Effect of additives on the morphology and properties of poly(vinylidene fluoride) blend hollow fiber membrane prepared by the thermally induced phase separation method

Journal of Membrane Science

Volumn 423-424, Issue , 2012, Pages 189-194

  Rajabzadeh, Saeid ^a   Liang, Cui ^a   Ohmukai, Yoshikage ^a   Maruyama, Tatsuo ^a   Matsuyama, Hideto ^a  

^a KOBE UNIVERSITY   (Japan)

Author keywords

Blend hollow fiber membrane; Poly(methyl methacrylate); Poly(vinylidene fluoride); Poly(vinylpyrrolidone); Thermally induced phase separation

Indexed keywords

ASYMMETRIC STRUCTURES; BLEND MEMBRANES; FOULING RESISTANCE; HOLLOW FIBER MEMBRANES; MAXIMUM STRESS; OUTER SURFACE; POLY(VINYL PYRROLIDONE); POLY(VINYLIDENE FLUORIDE); POLYVINYLIDENE FLUORIDES; PVDF MEMBRANE; SKIN LAYER; THERMALLY INDUCED PHASE SEPARATION; WATER CONTACT ANGLE;

CONTACT ANGLE; ESTERS; MICROFILTRATION; PHASE SEPARATION;

MEMBRANES;

POLY(METHYL METHACRYLATE); POLYVINYLIDENE FLUORIDE; POVIDONE IODINE;

ARTICLE; BIOFOULING; CONTACT ANGLE; FILTRATION; HEAT TREATMENT; HOLLOW FIBER MEMBRANE; HYDROPHILICITY; MEASUREMENT; MEMBRANE STRUCTURE; MEMBRANE TRANSPORT; MORPHOLOGY; OUTER MEMBRANE; PHASE SEPARATION; PRIORITY JOURNAL; STRESS; TENSILE STRENGTH;

EID: 84867747503     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2012.08.013     Document Type: Article

References (31)

