Composites 'salt inside porous matrix' for adsorption heat transformation: A current state-of-the-art and new trends

International Journal of Low-Carbon Technologies

Volumn 7, Issue 4, 2012, Pages 288-302

  Gordeeva, L G ^a   Aristov, Yu I ^a  

^a BORESKOV INSTITUTE OF CATALYSIS   (Russian Federation)

Author keywords

Adsorption heat transformation; Composite sorbents 'salt in porous matrix'; Harmonization of adsorbent and the AHT cycle; Target oriented designing

Indexed keywords

ADSORPTION HEATS; CHEMICAL NATURE; DESICCANT COOLING; HARMONIZATION OF ADSORBENT AND THE AHT CYCLE; HOST MATRICES; POROUS MATRIXS; POROUS STRUCTURES; SOLID SORBENTS; SORPTION PROPERTIES; SYNTHESIS CONDITIONS; TARGET-ORIENTED DESIGNING; TWO-COMPONENT; VENTILATION SYSTEMS;

ADSORPTION; CARBON DIOXIDE; DRIERS (MATERIALS); GLOBAL WARMING; HEAT STORAGE; VENTILATION;

LINEAR TRANSFORMATIONS;

EID: 84869030539     PISSN: 17481317     EISSN: 17481325     Source Type: Journal    
DOI: 10.1093/ijlct/cts050     Document Type: Article

References (128)

