Processing science of advanced thermal-barrier systems

MRS Bulletin

Volumn 37, Issue 10, 2012, Pages 903-910

  Sampath, Sanjay ^a   Schulz, Uwe ^b   Jarligo, Maria Ophelia ^c   Kuroda, Seiji ^d  

^a Stony Brook University   (United States)

^b GERMAN AEROSPACE CENTER DLR   (Germany)

^c FORSCHUNGSZENTRUM JÜLICH   (Germany)

^d NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

Author keywords

Coating; physical vapor deposition; porosity; spray deposition; thermal conductivity

Indexed keywords

ADVANCED DESIGNS; AERO-ENGINE COMPONENTS; ATMOSPHERIC PLASMA SPRAY; CONTEMPORARY MANUFACTURING; DEPOSITION TECHNOLOGY; ELECTRON BEAM-PHYSICAL VAPOR DEPOSITION; FABRICATION TECHNOLOGIES; HIGH THROUGHPUT; IN-PROCESS CONTROL; LARGE POWER; LOW COSTS; LOW THERMAL CONDUCTIVITY; MATERIALS MANUFACTURING; PLASMA TECHNOLOGY; PRIMARY ENERGY SOURCE; PROPULSION ENGINE; REFRACTORY CERAMICS; ROTATING BLADES; SPRAY DEPOSITION; SUSPENSION SPRAY; THERMAL PLASMA;

COATINGS; DESIGN; ELECTRON BEAMS; ENERGY EFFICIENCY; MANUFACTURE; PHYSICAL VAPOR DEPOSITION; PLASMA JETS; PLASMA SPRAYING; POROSITY; THERMAL CONDUCTIVITY; THICK FILMS; TURBINES; VAPORS; ZIRCONIA;

THERMAL BARRIER COATINGS;

EID: 84867387634     PISSN: 08837694     EISSN: None     Source Type: Journal    
DOI: 10.1557/mrs.2012.233     Document Type: Article

References (38)

1. A. Kulkarni, Z. Wang, T. Nakamura, S. Sampath, A. Goland, H. Herman, J. Allen, J. Ilavsky, G. Long, J. Frahm, R.W. Steinbrech, Acta Mater. 51, 2457 (2003).
2. A. Flores Renteria, B. Saruhan, U. Schulz, H.-J. Raetzer-Scheibe, J. Haug, A. Wiedenmann, Surf. Coat. Technol. 201, 2611 (2006).
3. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, F.S. Pettit, Prog. Mater. Sci.46 (5) 505 (2001).
4. Y.Liu, T. Nakamura, G. Dwivedi, A. Valarezo, S. Sampath, J. Am. Ceram. Soc. 91 (12), 4036 (2008).
5. Y.Liu, T. Nakamura, V. Srinivasan, A. Vaidya, A. Gouldstone, S. Sampath Acta Mater. 55,4667 (2007).
6. C.A. Johnson, J.A. Ruud, R. Bruce, D. Wortman, Surf. Coat. Technol. 108 80 (1998).
7. T.A. Taylor, US Patent 5, 073, 433 (1989).
8. D.M. Gray, Y.C. Lau, C.A. Johnson, M.P. Boron, W.A. Nelson, US Patent 5,830,586 (1996).
9. P. Fauchais, G. Montavon, J. Therm. Spray Technol. 19 (1-2), 226 (2010)
10. D.D. Hass, H.N.G. Wadley, US Patent Appl. 2008/0131611 A1 (2008).
11. K. Von Niessen, M. Gindrat, J. Therm. Spray Technol. 20 (4), 736 (2011).
12. U. Schulz, B. Saruhan, K. Fritscher, C. Leyens, Int. J. Appl. Ceram. Technol. 1,302 (2004).
13. A. Flores Renteria, B. Saruhan, J. Ilavsky, A.J. Allen, Surf. Coat Tech. 201 (8)4781 (2007).
14. U. Schulz, S.G. Terry, C.G. Levi, Mater. Sci. Eng. A360,319 (2003).
15. A. Vaidya, V. Srinivasan, T. Streibl, M. Friis, W. Chi, S. Sampath, Mater. Sci. Eng., A497, 239 (2008).
16. S. Kuroda, T.W. Clyne, Thin Solid Films200 (1), 49 (1991).
17. T. Nakamura, Y. Liu, Int. J. Solids Struct. 44 (6), 1990 (2007).
18. W. Chi, S. Sampath, H. Wang, J. Am. Ceram. Soc. 91 (8), 2636 (2008).
19. G. Dwivedi,T. Nakamura, S. Sampath, J. Am. Ceram. Soc. 94,104 (2011).
20. H.B. Guo, H. Murakami, S. Kuroda, Mater. Trans. 47 (42), 308 (2006).
21. H.B. Guo, R. Vaßen, D. Stöver, Surf. Coat Technol. 186 (3), 353 (2004).
22. K. Ito, H. Kuriki, M. Watanabe, S. Kuroda, M. Enoki, Mater. Trans. 53, 671 (2012).
23. A. Kulkarni, A. Goland, H. Herman, A. Allen, J. Ilavsky, G. Long, C. Johnson, J. Ruud, J. Am. Ceram. Soc. 87 (7), 1294 (2004).
24. J. Karthikeyan, C.C. Berndt, J. Tikkanen, S. Reddy, H. Herman, Mater. Sci. Eng., A238 (2), 275 (1997).
25. T. Bhatia, A. Ozturk, L. Xie, E. Jordan, B. Cetegen, M. Gell, X. Ma, N. Padture J. Mater. Res. 17, 2363 (2002).
26. R. Rampon, C. Filiatre, G. Bertrand, J. Therm. Spray Technol. 17 (1), 105 (2008).
27. C. Delbos, J. Fazilleau, V. Rat, J.F. Coudert, P. Fauchais, B. Pateyron Plasma Chem. Plasma Process. 26 (4), 393 (2006).
28. H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, D. Stoever, J. Therm. Spray Technol.17 (1),115 (2008).
29. H. Kaßner, A. Stuke, M. Rödig, R.Vaßen, D. Stöver, Ceramic Engineering and Science Proceedings29 (4) 147 (2009).
30. A. Guignard, G. Mauer, R. Vaßen, D. Stöver, J. Therm. Spray Technol. 21 416 (2012).
31. A. Guignard, doctoral thesis, Ruhr University, Bochum, Germany (2012).
32. A. Hospach, G. Mauer, R. Vassen, D. Stover, J. Therm. Spray Technol. 20 (1-2), 116 (2011).
33. D. Zhu, R. Miller, Int. J. Appl. Ceram. Technol. 1, 86 (2004).
34. R. Vassen, X. Cao, F Tietz, D. Basu, D. Stöver, J. Am. Ceram. Soc. 83 (8), 2023 (2000).
35. M. Jarligo, D.E. Mack, R. Vassen, D. Stöver, J. Therm. Spray Technol. 18 (2), 187 (2009).
36. Y Tan, J. Longtin, S. Sampath, H. Wang, J. Am. Ceram. Soc. 92 (3), 710 (2009).
37. R.A. Miller, J.L. Smialek, R.G. Garilick, in Science and Technology of Zirconia I, A.H. Heuer, L.W. Hobbs, Eds. (AmericanCeramicSociety,Columbus, OH, 1981), p. 241.
38. C. Mercer, J.R. Williams, D.R. Clarke, A.G. Evans, Proc. R. Soc.463 (2081), 1393 (2007).