1. Calabrese E.J., Gilbert C.E., Pastides H. Safe Drinking Water Act Amendments, Regulation and Standards 1989, Lewis Publishers, Michigan.
2. Dohany J.E., Robb L.E. Polyvinylidene fluoride. Encyclopedia of Chemical Technology 1980, vol. 11. Wiley, New York, NY. third ed.
3. Guell C., Davis R.H. Membrane fouling during microfiltration of protein mixtures. J. Membr. Sci. 1996, 119:269.
4. Khayet M., Feng C.Y., Khulbe K.C., Matsuura T. Preparation and characterization of polyvinylidene fluoride hollow fiber membranes for ultrafiltration. Polymer 2002, 43:3879.
5. Madaeni S.S., Yeganeh M.K. Microfiltration of emulsified oil wastewater. J. Porous Mater. 2003, 10:131-138.
6. Schneider K., Van Gassel T.S. Membrane distillation. Chem. Eng. Technol. 1984, 56:514.
7. Khayet M., Khulbe K.C., Matsuura T. Characterization of membranes for membrane distillation by atomic force microscopy and estimation of their water vapor transfer coefficients in vacuum membrane distillation process. J. Membr. Sci. 2004, 238:199-211.
8. Bonyadi S., Chung T.S. Flux enhancement in membrane distillation by fabrication of dual layer hydrophilic-hydrophobic hollow fiber membranes. J. Membr. Sci. 2007, 306:134.
9. Wang K.Y., Chung T.S., Gryta M. Hydrophobic PVDF hollow fiber membranes with narrow pore size distribution and ultra-thin skin for the fresh water production through membrane distillation. Chem. Eng. Sci. 2008, 63:2587.
10. Jian K., Pintauro P.N. Asymmetric PVDF hollow-fiber membranes for organic/water prevaporation separations. J. Membr. Sci. 1997, 135:41.
11. Li K., Kong J.F., Wang D., Teo W.K. Tailor-made asymmetric PVDF hollow fibers for soluble gas removal. AlChE J. 1999, 45:1211.
12. Atchariyawut S., Feng C., Wang R., Jiraratananon R., Liang D.T. Effect of membrane structure on mass-transfer in the membrane gas-liquid contacting process using microporous PVDF hollow fibers. J. Membr. Sci. 2006, 285:272.
13. Bottino A., Capannelli G., Monticelli O., Piaggio P. Poly(vinylidene fluoride) with improved functionalization for membrane production. J. Membr. Sci. 2000, 166:23-29.
14. Boributh S., Chanachai A., Jiraratananon R. Modification of PVDF membrane by chitosan solution for reducing protein fouling. J. Membr. Sci. 2009, 342(1-2):97-104.
15. Yang X., Wang R., Shi L., Fane A.G., Debowski M. Performance improvement of PVDF hollow fiber-based membrane distillation process. J. Membr. Sci. 2011, 369(1-2):437-447.
16. Kim J.H., Lee K.H. Effect of PEG additive on membrane formation by phase inversion. J. Membr. Sci. 1998, 138:153-163.
17. Masuelli M., Marchese J., Ochoa N.A. SPC/PVDF membranes for emulsified oily wastewater treatment. J. Membr. Sci. 2009, 326(2):688-693.
18. Lang W.Z., Xu Z.L., Yang H., Tong W. Preparation and characterization of PVDF-PFSA blend hollow fiber UF membrane. J. Membr. Sci. 2007, 288:123-131.
19. Yuan Z., Li X.D. Porous PVDF/TPU blends asymmetric hollow fiber membranes prepared with the use of hydrophilic additive PVP (K30). Desalination 2008, 223(1-3):438-447.
20. Ochoa N.A., Masuelli M., Marchese J. Effect of hydrophilicity on fouling of emulsified oil wastewater with PVDF/PMMA membranes. J. Membr. Sci. 2003, 226:203-211.
21. Nunesa S.P., Peinemannb K.V. Ultrafiltration membranes from PVDF/PMMA blends. J. Membr. Sci. 1992, 73:25-35.
22. Lina D.J., Changa C.L., Leea C.K., Cheng L.P. Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions. Eur. Polym. J. 2006, 42:2407-2418.
23. Rajabzadeh S., Maruyama T., Ohmukai Y., Sotani T., Matsuyama H. Preparation of PVDF/PMMA blend hollow fiber membrane via thermally induced phase separation (TIPS) method. Sep. Purif. Technol. 2009, 66:76-83.
24. Çulfa P.Z., Wessling M., Lammertin R.G.H. Hollow fiber ultrafiltration membranes with microstructured inner skin. J. Membr. Sci. 2011, 369:221-227.
25. Lv R., Zhou J., Du Q., Wang H., Zhong W. Preparation and characterization of EVOH/PVP membranes via thermally induced phase separation. J. Membr. Sci. 2006, 281:700-706.
26. Shang M., Matsuyama H., Teramoto M., Lloyd D.R., Kubota N. Preparation and membrane performance of poly(ethylene-co-vinyl alcohol) hollow fiber membrane via thermally induced phase separation. Polymer 2003, 44:7441-7447.
27. Fu X., Maruyama T., Sotani T., Matsuyama H. Effect of surface morphology on membrane fouling by humic acid with the use of cellulose acetate butyrate hollow fiber membranes. J. Membr. Sci. 2008, 320:483-491.
28. McGuire K.S., Lloyd D.R., Lim G.B.A. Microporous membrane formation via thermally-induced phase separation. VII. Effect of dilution, cooling rate, and nucleating agent addition on morphology. J. Membr. Sci. 1993, 79:27-34.
29. Bottino A., Capannelli G., Munari S., Turturro A. Solubility parameters of poly(vinylidene fluoride). J. Polym. Sci. Polym. Phys. 1988, 26:785-794.
30. Hancock B.C., York P., Rowe R.C. The use of solubility parameters in pharmaceutical dosage form design. Int. J. Pharm. 1997, 148:1-21.
31. Vandenburg H.J., Clifford A.A., Bartle K.D., Carlson R.E., Carroll J., Newton I.D. A simple solvent selection method for accelerated solvent extraction of additives from polymers. Analyst 1999, 124:1707-1710.