Variant selection during cooling after beta annealing of Ti-6Al-4V ingot material

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 43, Issue 10, 2012, Pages 3570-3585

  Sargent, G A ^a   Kinsel, K T ^b   Pilchak, A L ^c   Salem, A A ^d   Semiatin, S L ^c  

^a UES INC   (United States)

^b Wright State University   (United States)

^c AIR FORCE RESEARCH LABORATORY   (United States)

^d Materials Resources LLC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AS-CAST; BETA-PHASE; COOLING RATES; ELECTRON BACK SCATTER DIFFRACTION; FIBER TEXTURE; MEMORY EFFECTS; SELF-ACCOMMODATION; TI-6AL-4V; VARIANT SELECTION;

COOLING; INGOTS; TITANIUM ALLOYS;

HEAT TREATMENT;

EID: 84867229428     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-012-1245-y     Document Type: Article

References (40)

1. F. Larson and A. Zarkades: "Properties of Textured Titanium Alloys," Report MCIC-74-20, Metals and Ceramics Information Center, Battelle Memorial Institute, Columbus, OH, 1974.
2. G. Luetjering and M. Peters: "Mechanical Properties of a Titanium Blading Alloy," Report EPRI CS-2933, Electric Power Research Institute, Palo Alto, CA, 1983.
3. G. Luetjering: Mater. Sci. Eng. A, 1998, vol. A243, pp. 32-45.
4. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, U.K., 1998.
5. S.L. Semiatin,M.G.Glavicic, S.V. Shevchenko,O.M. Ivasishin,Y.B. Chun, and S.K.Hwang: in ASMHandbook, Vol. 22A: Fundamentals of Modeling for Metals processing, D.U. Furrer and S.L. Semiatin, eds., in ASMInternational, Materials Park, OH, 2009, pp. 536-52.
6. M. Peters and G. Luetjering: in Titanium '80: Science and Technology, H. Kimura and O. Izumi, eds., TMS, Warrendale, PA, 1980, pp. 925-35.
7. J.C. Williams and E.A. Starke, Jr.: in Deformation, Processing, and Structure, G. Krauss, ed., ASM International, Materials Park, OH, 1984, pp. 279-354.
8. Y.B. Chun, S.H. Yu, S.L. Semiatin, and S.K. Hwang: Mater. Sci. Eng. A, 2005, vol. A398, pp. 209-19.
9. Y.B. Chun, S.L. Semiatin, and S.K. Hwang: Acta Mater., 2006, vol. 54, pp. 3673-89.
10. O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Acta Mater., 2003, vol. 51, pp. 1019-34.
11. O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Mater. Sci. Eng. A, 2006, vol. A433, pp. 216-32.
12. W.G. Burgers: Physica, 1934, vol. 1, pp. 561-86.
13. H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 51-59.
14. S.L. Semiatin, P.N. Fagin, M.G. Glavicic, I.M. Sukonnik, and O.M. Ivasishin: Mater. Sci. Eng. A, 2001, vol. A299, pp. 225-34.
15. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1996, vol. A219, pp. 80-88.
16. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1997, vol. A230, pp. 68-74.
17. S.V. Divinski, V.N. Dnieprenko, and O.M. Ivasishin: Mater. Sci. Eng. A, 1998, vol. A243, pp. 201-05.
18. M. Humbert, L. Germaine, N. Gey, P. Bocher, and M. Jahazi: Mater. Sci. Eng. A, 2006, vol. A430, pp. 157-64.
19. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. A392, pp. 403-14.
20. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer, and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679-91.
21. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215-24.
22. I. Lischewski and G. Gottstein: Acta Mater., 2011, vol. 59, pp. 1530-41.
23. A.W. Bowen: Mater. Sci. Eng., 1977, vol. 29, pp. 19-28.
24. I. Lonardelli, N. Gey, H.-R. Wenk, M. Humbert, S.C. Vogel, and L. Lutterotti: Acta Mater., 2007, vol. 55, pp. 5718-27.
25. J. Romero, M. Preuss, and J. Quinta da Fonseca: Acta Mater., 2009, vol. 57, pp. 5501-11.
26. M.R. Daymond, R.A. Holt, S. Cai, P. Mosbrucker, and S.C. Vogel: Acta Mater., 2010, vol. 58, pp. 4053-66.
27. M.G. Glavicic, P.A. Kobryn, F. Spadafora, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 8-18.
28. A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley, and R. Kerns: J. Microscopy, 2011, vol. 244 (2), pp. 181-86.
29. A.L. Pilchak, A.R. Shiveley, J.S. Tiley, and D.L. Ballard: J. Microscopy, 2011, vol. 244 (1), pp. 38-44.
30. M. Humbert, H. Moustahfid, F. Wagner, and M.J. Philippe: Mater. Sci. Forum, 1994, vol. 157, pp. 1225-30.
31. M. Humbert, F. Wagner, H. Moustahfid, and C. Esling: J. Appl. Cryst., 1995, vol. 28, pp. 571-76.
32. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 50-59.
33. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A351, pp. 258-64.
34. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 773-94.
35. A. Kelly, G.W. Groves, and P. Kidd: Crystallography and Crystal Defects, Wiley, West Sussex, U.K., 2000.
36. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, Germany, 2003.
37. J.W. Elmer, T.A. Palmer, S.S. Babu, and E.D. Specht: Mater. Sci. Eng. A, 2005, vol. A391, pp. 104-13.
38. S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Metall. Mater., 1996, vol. 44, pp. 1979-86.
39. S.C. Wang, M. Aindow, and M.J. Starink: Acta Mater., 2003, vol. 51, pp. 2485-503.
40. Y. Wang, N. Ma, Q. Chen, F. Zang, S.-L. Chen, and Y.A. Chang: JOM, 2005, vol. 57 (9), pp. 32-39.