1. Critoph RE, Zhong Y. Review of trends in solid sorption refrigeration and heat pumping technology. J Process Mech Eng Proc IMechE 2005;219:285-300.
2. Wang LW, Wang RZ, Oliveira RG. A review on adsorption working pairs for refrigeration. Renew Sustain Energ Rev 2009;13:518-34.
3. Aristov YuI. Challenging offers of material science for adsorption heat transformation: A review. Appl Therm Engn doi:10.1016/ j.applthermaleng.2011.09.003.
4. Aristov YuI, Tokarev MM, Cacciola G, et al. Selective water sorbents for multiple application, 1. CaCl2 confined in mesopores of silica gel: sorption properties. React Kinet Catal Lett 1996;59:325-35.
5. Aristov YuI, Restuccia G, Cacciola G, et al. A family of new working materials for solid sorption air conditioning systems. Appl Therm Engn 2002;22:191-204.
6. Gordeeva LG, Freni A, Restuccia G, et al. Influence of characteristics of methanol sorbents "salt in mesoporous silica" on the performance of adsorptive air conditioning cycle. Ind Eng Chem Res 2007;46:2747-52.
7. 2 in inorganic host matrix": isosteric chart and its performance. Int J Low Carbon Techn 2006;1:191-200.
8. Gordeeva LG, Restuccia G, Cacciola G, et al. Selective water sorbents for multiple applications: 5. LiBr confined in mesopores of silica gel: sorption properties. React Kinet Catal Lett 1998;63:81-8.
9. Petit C, Karwacki C, Peterson G, et al. Interactions of ammonia with the surface of microporous carbon impregnated with transition metal chlorides. J Phys Chem C 2007;111:12705-14.
10. Hirata Y, Fujioka K, Fujiki S. Preparation of fine particles of calcium chloride with expanded graphite for enhancement of the driving reaction for chemical heat pumps. J Chem Eng Japan 2003;36:827-32.
11. Isobe H. Dehydrating substance. US Patent No 1,740,351. 17.12.1929.
12. Chi CW, Wasan DT. Measuring the equilibrium pressure of supported and unsupported adsorbents. Ind Eng Chem Fundam 1969;8:816-8.
13. Heiti RV, Thodos G. Energy release in the dehumidification of air using a bed of CaCl2-impregnated Celite. Ind Eng Chem Fundam 1986;25:768-71.
14. Daou K, Wang RZ, Xia ZZ. Development of a new synthesized adsorbent for refrigeration and air conditioning applications. Appl Therm Engn 2006;26:56-65.
15. 2 impregnated composite adsorbent to those of the host silica gel. Int J Therm Sci 2008;47:68-75.
16. 2 impregnated composite adsorbent and those of the host silica gel. Int J Refrig 2007;30:68-75.
17. Dawoud B. A hybrid solar-assisted adsorption cooling unit for vaccine storage. Renew Energ 2007;32:947-64.
18. Hai-jun C, Qun C, Ying T, et al. Attapulgite based LiCl composite adsorbents for cooling and air conditioning applications. Appl Therm Eng 2008;28:2187-93.
19. 2 composite adsorbent for chemical adsorption chillers. Energy Conversion Manage 2006;47:1902-12.
20. Fujioka K, Takemori T, Hisazumi Y, et al. Development of integrated reactor of plate-fin heat exchanger and composite reactant of calcium chloride. In: Proceedings of International Symposium on Innovative Materials for Processes in Energy Systems, Kyoto, Japan, 2007. Paper ID: A038 (on CD).
21. Kumita M, Nakamura M, Mori S, et al. Water sorption on high-density activated carbon fiber impregnated with calcium chloride. In: Proceedings of International Symposium on Innovative Materials for Processes in Energy Systems, Kyoto, Japan, 2007. Paper ID: A036 (on CD).
22. San JY, Hsu HC. Performance of a multi-bed adsorption heat pump using SWS-1L composite adsorbent and water as the working pair. Appl Therm Eng 2009;29:1606-13.
23. Hamed AM. Desorption characteristics of desiccant bed for solar dehumidification/ humidification air conditioning systems. Renew Energ 2003;28:2099-111.
24. Ge TS, Li Y, Dai YJ, et al. Performance investigation on a novel two-stage solar driven rotary desiccant cooling system using composite desiccant materials. Solar Energy 2010;84:157-59.
25. Stach H, Mugele J, Jänchen J, et al. Influence of cycle temperatures on the thermochemical heat storage densities in the systems water/microporous and water/mesoporous ddsorbents. Adsorption 2005;11:393-404.
