Preparation of modified semi-coke-supported ZnFe2O4 sorbent with the assistance of ultrasonic irradiation

Environmental Engineering Science

Volumn 29, Issue 11, 2012, Pages 1026-1031

  Mi, Jie ^a   Ren, Jun ^a   Zhang, Yongyan ^a  

^a TAIYUAN UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

hydrogen sulfide; modified semi coke; ultrasonic; zinc ferrites

Indexed keywords

CALCINATION TEMPERATURE; FIXED-BED REACTORS; HOT GAS; MASS RATIO; SEMI-COKE; SULFUR CAPACITY; ULTRASONIC IRRADIATION; ULTRASONIC POWER; ZINC FERRITE;

CALCINATION; CHEMICAL REACTORS; HYDROGEN SULFIDE; IRRADIATION; SORPTION; SULFUR; ULTRASONICS;

SORBENTS;

COAL; COKE; HYDROGEN SULFIDE; MODIFIED SEMI COKE; SULFUR; UNCLASSIFIED DRUG; ZINC COMPLEX; ZINC FERRITE;

ADSORPTION; ARTICLE; CATALYST; DESULFURIZATION; GAS; HEATING; IRRADIATION; MATERIALS; OXIDATION; PHYSICAL PARAMETERS; ULTRASOUND; X RAY POWDER DIFFRACTION;

EID: 84868331321     PISSN: 10928758     EISSN: 15579018     Source Type: Journal    
DOI: 10.1089/ees.2011.0434     Document Type: Article

References (33)

