurkkala, J. Kostamovaara (Eds.), Manufacturing, mechanical properties and corrosion behavior of high-Mn TWIP steels, Acta Universitatis Ouluensis. Oulu, Finland, 2007, p. 51.
6. Kliber J., Kursa T., Schlinder I. Metallurgist-Metallurgical News 2008, 8:481-483.
7. Hamada A.S., Karjalainen L.P., Somani M.C. Mater. Sci. Eng. A 2007, 467:114-124.
8. Hamada A.S., Karjalainen L.P., Somani M.C. Can. Metall. Quart. 2007, 46:47-56.
9. Bracke L., Penning J., Akdut N. Metall. Mater. Trans. A 2007, 38:520-528.
10. Cabañas N., Penning J., Akdut N., De Cooman B. Metall. Mater. Trans. A 2006, 37:3305-3315.
11. J. Kliber, K. Drozd, I. Mamuzić, in: J. Kliber (Ed.), Stress-strain behaviour and softening in manganese twip steel tested in thermal-mechanical simulator, Metal, Hradec nad Moravicí, Czec Republic, 2009. pp. 1-10.
12. Bleck W., Phiu-on K., Heering C., Hirt G. Steel. Res. Int. 2007, 78:536-545.
13. Sakai T., Jonas J.J. Acta. Metall. 1984, 32:189-209.
14. C.M. Sellars, G.J. Davies, in: C.M. Sellars, G.J. Davies (Eds.), Hot working and forming processes, International conference on hot working and forming processes-1979, University of Sheffield, England, 1980, p. 282.
15. Roberts W., Ahlblom B. Acta Metall. 1978, 26:801-813.
16. Dehghan-Manshadi A., Barnett M.R., Hodgson P.D. Metall. Mater. Trans. A 2008, 39:1359-1370.
17. Fernández A., Uranga P., López B., Rodríguez-Ibabe J. Mater. Sci. Eng. A 2003, 361:367-376.
18. Cuddy L., Raley J. Metall. Mater. Trans. A 1983, 14:1989-1995.
19. Cabrera J.M., Prado J.M., Barrón M.A. Steel Res. 1999, 70:59-66.
20. Reyes F., Calvo J., Cabrera J.M., Mejía I. Steel Res. Int. 2012, 83:334-339.
21. Dobrzański L.A., Grajcar A., Borek W. JAMME 2008, 29:139-142.
22. Dobrzański L.A., Borek W. JAMME 2009, 37:397-407.
23. Humphreys F.J., Hatherly M. Recrystallization and Related Annealing Phenomena 2004, Pergamon Press, Oxford, U.K. 2nd ed.
24. Sabet M., Zarei-Hanzaki A., Khoddam Sh. J. Eng. Mater. Technol. 2009, 131:1-5.
25. Akben M.G., Weiss I., Jonas J. Acta Metall. 1981, 29:111-121.
26. Petukhov B. Crystallogr. Rep. 2007, 52:112-122.
27. Ryan N.D., McQueen H.J. High Temp. Technol. 1990, 8:185-200.
28. Cabrera J.M., Al-Omar A., Prado J.M., Jonas J.J. Metall. Mater. Trans. A 1997, 28:2233-2244.
29. Cabrera J.M., Jonas J.J., Prado J.M. Metall. Mater. Sci. Technol. 1996, 12:579-585.
30. Sellars C.M., McTegart W.J. Acta Metall. 1966, 14:1136-1138.
31. Mirzadeh H., Najafizadeh A., Moazeny M. Metall. Mater. Trans. A 2009, 40:2950-2958.
32. Mirzadeh H., Cabrera J.M., Najafizadeh A. Metall. Mater. Trans. A 2012, 43:108-123.
33. Li D., Feng Y., Yin Z., Shangguan F., Wang K., Liu Q., Hu F. Mater. Design 2011, 34:713-718.
34. Li D., Feng Y., Yin Z., Shangguan F., Wang K., Liu Q., Hu F. Mater. Sci. Eng. A 2011, 528:8084-8089.
35. Gourdet S., Montheillet F. Mater. Sci. Eng. A 2000, 283:274-288.
36. Derby B., Ashby M.F. Scripta Metall. 1987, 21:879-884.
37. McQueen H.J., Jonas J.J. The recovery and recrystallization behavior during high temperature deformation. The Plastic Deformation of Materials 1975, 393-493. Academic Press, New York. J.R. Arsenault (Ed.).
38. Derby B. Scripta Metall. Mater. 1992, 27:1581-1585.
39. Medina S.F., Quispe A., Valles P., Baños J.L. ISIJ Int. 1999, 39:913-922.
40. Medina S.F., Mancilla J.E. ISIJ Int. 1996, 36:1063-1069.
41. Andrade H., Akben M., Jonas J.J. Metall. Mater. Trans. A 1983, 14:1967-1977.
42. Dobrzański L.A., Grajcar A., Borek W. JAMME 2008, 31:7-14.
43. Sellars C.M. Deformation Processing and Structure 1983, 245-278. ASM, Metals Park, OH. G. Krausz (Ed.).
44. McQueen H.J., Cui Y., Li B., Meng Q., Ryan N.D. Strip Casting, Hot and Cold Working of Stainless Steel 1993, Metallurgical Society of CIMM, Montreal, pp. 181-192. N.D. Ryan, A. Brown, H.J. McQueen (Eds.).
45. McQueen H.J. Mater. Sci. Eng. A 1987, 101:149-160.
46. McQueen H.J., Evangelista E., Ryan N.D. Recrystallization ('90) in Metals and Materials 1990, 89-100. TMS-AIME, Warrendale, PA. T. Chandra (Ed.).
47. Sellars C.M. Philos. Trans. R. Soc. London. A 1978, 288:147-158.
48. Rossard C. Microstructure and Design of Alloys 1973, vol. 2. ICSMA 3, Institute of Metals, London, pp. 175-203.
49. Roberts W. Strength of Metals and Alloys 1985, Vol. 3:1859-1892. Pergamon Press, Oxford.
50. Evangelista E., Ryan N.D., McQueen H.J. Metal. Sci. Tech. 1987, 5:50-58.
51. Ryan N.D., McQueen H.J. J. Mater. Proc. Technol. 1990, 20:177-199.
52. H. Mecking, G. Gottstein, in: F. Haessner, (Ed.), Recrystallization of Metallic Materials, Dr. Reiderer Verlag Stuttgart, 1977, pp. 195-212.
53. McQueen H.J., Yue S., Ryan N.D., Fry E. J. Mater. Proc. Technol. 1995, 53:293-310.
54. Sakai T., Akben M.G., Jonas J.J. Acta Metall. 1983, 31:631-642.