Multi-response optimization of post-fire residual compressive strength of high performance concrete

Construction and Building Materials

Volumn 38, Issue , 2013, Pages 265-273

  Rahim, Abdul ^a   Sharma, U K ^a   Murugesan, K ^a   Sharma, A ^b   Arora, P ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

^b BHABHA ATOMIC RESEARCH CENTRE   (India)

Author keywords

Compressive strength; Elevated temperature; High performance concrete; Optimization; Taguchi method; Utility concept

Indexed keywords

AXIAL COMPRESSIVE LOAD; CEMENT CONTENT; CHEMICAL ADMIXTURE; CONFIRMATION TEST; CONTROL FACTORS; ELEVATED TEMPERATURE; EXPERIMENTAL STUDIES; FINE AGGREGATES; FLY ASH CONTENT; INFLUENCING PARAMETERS; MATERIAL PARAMETER; MULTIRESPONSE OPTIMIZATION; OFF-LINE METHODS; OPTIMIZED PARAMETER; ORTHOGONAL ARRAY; POST-FIRE; RESIDUAL COMPRESSIVE STRENGTH; TAGUCHI; TARGET TEMPERATURE; TEST CONDITION; UTILITY CONCEPT;

AGGREGATES; CEMENTS; COMPRESSIVE STRENGTH; DESIGN OF EXPERIMENTS; FLY ASH; OPTIMIZATION; PLASTICIZERS; TAGUCHI METHODS;

HIGH PERFORMANCE CONCRETE;

EID: 84866710908     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2012.08.048     Document Type: Article

References (38)