26. 2-containing materials as heat storage media. Chem Lett 2004;33:292-93.
27. Wu H, Wang S, Zhu D, et al. Numerical analysis and evaluation of an open-type thermal storage system using composite sorbents. Int J Heat Mass Transfer 2009;52:5262-65.
28. 2 sorbent for low grade heat storage. Int J Therm Sci 2006;45:804-13.
29. Jänchen J, Ackermann D, Stach H, et al. Studies of the water adsorption on zeolites and modified mesoporous materials for seasonal storage of solar heat. Solar Energy 2004;76:339-44.
30. Aristov YuI, Mezentsev IV, Mukhin VA. A study of the moisture exchange under air filtration through an adsorbent layer. J Eng Therm Phys 2005;78:248-55.
31. Aristov YUI, Mezentsev IV, Mukhin VA. A new approach to regenerating heat and moisture in ventilation systems. Energ Buildings 2008;40: 204-08.
32. Aristov YUI. Novel materials for adsorptive heat pumping and storage: screening and nanotailoring of sorption properties (review). J Chem Engn Jpn 2007;40:1139-53.
33. Sharonov VE, Aristov YUI. Chemical and adsorption heat pumps: comments on the second law efficiency. Chem Eng J 2008;136:419-24.
34. Meunier F, Poyelle F, LeVan MD. Second-law analysis of adsorptive refrigeration cycles: the role of thermal coupling entropy production. Appl Therm Eng 1997;17:43-55.
35. Greg S, Sing K. Adsorption, Specific Surface, Porosity. Academic Press, 1967, 306.
36. Yang RT. Adsorbents: Fundamentals and Applications. John Wiley & Sons Inc., 2003, 410.
37. Bourikas K, Kordulis C, Lycourghiotis A. The role of the liquid-solid interface in the preparation of supported catalysts. Catal Rev 2006;48:363-444.
38. Okada K, Nakanome M, Kameshima Y, et al. Water vapor adsorption of CaCl2-impregnated activated carbon. Mater Res Bull 2010;45:1549-553.
39. Fortier H, Westreich P, Selig S, et al. Ammonia, cyclohexane, nitrogen and water adsorption capacities of an activated carbon impregnated with increasing amounts of ZnCl2, and designed to chemisorb gaseous NH3 from an air stream. J Colloid Interface Sci 2008;320:423-35.
40. Bandosz TJ, Petit C. On the reactive adsorption of ammonia on activated carbons modified by impregnation with inorganic compounds. J Colloid Interface Sci 2009;338:329-45.
41. Khattak AK, Afzal M, Saleem M, et al. Surface modification of alumina by metal doping. Colloid Surf A Physicochem Eng Aspects 2000;162:99-106.
42. Xin L, Huiling L, Siqi H, et al. Dynamics and isotherms of water vapor sorption on mesoporous silica gels modified by different salts. Kin Catal 2010;51:754-61.
43. Wu H, Wang S, Zhu D. Effects of impregnating variables on dynamic sorption characteristics and storage properties of composite sorbent for solar heat storage. Sol Energy 2007;81:864-71.
44. Gong LX, Wang RZ, Xia ZZ, et al. Adsorption equilibrium of water on composite adsorbent employing lithium chloride in silica gel. J Chem Eng Data 2010;55:2920-23.
45. Gordeeva L, Freni A, Krieger T, et al. Composites "lithium halides in silica gel pores": Methanol sorption equilibrium. Micropor Mesopor Mater 2008;112:264-71.
46. Gordeeva LG, Glaznev IS, Savchenko EV, et al. Impact of phase composition on water adsorption on inorganic hybrids "salt/silica". J Colloid Interface Sci 2006;301:685-91.
47. Mrowiec-Bialon J, Jarzebski AB, Lachowski AL, et al. Effective inorganic hybrid adsorbents of water vapor by the sol-gel method. Chem Mater 1997;9:2486-90.
48. 2 sol-gel composites. React Kinet Catal Lett 1999;66:113-120.
49. 2-LiBr nanocomposite sol-gel adsorbents of water vapor: preparation and properties. J Colloid Interface Sci 1999;218:500-3.
50. Cui Q, Tao G, Chen H, et al. Environmentally benign working pairs for adsorption refrigeration. Energy 2005;30:261-71.
51. Gordeeva L, Aristov Yu. Novel sorbents of ethanol "salt confined to porous matrix" for adsorptive cooling. Energy 2010;35:2703-08.
52. Zhang XJ, Qiu LM. Moisture transport and adsorption on silica gel-calcium chloride composite adsorbents. Energy Convers Manage 2007;48:320-26.
