Effects of multi-walled carbon nanotubes on rheological and physical properties of polyamide-based thermoplastic elastomers

Korea Australia Rheology Journal

Volumn 24, Issue 3, 2012, Pages 221-227

  Bae, Won Sik ^a   Kwon, Oh Joo ^a   Kim, Byoung Chul ^a   Chae, Dong Wook ^b  

^a Hanyang University   (South Korea)

^b Kyungpook National University   (South Korea)

Author keywords

Carbon nanotubes; Nanocomposites; Rheology; Thermoplastic elastomers

Indexed keywords

EID: 84869022010     PISSN: 1226119X     EISSN: 20937660     Source Type: Journal    
DOI: 10.1007/s13367-012-0027-9     Document Type: Article

References (28)

1. Ajayan, P.M., O. Stephan, C. Colliex, and D. Trauth, 1994, Aligned carbon nanotube arrays formed by cutting a polymer resin-nanotube composite, Science 265, 1212-1214
2. Bondar, V.I., B.D. Freeman, and I. Pinnau, 1999, Gas sorption and characterization of poly(ether-b-amide) segmented block copolymer, J. Polym. Sci. Part B: Polym. Phys. 37, 2463-2475
3. Chae, D.W. and B.C. Kim, 2005, Physical properties of isotactic poly(propylene)/silver nanocomposites: Dynamic crystallization behavior and resultant morphology, Macromol. Mater. Eng. 290, 1149-1156
4. Chae, D.W., J.H. Lim, J.S. Seo, and B.C. Kim, 2012, Variation of physical properties of nylon-66/clay nanocomposites with preparation conditions, Korea-Aust. Rheol. J. 24, 45-52
5. Chae, D.W., K.J. Kim, and B.C. Kim, 2006, Effects of silicalite-1 nanoparticles on rheological and physical properties of HDPE, Polymer 47, 3609-3615
6. Chae, D.W., K.H. Lee, and B.C. Kim, 2006, Rheological properties of ferrite nanocomposites based on nylon-66, J. Polym. Sci. Part B: Polym. Phys. 44, 371-377
7. Deleens, G., 1981, A new generation of thermoplastic elastomers the polyether block amide (PEBA), Presented at 39th Ann. Tech. Conf. of SPE, Boston, May 4-7
8. Flesher, J.R., 1986, Pebax polyether block amide - a new family of engineering thermoplastic elastomers, Abstracts of Papers of the American Chemical Society 191, 64
9. Grossiord, N., H.E. Miltner, J. Loos, J. Meuldijk, B.V. Mele, and C.E. Koning, 2007, On the crucial role of wetting in the preparation of conductive polystyrene-carbon nanotube composites, Chem. Mater. 19, 3787-3792
10. Hwang, T.Y., S.M. Lee, Y.J. Ahn, and J.W. Lee, 2008, Development of polypropylene-clay nanocomposite with supercritical CO2 assisted twin screw extrusion, Korea-Aust. Rheol. J. 20, 235-243
11. Hyun, K., H.T. Lim, and K.H. Ahn, 2012, Nonlinear response of polypropylene (PP)/Clay nanocomposites under dynamic oscillatory shear flow, Korea-Aust. Rheol. J. 24, 113-120
12. Iijima, S., 1991, Helical microtubules of graphitic carbon, Nature 354, 56-58
13. Iyer, S., A. Detwiler, S. Patel, and D.A. Schiraldi, 2006, Control of coefficient of thermal expansion in elastomers using boron nitride, J. Appl. Polym. Sci. 102, 5153-5161
14. Kang, M.H. and S.J. Lee, 2012, Rheological and electrical properties of polystyrene/multi-walled carbon nanotube nanocomposites prepared by latex technology, Korea-Aust. Rheol. J. 24, 97-103
15. Kim, B.C. and S.J. Lee, 2008, Silicate dispersion and rheological properties of high impact polystyrene/organoclay nanocomposites via in situ polymerization, Korea-Aust. Rheol. J. 20, 227-233
16. Kim, J.H. and Y.M. Lee, 2001, Gas permeation properties of poly(amide-6-b-ethylene oxide)-silica hybrid membranes, J. Memebrane. Sci. 193, 209-225
17. Liu, L., Z. Qi, and X. Zhu, 1999, Studies on nylon 6/clay nanocomposites by melt-intercalation process, J. Appl. Polym. Sci. 71, 1133-1138
18. Lyons, J.G., J.E. Kennedy, S. Lordan, L.M. Geever, and C.L. Higginbotham, 2010, Characterisation of the effects of a titanium micro particle filler on a polyether-block-amide host matrix, J. Mater. Sci. 45, 3204-3214
19. Manchado, M.A.L., L. Valentini, J. Biagiotti, and J.M. Kenny, Thermal and mechanical properties of single-walled carbon nanotubes-polypropylene composites prepared by melt processing, Carbon 43, 1499-1505
20. Markarian, J., 2008, Thermoplastic elastomer compounds continue upward trend, Plast. Addit. Compound. 10, 38-40, 42-43
21. Moniruzzaman, M. and K.I. Winey, 2006, Polymer nanocomposites containing carbon nanotubes, Macromolecules 39, 5194-5205
22. Murali, R.S., S. Sridhar, T. Sankarshana, and Y.V.L. Ravikumar, 2010, Gas permeation behavior of Pebax-1657 nanocomposite membrane incorporated with multiwalled carbon nanotubes, Ind. Eng. Chem. Res. 49, 6530-6538
23. Oh, J.S., K.H. Ahn, and J.S. Hong, 2010, Dispersion of entangled carbon nanotube by melt extrusion, Korea-Aust. Rheol. J. 22, 89-94
24. Rader, C.P. and R.F. Stockel, 1995, Polymer recycling: an overview, Plastics, Rubber, and Paper Recycling, ACS Symposium Series 609, 2-10
25. Spontak, R.J. and N.P. Patel, 2000, Thermoplastic elastomers: fundamentals and applications, Curr Opin. Colloid. In. 5, 333-340
26. Woo, D.K., B.C. Kim, and S.J. Lee, 2009, Preparation and rheological behavior of polystyrene/multi-walled carbon nanotube composites by latex technology, Korea-Aust. Rheol. J. 21, 185-191
27. Yang, I.K. and P.H. Tsai, 2006, Intercalation and viscoelasticity of poly(ether-block-amide) copolymer/montmorillonite nanocomposites: Effect of surfactant, Polymer 47, 5131-5140
28. Yen, H.W., Z.H. Chen, and I.K. Yang, 2012, Use of the composite membrane of poly(ether-block-amide) and carbon nanotubes (CNTs) in a pervaporation system incorporated with fermentation for butanol production by Clostridium acetobutylicum, Bioresource. Technol. 109, 105-109.