1. P.K. Mehta, and P.C. Aitcin Principles underlying the production of high-performance concrete Cem Concr Aggr, ASTM J 12 2 1990 70 78
2. ACI Committee 232-2R-96 Use of fly ash in concrete 2006 American concrete institute Detroit
3. M. Potha Raju, K. Srinivasa Rao, and P.S.N. Raju Compressive strength of heated high-strength concrete Mag Concr Res 59 2 2007 79 85
4. Abrams MS. Compressive strength of concrete at temperatures to 1600 F. Portland cement association. American concrete institute special publication SP-25; 1973.
5. V.K.R. Kodur, and L. Phan Critical factors governing the fire performance of high strength concrete systems Fire Saf J 42 2007 482 488
6. O. Arioz Effects of elevated temperature on properties of concrete Fire Saf J 42 2007 516 522
7. L.T. Phan, and N.J. Carino Review of mechanical properties of HSC at elevated temperature J Mater Civ Eng ASCE 10 1 1998 58 64
8. L.T. Phan, and N.J. Carino Effects of test conditions and mixture proportions on behaviour of high-strength concrete exposed to high temperatures ACI Mater J 99 1 2002 54 66
9. R. Sarshar, and G.A. Khoury Material and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperatures Mag Concr Res 45 162 1993 51 61
10. Y.N. Chan, G.F. Peng, and M. Anson Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures Cem Concr Compos 21 1999 23 27
11. R. Felicetti, and P.G. Gambarova Effects of high temperature on the residual compressive strength of high-strength siliceous concretes ACI Mater J 95 4 1999 395 405
12. Y.N. Chan, X. Luo, and W. Sun Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800°C Cem Concr Res 30 2000 247 251
13. G.A. Khoury Compressive strength of concrete at high strength temperature: a reassessment Mag Concr Res 44 161 1992 291 309
14. C.S. Poon, S. Azhar, M. Anson, and Y.L. Wong Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures Cem Concr Res 31 2001 1291 1300
15. R.V. Balendran, T.M. Rana, T. Maqsood, and W.C. Tang Strength and durability performance of HPC incorporating pozzolans at elevated temperature Struct Surv 20 4 2002 123 128
16. B.H. Bharathkumar, R. Narayanan, B.K. Raguprasad, and D.S. Ramachandramurthy Mix proportions of high performance concrete Cem Concr Compos 23 2001 71 80
17. A.M. Neville Properties of concrete 4th ed. 1995 Pearson Education, Inc. and Dorling Kindersley Publishing
18. Erdogan ozbay, Adil Baykasoglu, Ahmed Oztas, Hakan Ozbebek. An experimental compression of optimum mix proportions of high strength concrete proposed by Taguchi method and genetic algorithm. In: Proceeding of 5th international symposium on intelligent manufacturing systems; 2006. p. 1062-70.
19. Ozbay Erdogan, Adil Baykasoglu, Ahmed Ozbay, and Hakan Ozbebek Investigating mix proportions of high strength self compacting concrete by using Taguchi method Constr Build Mater 23 2009 694 702
20. I. Turkmen, R. Gul, C. Celik, and Ramazan Demrboga Determination by the Taguchi method of optimum conditions for mechanical properties of high strength concrete with admixtures of silica fume and blast furnace slag Civ Eng Environ Syst 20 2 2003 105 118
21. A. Rahim, U.K. Sharma, K. Murugesan, A. Sharma, and P. Arora Optimization of post-fire residual compressive Strength of concrete by Taguchi method J Struct Fire Eng 3 2 2012 169 180
22. H. Tanyildizi, and Coskun Ahmet Performance of lightweight concrete with silica fume after high temperature Constr Build Mater 22 2008 2124 2129
23. H. Tanyildizi, and Coskun Ahmet The effect of high temperature on compressive strength and splitting tensile strength of structural lightweight concrete containing fly ash Constr Build Mater 22 2008 2269 2275
24. H. Tanyildizi Effect of temperature, carbon fibers, and silica fume on the mechanical properties of lightweight concretes New Carbon Mater 23 4 2008 339 344
25. H. Tanyildizi Statistical analysis for mechanical properties of polypropylene fibre reinforced lightweight concrete containing silica fume exposed to high temperature Mater Des 30 2008 3252 3258
26. IS 8112-1989 (Reaffirmed 2005). 43 Grade ordinary Portland cement - specification. Bureau of Indian Standards, New Delhi, India.
27. IS 383-1970. Specification for coarse and fine aggregate from natural sources for concrete. Bureau of Indian Standards, New Delhi, India.
28. J. Antony, and J.F. Antony Teaching the Taguchi method to industrial engineers Work Study 50 4 2001 141 149
29. K.A. Zaidi, U.K. Sharma, and N.M. Bhandari Effect of temperature on uni-axial compressive behavior of confined concrete Fire Saf J 48 2012 58 68
30. B. Zhang, N. Bicanic, C.J. Pearce, and G. Balabanic Residual fracture properties of normal- and high strength concrete subjected to high temperature Mag Concr Res 52 2 2000 123 136
31. P.K. Chaulia, and R. Das Process parameter optimization for fly ash brick by Taguchi method Mater Res 11 2 2008 159 164
32. Ranjith Roy. A primer on the Taguchi method. 2nd ed. Society of Manufacturing Engineers. 1990.
33. Y. Xu, Y.L. Wong, C.S. Poon, and M. Anson Impact of high temperature on PFA concrete Cem Concr Res 31 2001 1065 1073
34. S. Aydin, and B. Baradan Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars Cem Concr Res 37 2007 988 995
35. P. Kumar, P.B. Barua, and J.L. Gaindhar Quality optimization (multi-characteristic) through Taguchi's technique and utility concept Qual Reliab Eng Int 16 2000 475 485
36. H. Singh, and P. Kumar Optimizing multi-machining characteristics through Taguchi's approach and utility concept J Manuf Technol Manage 17 2 2006 255 274
37. Garg R. Effect of process parameters on performance Measures of wire electrical discharge machining. Ph.D Thesis. N.I.T Kurukshetra; 2010.
38. Tatjana V. Sibalija Multi-response optimisation of thermo-sonic copper wire-bonding process with correlated responses Int J Adv Manuf Technol 42 2009 363 371