Titania-added Ce 0.6 la 0.4 O 2-δ for the buffer layer of high-performance solid oxide fuel cells using doped lanthanum gallate electrolyte film

Journal of the American Ceramic Society

Volumn 95, Issue 11, 2012, Pages 3588-3596

  Hong, Jong Eun ^a   Inagaki, Toru ^b   Ida, Shintaro ^a   Ishihara, Tatsumi ^a,b  

^a KYUSHU UNIVERSITY   (Japan)

^b KANSAI ELECTRIC POWER CO   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CO-FIRING; DOPED LANTHANUM GALLATE; ELECTRICAL CONDUCTIVITY; ELECTROLYTE FILMS; ELECTRON-HOLE CONDUCTION; FAST SINTERING; HEATING/COOLING RATE; HOLDING TIME; LOW SINTERING TEMPERATURE; LSGM ELECTROLYTE; MG-DOPING; OHMIC RESISTANCE; POWER DENSITIES; SINTERING ADDITIVES; SINTERING DENSITY; SINTERING TEMPERATURES; TI ADDITION; TIO; ZNO;

BUFFER LAYERS; CERIUM COMPOUNDS; DEFECT DENSITY; DIFFUSION; ELECTRIC CONDUCTIVITY; ELECTROLYTES; LANTHANUM; LANTHANUM ALLOYS; OHMIC CONTACTS; OPEN CIRCUIT VOLTAGE; RUTHENIUM COMPOUNDS; SILVER; SILVER OXIDES; TITANIUM DIOXIDE; ZINC OXIDE;

SINTERING;

EID: 84868472153     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2012.05364.x     Document Type: Article

References (38)

