Common-mode voltage reduction methods for current-source converters in medium-voltage drives

IEEE Transactions on Power Electronics

Volumn 28, Issue 2, 2013, Pages 995-1006

  Zhu, Ning ^a   Xu, David ^a   Wu, Bin ^a   Zargari, Navid R ^b   Kazerani, Mehrdad ^c   Liu, Fangrui ^a  

^a RYERSON UNIVERSITY   (Canada)

^b ROCKWELL AUTOMATION   (Canada)

^c UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Active zero state (AZS) modulation; common mode voltage (CMV); current source converter (CSC); nearest three state (NTS) modulation; nonzero state (NZS) modulation

Indexed keywords

COMMON MODE VOLTAGE; CURRENT SOURCES; DC-LINK; HARMONIC PERFORMANCE; HIGH INPUT POWER; LINEAR MODULATIONS; LOW ORDER HARMONICS; MEDIUM VOLTAGE; MEDIUM VOLTAGE DRIVES; MODULATION METHODS; MODULATION TECHNIQUES; MOTOR DRIVE; MOTOR INSULATION; OPERATING CONDITION; PREMATURE FAILURES; REDUCTION EFFECTS; VOLTAGE-SOURCE CONVERTER;

ELECTRIC DRIVES; ELECTRIC POWER FACTOR; FREQUENCY MODULATION; VECTOR SPACES;

ELECTRIC INVERTERS;

EID: 84867049664     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2012.2201174     Document Type: Article

References (34)