1. Ahmed, M.A, Alonso, L., Palacios, J.M., Cilleruelo, C., and Abanades, J.C. (2000). Structural changes in zinc ferrites as regenerable sorbents for hot coal gas desulfurization. Solid State Ionics 138, 51.
2. Akyurtlu, J.F., and Akyurtlu, A.(1995). Hot gas desulfurization with vanadium-promoted zinc ferrite sorbents. Gas. Sep. Purif. 9, 17.
3. Bandosz, T.J. (1999). Effect of pore structure and surface chemistry of virgin activated carbons on removal of hydrogen sulfide. Carbon 37, 483.
4. Ben-Slimane, R., and Abbasian, J. (2000). Regenerable mixed metal oxide sorbents for coal gas desulfurization at moderate temperatures. Adv. Env. Res. 4, 147.
5. Ben-Slimane, R., and Hepworth, M.T. (1995). Desulfurization of hot coal-derived fuel gases with manganese-based regenerable sorbents. 3. Fixed-bed testing. Energy Fuels 9, 372.
6. Bu, X.P., Ying, Y.J., Zhang, C.Q., and Peng, W.W. (2008). Research improvement in Zn-based sorbent for hot gas desulfurization. Powder Technol. 180, 253.
7. Cal, M.P., Strickler B.W., and Lizzio A.A. (2000a). High temperature hydrogen sulfide adsorption on activated carbon. I. Effects of gas composition and metal addition. Carbon 38, 1757.
8. Cal, M.P., Strickler B.W., and Lizzio A.A. (2000b). High temperature hydrogen sulfide adsorption on activated carbon. II. Effects of gas temperature, gas pressure and sorbent regeneration. Carbon 38, 1767.
9. U.S. Environmental Protection Agency (EPA). (1999). Control of air pollution from new motor vehicles: Proposed tier 2 motor vehicle emissions standards and gasoline sulfur control requirements. EPA, 40CFR, Parts 80, 85 and 86, AMSFRL: 6337- 3, RIN 2060-A123; Federal Register/Vol. 64, No.92/Thursday, 13 May 1999.
10. Ikenaga, N., Chiyoda, N., Matsushima, H., and Suzuki. T. (2002). Preparation of activated carbon-supported ferrite for absorbent of hydrogen sulfide at a low temperature. Fuel 81, 1569.
11. Ikenaga, N., Chiyoda, N., Matsushima, H., and Suzuki. T. (2004). Preparation of zinc ferrite in the presence of carbon material and its application to hot-gas cleaning. Fuel 83, 661.
12. Ikenaga, N., Ohgaito, Y., and Suzuki, T. (2005). H2S absorption behavior of calcium ferrites prepared in the presence of coal. Energy Fuels 19, 170.
13. Jiang, L.Y., Zhou, S.X., and Wang, W.C. (2008). Adsorption of formaldehyde by activated carbon loaded with manganese oxides. Acta Sci. Circum. 28, 337.
14. Jin, Q.H. (1999). Microwave Chemistry. Beijing: Science Press.
15. Jothimurugesan, K., and Gangwal S.K. (1998). Regeneration of zinc titanate H2S sorbents. Ind. Eng. Chem. Res. 37, 1929.
16. Lew, S., Sarofim, A.F., and Flytzani-Stephanopoulos, M. (1992a). Modeling of the sulfidation of zinc-titanium oxide sorbents with hydrogen sulfide. AIChE J. 38, 1161.
17. Lew, S., Sarofim, A.F., and Flytzani-Stephanopoulos, M. (1992b). The reduction of zinc titanate and zinc oxide solids. Chem. Eng. Sci. 47, 1421.
18. Mikkola, J.P., and Salmi, T. (2001). Three-phase catalytic hydrogenation of xylose to xylitol - Prolonging the catalyst activity by means of on-line ultrasonic treatment. Catal. Today 64, 271.
19. Nguyen-Thanh, D., and Bandosz, T.J. (2005). Activated carbons with metal containing bentonite binders as adsorbents of hydrogen sulfide. Carbon 43, 359.
20. Ohtsuka, Y., Tsubouchi, N., Kikuchi T., and Hashimoto, H. (2009). Recent progress in Japan on hot gas cleanup of hydrogen chloride, hydrogen sulfide and ammonia in coalderived fuel gas. Powder Technol. 190, 340.
21. Pineda, M., Fierro, J.G., Palaciso, J., Cilleruelo, C., Garcia, E., and Ibarra, J. (1997). Characterization of zinc oxide and zinc ferrite doped with Ti or Cu as sorbents for hot gas desulphurization. Appl. Surf. Sci. 119, 1.
22. Pineda, M., Palacios, J.M., Alonso, L., Garcia, E., and Moliner, R. (2000). Performance of zinc oxide based sorbents for hot coal gas desulfurization in multicycle tests in a fixed-bed reactor. Fuel 79, 885.
23. Sasaoka, E., Hirano, S., Kasaoka, S., and Sakata, Y. (1994). Stability of zinc oxide high-temperature desulfurization sorbents for reduction. Energy Fuels 8, 763.
24. Sasaoka, E., Sakamoto, M., Ichio, T., Kasaoka, S., and Sakata, Y (1993). Reactivity and durability of iron oxide high temperature desulfurization sorbents. Energy Fuels 7, 632.
25. Shangguan, J. Li, Z.L., Yang, Z., Fan, H.L., Shen, F., and Miao, M.Q. (2005). The effect of heating semi-coke at high temperature on its SO2 removal capacity. Taiyuan Univ. Tech. 36, 134.
26. Stirling, D. (2000). The Sulfur Problem: Cleaning Up Industrial Feed-Stocks. Cambridge, United Kingdom: Royal Society of Chemistry.
27. Westmoreland, P.R., and Harrison, D.P. (1976). Evaluation of candidate solids for high-temperature desulfurization of low- BTU gases. Environ. Sci. Technol. 10, 659.
28. Xie, W., Chang, L.P., Wang, D.H., Xie, K.C., Terry, W., and Yu, J.L. (2010). Removal of sulfur at high temperatures using iron-based sorbents supported on fine coal ash. Fuel 89, 868.
29. Xie, W., Chang, L., Xie, K., Terry, W., and Yu, J. (2007) Two-step hot coal gas desulphurization process integrated with direct production of elemental sulfur using iron-based sorbents: A preliminary study. Presented at the 24th International Pittsburgh Coal Conference, Johannesburg, South Africa, September 10-14.
30. Xu, H., Liang, M., Li, C., and Wang, Y. (2004). Sulfidation and regeneration performance of sorbents for hot coal gas desulphurization. Proc. Chinese Soc. Electr. Eng. 24, 198.
31. Yan, G., Huo, C., and Liu, H.Z. (2007). Application of ultrasonic technologies in catalytic chemistry. Ind. Catal. 15, 1.
32. Yasyerli, S. (2008). Cerium-manganese mixed oxides for high temperature H2S removal and activity comparisons with V- Mn, Zn-Mn, Fe-Mn sorbents. Chem. Eng. Process. 47, 577.
33. Yu, J., Chang, L., Xie, W., Song, H., and Xie, K. (2006). A study on the ash from coal gangue fired power plantcharacteristics and application. Presented at the 23rd Annual International Pittsburgh Coal Conference, Pittsburgh, PA, September 25-28.