1. 3 Perovskite Type Oxide," Solid State Ionics, 113-115, 585-91 (1998).
2. 3 Perovskite Oxide and Application for the Electrolyte of Solid Oxide Fuel Cells," J. Mater. Sci., 36, 1125-31 (2001).
3. 3-Based Oxide," Solid State Ionics, 175, 319-22 (2004).
4. K. Huang, J. H. Wan, and, J. B. Goodenough, " Increasing Power Density of LSGM-Based Solid Oxide Fuel Cells Using New Anode Materials," J. Electrochem. Soc., 148, A788-94 (2001).
5. H. Yahiro, T. Ohuchi, K. Eguchi, and, H. Arai, " Electrical Properties and Microstructure in the System Ceria-Alkaline Earth Oxide," J. Mater. Sci., 23, 1036-41 (1988).
6. H. Yoshida, H. Deguchi, K. Miura, M. Horiuchi, and, T. Inagaki, " Investigation of the Relationship Between the Ionic Conductivity and the Local Structures of Singly and Doubly Doped Ceria Compounds Using EXAFS Measurement," Solid State Ionics, 140, 191-9 (2001).
7. 2-Based Systems," Solid State Ionics, 154-155, 461-6 (2002).
8. 2-δ Ceramics (Ln = Y, La, Gd, Sm) with and without Co-Doping," Electrochim. Acta, 51, 6463-9 (2006).
9. 2 Based Materials Doped with Lanthanides for Applications in Intermediate Temperature Electrochemical Devices," Int. J. Hydrogen Energ., 36,s 6175-83 (2011).
10. 2 System," J. Electrochem. Soc., 150, A665-73 (2003).
11. 3 System at 1100-1500°C," J. Eur. Ceram. Soc., 31, 1277-83 (2011).
12. 3 Cathode," J. Power Sources, 161, 34-9 (2006).
13. J. W. Yan, Z. G. Lu, Y. Jiang, Y. L. Dong, C. Y. Yu, and, W. Z. Li, " Fabrication and Testing of a Doped Lanthanum Gallate Electrolyte Thin-Film Solid Oxide Fuel Cell," J. Electrochem. Soc., 149, A1132-5 (2002).
14. 3-δ Electrolytes," Electrochem. Solid-State Lett., 9, A285-8 (2006).
15. T. He, Q. He, L. Pei, and, Y. Ji, " Doped Lanthanum Gallate Film Solid Oxide Fuel Cells Fabricated On a Ni/YSZ Anode Support," J. Am. Ceram. Soc., 89, 2664-7 (2006).
16. D. Y. Lee, J. H. Han, E. G. Kim, R. H. Song, and, D. R. Shin, " Performance of Strontium- and Magnesium-Doped Lanthanum Gallate Electrolyte with Lanthanum-Doped Ceria as a Buffer Layer for IT-SOFCs," J. Power Sources, 185, 207-11 (2008).
17. W. Guo, J. Liu, and, Y. Zhang, " Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte," Electrochim. Acta, 53, 4420-7 (2008).
18. 3 Film Prepared by Screen Printing Process," J. Solid State Electrochem., 16, 1493-502 (2012).
19. 1.9 Cermet Anode Support," Int. J. Hydrogen Energ., 36, 14632-42 (2011).
20. 2-δComposite Film," Electrochem. Solid-State Lett., 8, A389-91 (2005).
21. 3 Based Electrolyte Film," Electrochim. Acta, 52, 1645-50 (2006).
22. 3 Based Electrolyte Film with High Power Density," J. Power Sources, 195, 6294-300 (2010).
23. 3," J. Electrochem. Soc., 144, 3620-4 (1997).
24. M. Hrovat, A. Ahmad-Khanlou, Z. Samardzija, and, J. Holc, " Interactions Between Lanthanum Gallate Based Solid Electrolyte and Ceria," Mater. Res. Bull., 34, 2027-34 (1999).
25. Y.-M. Chiang, D. Birnie III, and, W. D. Kingery, " Physical Ceramics, Principles for Ceramics and Engineering "; pp. 351-428 in MIT Series in Material Science and Engineering, Ch. 5, Edited by, C. Robichaud, and, K. Santor,. John Wiley and Sons, New York, NJ, 1996.
26. R. J. Brook, " Fabrication Principles for the Production of Ceramics with Superior Mechanical Properties," Proc. Brit. Ceram. Soc., 32, 7-24 (1982).
27. V. Esposito, and, E. Traveras, " Design of Electroceramics for Solid Oxide Fuel Cell Applications: Playing with Ceria," J. Am. Ceram. Soc., 91, 1037-51 (2008).
28. C. Herring, " Effect of Change of Scale on Sintering Phenomena," J. Appl. Phys., 21, 301-3 (1950).
29. D. Pérez-Coll, E. Sánchez-Lõpez, and, G. G. Mather, " Influence of Porosity on the Bulk and Grain-Boundary Electrical Properties of Gd-Doped Ceria," Solid State Ionics, 181, 1033-42 (2010).
30. J. Hugo, and, S. Kim, " The Effect of Segregated Transition Metal Ions on the Grain Boundary Resistivity of Gadolinium Doped Ceria: Alteration of the Space Charge Potential," Solid State Ionics, 177, 3075-80 (2006).
31. 1.9 Ceramics (Ln = Y, Sm, Gd)," J. Power Sources, 196, 6131-7 (2011).
32. 2 Systems Prepared by the Pechini Process," Solid State Ionics, 154-155, 581-8 (2002).
33. 2," J. Am. Ceram. Soc., 77, 2289-97 (1994).
34. 2: Dopant Effects, Defect Mechanism, and Solute Drag," J. Am. Ceram. Soc., 79, 1793-800 (1996).
35. 2-δ (M = Ca, Sr) System," Electrochemistry, 68, 455-9 (2000).
36. W. M. O'neill, and, M. A. Morris, " The Defect Chemistry of Lanthana-Ceria Mixed Oxides by MASNMR," Chem. Phys. Lett., 305, 389-94 (1999).
37. S. J. Hong, and, A. V. Virkar, " Lattice Parameters and Densities of Rare Earth Oxide Doped Ceria Electrolytes," J. Am. Ceram. Soc., 78, 433-9 (1995).
38. P. Huang, A. Horky, and, A. Petric, " Interfacial Reaction Between Nickel Oxide and Lanthanum Gallate During Sintering and its Effect on Conductivity," J. Am. Ceram. Soc., 82, 2402-6 (1999).