New sliding-mode observer for position sensorless control of permanent-magnet synchronous motor

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 2, 2013, Pages 710-719

  Qiao, Zhaowei ^a   Shi, Tingna ^a   Wang, Yindong ^b   Yan, Yan ^a   Xia, Changliang ^a,c   He, Xiangning ^d  

^a TIANJIN UNIVERSITY   (China)

^b AVIATION INDUSTRY CORPORATION OF CHINA   (China)

^c TIANJIN POLYTECHNIC UNIVERSITY   (China)

^d ZHEJIANG UNIVERSITY   (China)

Author keywords

Back electromotive force (EMF); permanent magnet synchronous motor (PMSM); sensorless; sliding mode observer (SMO)

Indexed keywords

ELECTROMOTIVE FORCE; SYNCHRONOUS MOTORS;

BACK ELECTROMOTIVE FORCE; BACK-EMF; PERMANENT MAGNET SYNCHRONOUS MOTOR; PHASE COMPENSATION; POSITION SENSORLESS CONTROL; ROTOR POSITION; SENSOR LESS CONTROL; SENSORLESS; SLIDING-MODE OBSERVER; STATIC AND DYNAMIC PERFORMANCE;

PERMANENT MAGNETS;

EID: 84866634807     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2206359     Document Type: Article

References (42)