1. J. Guzman, J. Espinoza, L. Moran, and G. Joos, "Selective harmonic elimination in multimodule three-phase current-source converters," IEEE Trans. Power Electron., vol. 25, no. 1, pp. 44-53, Jan. 2010.
2. B. Wu, High-Power Converters and AC Drives. Piscataway, NJ: IEEE Press, 2006.
3. S. Wei, N. R. Zargari, B. Wu, and S. C. Rizzo, "Comparison and mitigation of common mode voltage in power converter topologies," in Proc. 39th Ind. Appl. Soc. Annu. Meet. Ind. Appl. Conf., Seattle, WA, Oct. 3-7, 2004, vol. 3, pp. 1852-1857.
4. J. Rodriguez, L. Moran, J. Pontt, R. Osorio, and S. Kouro, "Modeling and analysis of common-mode voltages generated in medium voltage PWM-CSI drives," IEEE Trans. Power Electron., vol. 18, no. 3, pp. 873-879, May 2003.
5. B. Wu andF.A.DeWinter, "Voltage stress oninduction motors inmedium-voltage (2300-6900-V) PWM GTO CSI drives," IEEE Trans. Power Electron., vol. 12, no. 2, pp. 213-220, Mar. 1997.
6. N. K. Medora and A. Kusko, "Voltage stress on 8000 HP induction motor duetoGTOcurrent source inverter-case study," inProc. IEEE 36th Annu. Conf. Ind. Electron., Phoenix, AZ, Nov. 7-10, 2010, pp. 2479-2484.
7. E. Al-Nabi, B. Wu, and N. R. Zargari, "Input power factor compensation for high-power CSC fed PMSM drive using d-axis stator current control," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 752-761, Feb. 2012.
8. J. R. Espinoza, G. Joos, J. I. Guzman, L. A. Moran, and R. Burgos, "Selective harmonic elimination and current/voltage control in current/voltage-source topologies: A unified approach," IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 71-81, Feb. 2001.
9. Y. Li, M. Pande, N. Zargari, and B. Wu, "Power-factor compensation for PWM CSR-CSI-fed high-power drive system using flux adjustment," IEEE Trans. Power Electron., vol. 24, no. 12, pp. 3014-3019, Dec. 2009.
10. Z. Wang, B. Wu, D. Xu, and N. Zargari, "Hybrid PWM for high-power current-source-inverter-fed drives with low switching frequency," IEEE Trans. Power Electron., vol. 26, no. 6, pp. 1754-1764, Jun. 2011.
11. Y. Li, B. Wu, D. Xu, and N. R. Zargari, "Space vector sequence investigation and synchronization methods for active front-end rectifiers in high-power current-source drives," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1022-1034, Mar. 2008.
12. J. Dai, D. Xu, and B. Wu, "A novel control scheme for current-source-converter-based PWSG wind energy conversion systems," IEEE Trans. Power Electron., vol. 24, no. 4, pp. 963-972, Apr. 2009.
13. A. Qiu, Y. Li, B. Wu, D. Xu, N. Zargari, and Y. Liu, "High performance current source inverter fed induction motor drive with minimal harmonic distortion," in Proc. IEEE Power Electron. Spec. Conf., Orlando, FL, Jun. 17-21, 2007, pp. 79-85.
14. Y. Li, "Control and resonance damping of voltage-source and current-source converters with LC filters," IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1511-1521, May 2009.
15. S. A. S. Grogan, D. G. Holmes, and B. P. McGrath, "High-performance voltage regulation of current source inverters," IEEE Trans. Power Electron., vol. 26, no. 9, pp. 2439-2448, Sep. 2011.
16. F. Liu, B. Wu, N. Zargari, and M. Pande, "An active damping method using inductor-current feedback control for high-power PWM current-source rectifier," IEEE Trans. Power Electron., vol. 26, no. 9, pp. 2580-2587, Sep. 2011.
17. J. D. Ma, B. Wu, N. R. Zargari, and S. C. Rizzo, "A space vector modulated CSI-based ac drive for multimotor applications," IEEE Trans. Power Electron., vol. 16, no. 4, pp. 535-544, Jul. 2001.
18. Y. Li, M. Pande, N. Zargari, and B. Wu, "DC-link current minimization for high-power current-source motor drives," IEEE Trans. Power Electron., vol. 24, no. 1, pp. 232-240, Jan. 2009.
19. Y. Xiao, B. Wu, S. Rizzo, and R. Sotudeh, "A novel power factor control scheme for high-power GTO current-source converter," IEEE Trans. Ind. Appl., vol. 34, no. 6, pp. 1278-1283, Nov./Dec. 1998.
20. Y. Li, M. Pande, N. Zargari, and B. Wu, "An input power factor control strategy for high-power current-source induction motor drive with active front-end," IEEE Trans. Power Electron., vol. 25, no. 2, pp. 352-359, Feb. 2010.
21. J. Espinoza and G. Joos, "Current-source converter on-line pattern generator switching frequency minimization," IEEE Trans. Ind. Electron., vol. 44, no. 2, pp. 198-206, Apr. 1997.
22. L. Lopes and M. Naguib, "Space vector modulation for low switching frequency current source converters with reduced low-order noncharacteristic harmonics," IEEE Trans. Power Electron., vol. 24, no. 4, pp. 903-910, Apr. 2009.
23. B. Wu, S. C. Rizzo, N. R. Zargari, and Y. Xiao, "An integrated DC link choke for elimination of motor common-mode voltage in medium voltage drives," in Proc. 36th Ind. Appl. Soc. Annu. Meet. Ind. Appl. Conf., Chicago, IL, Sep. 30-Oct. 4, 2001, vol. 3, pp. 2022-2027.
24. H. Akagi, H. Hasegawa, and T. Doumoto, "Design and performance of a passive EMI filter for use with a voltage-source PWM inverter having sinusoidal output voltage and zero common-mode voltage," IEEE Trans. Power Electron., vol. 19, no. 4, pp. 1069-1076, Jul. 2004.
25. Y. S. Lai and F. S. Shyu, "Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part I: Basic development," IEEE Trans. Ind. Appl., vol. 40, no. 6, pp. 1605-1612, Nov./Dec. 2004.
26. R. M. Tallam, R. J. Kerkman, D. Leggate, and R. A. Lukaszewski, "Common-mode voltage reduction PWM algorithm for AC drives," IEEE Trans. Ind. Appl., vol. 46, no. 5, pp. 1959-1969, Sep./Oct. 2010.
27. E. Un and A. M. Hava, "A near-state PWM method with reduced switching losses and reduced common-mode voltage for three-phase voltage source inverters," IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 782-793, Mar./Apr. 2009.
28. A. M. Hava and E. Un, "A high performance PWM algorithm for common mode voltage reduction in three-phase voltage source inverters," IEEE Trans. Power Electron., vol. 26, no. 7, pp. 1998-2008, Jul. 2011.
29. A. M. Hava and E. Un, "Performance analysis of reduced common-mode voltage PWM methods and comparison with standard PWM methods for three-phase voltage-source inverters," IEEE Trans. Power Electron., vol. 24, no. 1, pp. 241-252, Jan. 2009.
30. M. Cacciato, A. Consoli, G. Scarcella, G. Scelba, and A. Testa, "Modified space-vector-modulation technique for common mode currents reduction and full utilization of the DC bus," in Proc. IEEE 24th Appl. Power Electron. Conf., Feb. 15-19, 2009, Washington, DC, pp. 109-115.
31. M. Cacciato, A. Consoli, G. Scarcella, and A. Testa, "Reduction of common mode currents in PWM inverter motor drives," IEEE Trans. Ind. Appl., vol. 35, no. 2, pp. 469-476, Mar./Apr. 1999.
32. N. Zhu, B. Wu, D. Xu, N. R. Zargari, and M. Kazerani, "Common-mode voltage reduction methods for medium-voltage current-source inverter-fed drives," in Proc. IEEE 3rd Energy Convers. Congr. Expo., Phoenix, AZ, Sep. 17-22, 2011, pp. 3136-3143.
33. Z. Wang, B. Wu, D. Xu, and N. R. Zargari, "A current-source- converter-based high-power high-speed PMSM drive with 420-Hz switching frequency," IEEE Trans. Ind. Electron., vol. 59, no. 7, pp. 2970-2981, Jul. 2012.
34. H. Akagi and T. Doumoto, "An approach to eliminating high-frequency shaft voltage and ground leakage current from an inverter-driven motor," IEEE Trans. Ind. Appl., vol. 40, no. 4, pp. 1162-1169, Jul./Aug. 2004.