53. Oliveira RG, Wang RZ, Li TX. Adsorption characteristics of methanol in activated carbon impregnated with lithium chloride. Chem Eng Technol 2010;33:1679-86.
54. Okada K, Nakanome M, Kameshima Y. et al. Water vapor adsorption of CaCl2-impregnated activated carbon. Mater Res Bull 2010;45:1549-53.
55. Dellero T, Sarmeo D, Touzain Ph. A chemical heat pump using carbon fibers as additive. Part I: enhancement of thermal conduction. Appl Therm Eng 1999;19:991-1000.
56. 2 system. Appl Therm Eng 2002;22:1163-73.
57. Fujioka K, Hatanaka K, Hirata Y. Composite reactants of calcium chloride combined with functional carbon materials for chemical heat pumps. Appl Therm Eng 2008;28:304-10.
58. Alyousef Y, Antukh AA, Tsitovich AP, et al. Three adsorbers solar cooler with composite sorbent bed and heat pipe thermal control. Appl Therm Eng 2012;38:124-30.
59. Simonova IA, Freni A, Restuccia G. et al. Water sorption on composite "silica modified by calcium nitrate". Micropor Mesopor Mater 2009;122:223-8.
60. Ponomarenko IV, Glaznev IS, Gubar AV, et al. Synthesis and water sorption properties of a new composite "CaCl2 confined into SBA-15 pores". Micropor Mesopor Mater 2010;129:243-50.
61. 2/SBA-15 for adsorptive transformation of low temperature heat: pore size effect. Int J Refrig 2011;34:1244-50.
62. 2 confined in micropores of the silica gel: sorption properties. React Kinet Catal Lett 1996;59:335-42.
63. Gordeeva LG, Grekova AD, Krieger TA, et al. Adsorption properties of composite materials (LiCl+LiBr)/silica". Micropor Mesopor Mater 2009;126:262-67.
64. Gordeeva LG, Grekova AD, Krieger TA, et al. Composites "binary salts in porous matrix" for adsorption heat transformation. Appl Therm Eng Doi: 10.1016/j.applthermaleng.2011.07. 040.
65. Grekova AD, Veselovskaya JV, Tokarev MM, et al. Novel ammonia sorbents "porous matrix modified by active salt" for adsorptive heat transformation: 5. Designing the composite adsorbent for ice makers. Appl Therm Eng 2012;37:80-86.
66. Veselovskaya JV, Grekova AD, Tokarev MM, et al. Novel ammonia sorbents "porous matrix modified by active salt" for adsorptive heat transformation: 6. The ways of adsorption dynamics enhancement. Appl Therm Eng 2012;37:87-94.
67. Womgsuwan W, Kumar S, Neveu P, et al. A review on chemical heat pump technology and applications. Appl Therm Eng 2001;21:1489-519.
68. Pons M, Meunier F, Cacciola G, et al. Thermodynamic based comparison of sorption systems for cooling and heat pumping. Int J Refrig 1999;22:5-17.
69. Wentworth WE, Johnston DW, Raldow WM. Chemical heat pumps using a dispersion of a metal salt ammoniate in an inert solvent. Sol Energy 1981;26:141-46.
70. Lebrun M, Spinner B. Models of heat and mass transfer in solid-gas reactors used as chemical heat pumps. Chem Eng Sci 1990;45:1743-53.
71. Goetz V, Marty A. A model for reversible solid-gas reactions submitted to temperature and pressure constrains: simulation of the rate of reaction in solid-gas reactor used as chemical heat pump. Chem Eng Sci 1992;47:4445-54.
72. Goetz V, Elie F, Spinner B. The structure and performance of single-effect solid-gas chemical heat pumps. Heat Recovery Systems and CHP 1993;13:79-96.
73. 3. J Chem Thermodyn 1981;14:159-76.
74. Offenhartz POD, Brown FC, Mar R, et al. A heat pump and thermal storage system for solar heating and cooling based on the reaction of calcium chloride and methanol vapor. J Sol Energ Eng T ASME 1980;102:59-65.
75. Zhang LZ, Wang L. Momentum and heat transfer in the adsorbent of a waste heat adsorption cooling system. Energy 1999;24:605-24.
76. Coste C, Mauran S, Crozat G. Gaseous-solid reaction. US Patent No 4,595,774. 17.06.1986.
77. Mauran S, Lebrun M, Prades P, et al. Active composite and its use as reaction medium. US Patent No 5,283,219, 1.02.1994.
78. Vasiliev LL, Kanonchik LE, Antujh AA, et al. NaX, carbon fibre and CaCl2 ammonia reactors for heat pumps and refrigerators. Adsorption 1996;2:311-16.