1. H. Liu and S. Li, "Speed control for PMSM servo system using predictive functional control and extended state observer," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1171-1183, Feb. 2012.
2. B. Alecsa, M. N. Cirstea, and A. Onea, "Simulink modeling and design of an efficient hardware-constrained FPGA-based PMSM speed controller," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 554-562, Aug. 2012.
3. M. Pacas, "Sensorless drives in industrial applications," IEEE Ind. Electron. Mag., vol. 5, no. 2, pp. 16-23, Jun. 2011.
4. C. Buccella, C. Cecati, and H. Latafat, "Digital control of power converters - A survey," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 437-447, Aug. 2012.
5. T. Atalik, M. Deniz, E. Koc, C. Gercek, B. Gultekin, M. Ermis, and I. Cadirci, "Multi-DSP and -FPGA based fully-digital control system for cascaded multilevel converters used in FACTS applications," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 511-527, Aug. 2012.
6. A. Al Nabulsi and R. Dhaouadi, "Efficiency optimization of a DSP-based standalone PV system using fuzzy logic and dual-MPPT control," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 573-584, Aug. 2012.
7. M. Rivera, J. Rodriguez, J. R. Espinoza, and H. Abu-Rub, "Instantaneous reactive power minimization and current control for an indirect matrix converter under a distorted ac-supply," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 482-490, Aug. 2012.
8. R. A. Mastromauro, M. Liserre, and A. Dell'Aquila, "Control issues in single-stage photovoltaic systems: MPPT, current and voltage control," IEEE Trans. Ind. Informat., vol. 8, no. 2, pp. 241-254, Apr. 2012.
9. A. Malinowski and Y. Hao, "Comparison of embedded system design for industrial applications," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 244-254, May 2011.
10. M. P. Kazmierkowski, M. Jasinski, and G. Wrona, "DSP-based control of grid-connected power converters operating under grid distortions," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 204-211, May 2011.
11. P. Tomei and C. M. Verrelli, "Observer-based speed tracking control for sensorless permanent magnet synchronous motors with unknown load torque," IEEE Trans. Autom. Control, vol. 56, no. 6, pp. 1484-1488, Jun. 2011.
12. A. Piippo, M. Hinkkanen, and J. Luomi, "Analysis of an adaptive observer for sensorless control of interior permanent magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 570-576, Feb. 2008. (Pubitemid 351344230)
13. T. Orlowska-Kowalska and M. Dybkowski, "Stator-current-based MRAS estimator for a wide range speed-sensorless induction-motor drive," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1296-1308, Apr. 2010.
14. J. Kang, X. Zeng, Y. Wu, and D. Hu, "Study of position sensorless control of PMSM based on MRAS," in Proc. IEEE Ind. Technol. Conf., Feb. 10-13, 2009, pp. 1-4.
15. H. Abu-Rub, M. R. Khan, A. Iqbal, and S. M. Ahmed, "MRAS-based sensorless control of a five-phase induction motor drive with a predictive adaptive model," in Proc. ISIE, Jul. 4-7, 2010, pp. 3089-3094.
16. J.-S. Jang, B.-G. Park, T.-S. Kim, D. M. Lee, and D.-S. Hyun, "Parallel reduced-order extended Kalman filter for PMSM sensorless drives," in Proc. IEEE Ind. Electron. Soc. Annu. Conf., Nov. 2008, pp. 1326-1331.
17. V. Smidl and Z. Peroutka, "Reduced-order square-root EKF for sensorless control of PMSM drives," in Proc. IEEE Ind. Electron. Soc. Annu. Conf., Nov. 2011, pp. 2000-2005.
18. D. Janiszewski, "Load torque estimation in sensorless PMSM drive using unscented Kalman filter," in Proc. ISIE, Jun. 27-30, 2011, pp. 643-648.
19. Z. Q. Zhu and L. M. Gong, "Investigation of effectiveness of sensorless operation in carrier-signal-injection-based sensorless-control methods," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3431-3439, Aug. 2011.
20. G. Foo and M. F. Rahman, "Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1270-1278, Apr. 2010.
21. A. Accetta, M. Cirrincione, M. Pucci, and G. Vitale, "Sensorless control of PMSM fractional horsepower drives by signal injection and neural adaptive-band filtering," IEEE Trans. Ind. Electron., vol. 59, no. 3, pp. 1355-1366, Mar. 2012.
22. R. Leidhold, "Position sensorless control of PM synchronous motors based on zero-sequence carrier injection," IEEE Trans. Ind. Electron., vol. 58, no. 12, pp. 5371-5379, Dec. 2011.
23. G. Pellegrino, P. Giangrande, and L. Salvatore, "Sensorless position control of permanent-magnet motors with pulsating current injection and compensation of motor end effects," IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1371-1379, May/Jun. 2011.
24. S. Bolognani, S. Calligaro, R. Petrella, andM. Tursini, "Sensorless control of IPM motors in the low-speed range and at standstill by HF injection and DFT processing," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 96-104, Jan./Feb. 2011.
25. Y. Inoue, Y. Kawaguchi, S. Morimoto, and M. Sanada, "Performance improvement of sensorless IPMSM drives in a low-speed region using online parameter identification," IEEE Trans. Ind. Appl., vol. 47, no. 2, pp. 798-804, Mar./Apr. 2011.
26. J. B. Chu, Y. W. Hu, W. X. Huang, M. J. Wang, J. F. Yang, and Y. X. Shi, "An improved sliding mode observer for position sensorless vector control drive of PMSM," in Proc. IEEE Power Electron. Motion Control Conf., May 2009, pp. 1898-1902.
27. S. Chi, Z. Zhang, and L. Y. Xu, "Sliding mode sensorless control of direct drive PM synchronous motors for washing machine applications," IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 582-590, Mar./Apr. 2009.
28. K. C. Veluvolu and Y. C. Soh, "High-gain observers with sliding mode for state and unknown input estimations," IEEE Trans. Ind. Electron., vol. 56, no. 9, pp. 3386-3393, Sep. 2009.
29. Q. D. Nguyen and S. Ueno, "Improvement of sensorless speed control for nonsalient type axial gap self-bearing motor using sliding mode observer," in Proc. IEEE Ind. Technol. Conf., Mar. 14-17, 2010, pp. 373-378.
30. A. Jaafar, E. Godoy, P. Lefranc, X. Lin Shi, A. Fayaz, and N. Li, "Nonlinear sliding mode observer and control of high order dc-dc converters," in Proc. IECON, Nov. 7-10, 2010, pp. 180-186.
31. H. Kim, J. Son, and L. Lee, "A high-speed sliding-mode observer for the sensorless speed control of a PMSM," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4069-4077, Sep. 2011.
32. A. Šabanovic, "Variable structure systems with sliding modes in motion control - A survey," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 212-223, May 2011.
33. B.Wang and X. Li, "Computer-controlled variable structure systems: The state of the art," IEEE Trans. Ind. Informat., vol. 8, no. 2, pp. 197-205, May 2012.
34. X. Yu and O. Kaynak, "Sliding-mode control with soft computing: A survey," IEEE Trans. Ind. Electron., vol. 56, no. 9, pp. 3275-3285, Sep. 2009.
35. A. J. Mehta and B. Bandyopadhyay, "The design and implementation of output feedback based frequency shaped sliding mode controller for the smart structure," in Proc. ISIE, Jul. 4-7, 2010, pp. 353-358.
36. G. Foo and M. F. Rahman, "Rotor position and speed estimation of a variable structure direct-torque-controlled IPM synchronous motor drive at very low speeds including standstill," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3715-3723, Nov. 2010.
37. Y.-S. Lu, "Sliding-mode controller design with internal model principle for systems subject to periodic signals," in Proc. IEEE Amer. Control Conf., Jul. 2004, vol. 3, pp. 1952-1957.
38. M. L. Corradini, G. Ippoliti, S. Longhi, and G. Orlando, "A quasisliding mode approach for robust control and speed estimation of PM synchronous motors," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1096-1104, Feb. 2012.
39. Z. Chen, M. Tomita, and S. Doki S, "New adaptive sliding observers for position and velocity sensorless controls of brushless dc motors," IEEE Trans. Ind. Electron., vol. 47, no. 3, pp. 582-591, Jun. 2000.
40. G. Tarchala, "Influence of the sign function approximation form on performance of the sliding-mode speed observer for induction motor drive," in Proc. IEEE Int. Symp. Ind. Electron., 2011, pp. 1397-1402.
41. G. L. Cascella, N. Salvatore, and L. Salvatore, "Adaptive sliding-mode observer for field oriented sensorless control of SPMSM," in Proc. IEEE Ind. Appl. Conf., 2003, pp. 1137-1143.
42. M. Comanescu, "Cascaded EMF and speed sliding mode observer for the nonsalient PMSM," in Proc. IEEE Ind. Electron. Soc. Conf., Nov. 7-10, 2010, pp. 792-797.