Hybrid polymeric composites reinforced with sisal fibres and silica microparticles

Composites Part B: Engineering

Volumn 43, Issue 8, 2012, Pages 3436-3444

  Da Silva, Leandro José ^a   Panzera, Túlio Hallak ^a   Velloso, Vânia Regina ^a   Christoforo, André Luis ^a   Scarpa, Fabrizio ^b  

^a FEDERAL UNIVERSITY OF SÃO JOÃO DEL REI   (Brazil)

^b UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

A. Lamina ply; B. Mechanical properties; C. Statistical properties methods; D. Electron microscopy

Indexed keywords

A. LAMINA/PLY; APPARENT DENSITY; APPARENT POROSITY; BULK DENSITY; ENGINEERING APPLICATIONS; FLEXURAL MODULUS; FULL FACTORIAL DESIGN; INTERFACE CONDITIONS; INTERFACIAL ADHESIONS; LOW COSTS; MICRO AND NANO-PARTICLE; MICRO-PARTICLES; MICROSTRUCTURE ANALYSIS; POLYMERIC COMPOSITES; POLYMERIC MATRICES; SILICA ADDITIONS; SILICA PARTICLES; SISAL FIBRE; STATISTICAL PROPERTIES/METHODS;

ADHESION; BENDING STRENGTH; ELASTIC MODULI; ELECTRON MICROSCOPY; MALEIC ANHYDRIDE; NATURAL FIBERS; POLYMERS; REINFORCED PLASTICS; REINFORCEMENT; SILICA; SYNTHETIC FIBERS; VOLUME FRACTION;

TENSILE STRENGTH;

EID: 84866729745     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2012.01.026     Document Type: Article

References (28)

1. Silva RV. Compósito de resina poliuretana derivada de óleo de mamona e fibras vegetais. Tese (Doutorado) - Escola de Engenharia de São Carlos, Universidade de São Paulo, São Carlos, 2003, p. 139.
2. D. Nabi Saheb, and J.P. Jog Natural fiber polymer composites: a review Adv Polym Tech 18 4 1999 351 363
3. D. Maldas, and B.V. Kokta Influence of polar monomers on the performance of wood fiber reinforced polystyrene composites. I. Evaluation of critical conditions Int J Polym Mater 14 1990 165 189
4. J.S. Lyons, and M.R. Ahmed Factors affecting the bond between polymer composites and wood J Reinf Plast Compos 24 2005 404 405
5. Kalia S, Kaith BS, Kaur I. Pretreatments of natural fibers and their application as reinforcing material in polymer composites - a review. Polym Eng Sci 2009.
6. N. Sombatsompop, C. Yotinwattanakumtorn, and C. Thongpin Influence of type and concentration of maleic anhydride grafted polypropylene and impact modifiers on mechanical properties of PP/wood sawdust composites J Appl Polym Sci 97 2005 475 484
7. S. Kim, J. Moon, G. Kim, and S. Ha Mechanical properties of polypropylene/natural fiber composites: comparison of wood fiber and cotton fiber Polym Test 27 2008 801 806
8. M. Soleimani, L. Tabil, S. Panigrahi, and A. Opoku The effect of fiber pretreatment and compatibilizer on mechanical and physical properties of flax fiber-polypropylene composites J Environ Polym Degr 16 2008 74 82
9. S. Mishra, J.B. Naik, and Y.P. Patil The compatibilising effect of maleic anhydride on swelling and mechanical properties of plant-fiber-reinforced novolac composites Compos Sci Technol 60 2000 1729 1735
10. J.B. Naik, and S. Mishra Esterification effect of maleic anhydride on swelling properties of natural fiber/high density polyethylene composites J Appl Polym Sci 106 2007 2571 2574
11. M.M.A. López, M. Arroyo, J. Biagiotti, and J.M. Kenny Enhancement of mechanical properties and interfacial adhesion of PP/EPDM/flax fiber composites using maleic anhydride as a compatibilizer J Appl Polym Sci 90 2003 2170 2178
12. T. Mahrholz, J. Stängle, and M. Sinapius Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite moulding processes Compos Part A 40 2009 235 243
13. P. Rosso, L. Ye, K. Friedrich, and S. Sprenger A toughened epoxy resin by silica nanoparticle reinforcement J Appl Polym Sci 100 2006 1849 1855
14. I. Isik, U. Yilmazer, and G. Bayram Impact modified epoxy/montmorillonite nanocomposites: synthesis and characterization Polymer 44 2003 6371 6377
15. A. Yasmin, J.L. Abot, and L.M. Daniel Processing of clay/epoxy nanocomposites by shear mixing Scripta Mater 49 2003 81 86
16. A. Haque, M. Shamsuzzoha, F. Hussain, and D. Dean S2-glass/epoxy polymer nanocomposites: manufacturing, structures, thermal and mechanical properties J Compos Mater 37 20 2003
17. A. Ávila, H.V. Duarte, and M.I. Soares The nanoclay influence on impact response of laminated plates Latin Am J Solids Struct 3 2006 3 20
18. A. Ávila, M.I. Soares, and A.S. Neto A study on nanostructured laminated plates behavior under low-velocity impact loadings Int J Impact Eng 34 2007 28 41
19. A.K. Subramaniyan, and C.T. Sun Enhancing compressive strength of unidirectional polymeric composites using nanoclay Compos Part A 37 2006 2257 2268
20. T. Jia-Lin, and C. Yi-Lieh Investigating silica nanoparticle effect on dynamic and quasi-static compressive strengths of glass fiber/epoxy nanocomposites J Compos Mater 43 25 2009
21. Y. Cao, and J. Cameron Impact properties of silica particle modified glass fiber reinforced epoxy composite J Reinf Plast Compos 25 7 2006
22. J.C. Halpin, and J.L. Kardos The halpin-tsai equations: a review Polym Eng Sci 16 5 1976
23. ASTM D3822-07. Standard Test method for tensile properties of single textile fibers; 2007.
24. ASTM D638 - 03. Standard test method for tensile properties of plastics. 2003.
25. Werkema MCC, Aguiar S. Planejamento e análise de experimentos: como identificar e avaliar as principais variáveis influentes em um processo, Belo Horizonte: Fundação Christiano Ottoni, Escola de Engenharia da UFMG; 1996.
26. BRITISH STANDARD BS2747. Glass fibre reinforced plastics, tensile test. 1998.
27. ASTM D 790 - 07. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. 2007.
28. BRITISH STANDARD BS EN ISO 10545-3. Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density. 1997.