79. Vasiliev L, Nikanpour D, Antukh A, et al. Multisalt-carbon chemical cooler for space applications. J Eng Phys Thermophys 1999;72:595-600.
80. Wang LW, Wang RZ, Wu JY, et al. Adsorption ice makers for fishing boats driven by the exhaust heat from diesel engine: choice of adsorption pair. Energy Convers Manage 2004;45:2043-57.
81. 2/activated carbon as compound adsorbent. Appl Therm Eng 2008;28:1638-46.
82. Li TX, Wang RZ, Wang LW, et al. Study on the heat transfer and sorption characteristics of a consolidated composite sorbent for solar-powered thermochemical cooling systems. Sol Energy 2009;83:1742-55.
83. Gong L, Wang Z. Preparation and study the characteristics of a new composite adsorbent employing lithium chloride in silica gel. In: Saha BB, Chakraborty A, Ng KC (eds). Innovative Materials for Processing in Energy Systems for Fuel Cells, Heat Pumps and Sorption Systems. Research publishing, 2010, 33-8.
84. Gong LX, Wang RZ, Xia ZZ, et al. Study on an adsorption chiller employing lithium chloride in silica gel and methanol: design and experimental study. In: Proceedings of International Sorption Heat Pump Conference, Padua, Italy, 2011, 329-39.
85. Freni A, Sapienza A, Glaznev IS, et al. Experimental testing of a lab-scale adsorption chiller using a novel selective water sorbent "silica modified by calcium nitrate". Int J Refrig 2012;35:518-24.
86. Sapienza A, Glaznev IS, Santamaria S, et al. Adsorption chilling driven by low temperature heat: new adsorbent and cycle optimization. Appl Therm Eng 2012;32:141-46.
87. Oliveira RG, Wang RZ, Kiplagat JK, et al. Novel composite sorbent for resorption systems and for chemisorption air conditioners driven by low generation temperature. Renew Energ 2009;34:2757-64.
88. Kiplagat JK, Wang RZ, Oliveira RG, et al. Lithium chloride-expanded graphite composite sorbent for solar powered ice maker. Sol Energy 2010;84:1587-94.
89. Veselovskaya JV, Tokarev MM. Novel ammonia sorbents "porous matrix modified by active salt" for adsorptive heat transformation: 4. Dynamics on quasi-isobaric sorption and desorption on BaCl2/vermiculite. Appl Therm Eng 2011;31:566-72.
90. Halliday SP, Beggs CB, Sleigh PA. The use of solar desiccant cooling in the UK: a feasibility study. Appl Therm Eng 2002;22:1327-38.
91. Sumathy K, Yeung KH, Yong L. Technology development in the solar adsorption refrigeration systems. Progress Energ Combus Sci 2003;29:301-27.
92. Liang CH, Zhang LZ, Pei LX. Performance analysis of a direct expansion air dehumidification system combined with membrane-based total heat recovery. Energy 2010;35:3891-901.
93. Jia CX, Dai YJ, Wu JY, et al. Use of compound desiccant to develop high performance desiccant cooling system. Int J Refrig 2007;30:345-53.
94. Jia CX, Dai YJ, Wu JY, et al. Experimental comparison of two honeycombed desiccant wheels fabricated with silica gel and composite desiccant material. Energy Convers Manage 2006;47:2523-34.
95. Zhang XJ, Sumathy K, Dai YJ, et al. Dynamic hygroscopic effect of the composite material used in desiccant rotary wheel. Sol Energy 2006;80:1058-61.
96. 2 desiccant particles. Sol Energy 2009;83:1861-70.
97. N'Tsoukpoe KE, Liu H, Le Pierre's N, et al. A review on long-term sorption solar energy storage. Renew Sustain Energ Rev 2009;13:2385-96.
98. Hongois S, Stevens P, Coince A-S, et al. Thermochemical storage using composite materials. In: Proceedings of Eurosun 2008, 1st International Conference on Solar Heating, Cooling Buildings, Lisbon, Portugal, 2008.
99. Boer RD, Haije W, Veldhuis J, et al. Solid sorption cooling with integrated storage: the SWEAT prototype. In: Proceedings of HPC 2004, 3rd International Heat Powered Cycles Conference, Larnaca, Cyprus, 2004.
100. 2 impregnated attapulgite for thermochemical storage of heat. Thermochim Acta 2005;434:37-41.
101. 2. Thermochim Acta 2010;502:73-6.
102. Zhu D, Wu H, Li J, et al. Highly efficient adsorptive composite for thermal energy storage. Chem Engi (China) 2006;34:58-60.
103. Aristov YuI, Mezentsev IS, Mukhin VA. New approach to regenerating heat and moisture in ventilation systems. 1. Laboratory prototype. J Eng Thermophys 2006;79:143-50.
104. Aristov YuI, Mezentsev IS, Mukhin VA. New approach to regenerating heat and moisture in ventilation systems. 2. Prototype of real unit. J Eng Thermophys 2006;79:151-157.
105. Zhang LZ, Niu JL. Indoor humidity behaviors associated with decoupled cooling in hot and humid climates. Building Environ 2003;38:99-107.
106. Zhang LZ. Fabrication of a lithium chloride solution based composite supported liquid membrane and its moisture permeation analysis. J Membrane Sci 2006;276:91-100.
107. Zhang LZ, Niu JL. Performance comparisons of desiccant wheels for air dehumidification and enthalpy recovery. Appl Therm Eng 2002;22:1347-67.
108. Pei LX, Lv ZM, Zhang LZ. Selective adsorption of a novel high selective desiccant for prospective use in heat and moisture recovery for buildings. Building Environ 2012;49:124-28.
109. Aristov YuI, Gordeeva LG. "Salt in a porous host-matrix" adsorbents: design of the phase composition and sorption properties. Russ Kinet Catal 2009;50:65-72.
110. Diaconescu R, Secula MS, Petrescu S. Study of gas drying by adsorption on composite materials using neural networks. Revist Chim 2009;60:1065-69.
111. Glaznev IS, Salnikova IV, Alekseev VN, et al. ARTIC-1: a new humidity buffer for showcases. Stud Conserv 2009;54:133-148.
112. Tanashev YuYu, Parmon VN, Aristov YuI. Heat front retardation in a porous medium containing evaporating liquid. J Engn Physics Thermophys 2001;74:1053-58.
113. Okunev AG, Sharonov VE, Gubar AV, et al. Sorption of carbon dioxide by the composite sorbent of potassium carbonate in porous matrix. Russ Chem Bull 2003;52:359-63.
114. Freni A, Russo F, Vasta S, et al. An advanced solid sorption chiller using SWS-1L. Appl Therm Engn 2007;27:2200-04.
115. Nunez T, Henning HM, Mittelbach W. High energy density heat storage system - achievements and future work. In: Proceedings of 9th International Conference on Thermal Energy Storage, Futurestock, Warsaw, Poland, 2003.
116. Gmelins Handbuch der Anorganischen Chemie, 8th edn. Springer, 1998.
117. Kirk-Othmer Enciclopedia of Chemical Technology, 4th edn. John Wiley & Sons Inc., 2001.
118. Gordeeva LG, Freni A, Aristov YuI, et al. Composite sorbent of methanol "lithium chloride in mesoporous silica gel" for adsorption cooling machines: performance and stability evaluation. Ind Eng Chem Res 2009;48:6197-202.
119. Aristov YuI, Sharonov VE, Tokarev MM. Universal relation between the boundary temperatures of a basic cycle of sorption heat machines. Chem Engn Sci 2008;63:2907-12.
120. Kaneko K, Ishii C. Superhigh surface area determination of microporous solid. Colloids Surf 1992;67:203-12.
121. Iijima S. Helical microtubules of graphitic carbon. Nature 1991;354:56-58.
122. Guo Y, Zhou L, Zhao W, et al. A multipurpose anodic alumina supported metal monolithic catalysts for steam reforming of hydrocarbon. In: Saha BB, Chakraborty A, Ng KC (eds). Innovative Materials for Processing in Energy Systems for Fuel Cells, Heat Pumps and Sorption Systems. Research Publishing, 2010, 409-16.
123. Corma A. From microporous to mesoporous molecular sieve materials and their use in catalysis. Chem Rev 1997;97:2373-420.
124. Lakiss L, Rivallan M, Goupil J-M, et al. Self-assembled titanosilicate TS-1 nanocrystals in hierarchical structures. Catal Today 2011;168:112-117.
125. 2-vermiculite": a promising new candidate for storage of middle temperature heat. Energy 2012; doi:10.1016/j.energy.2012.04.045.
126. 2H NMR. J Phys Chem C 2008;112:12853-60.
127. Aristov YI, Kovalevskaya YA, Tokarev MM, et al. Low temperature heat capacity of the system "silica gel - calcium chloride - water". J Ther Anal Calorimetry 2011;103:773-78.
128. Glaznev IS, Ovoshchnikov DS, Aristov YI. Kinetics of water adsorption/desorption under isobaric stages of adsorption heat transformers: the effect of isobar shape. Int. J. Heat. Mass. Transfer. 2009;52:1774-7.