General design requirements and analysis of roadbed inductive power transfer system for dynamic electric vehicle charging

2012 IEEE Transportation Electrification Conference and Expo, ITEC 2012

Volumn , Issue , 2012, Pages

  Yilmaz, Murat ^a   Buyukdegirmenci, Veysel T ^a   Krein, Philip T ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

Battery charging; conductive charging; coupling; finite element analysis (FEA); inductive power transfer; plug in electric vehicles (PEVs); roadbed charging

Indexed keywords

3D-FINITE ELEMENT ANALYSIS; COUPLING COEFFICIENT; DESIGN REQUIREMENTS; FIELD STUDIES; INDUCTIVE POWER TRANSFER; INDUCTIVE POWER TRANSFER SYSTEMS; PICK-UP COILS; PLUG-INS; POWER LEVELS; POWER RATINGS; SYSTEM EFFICIENCY; TRAFFIC LOADS; VEHICLE SPEED; WIRE LOOP;

CHARGING (BATTERIES); COUPLINGS; ELECTRIC UTILITIES; EXHIBITIONS; FINITE ELEMENT METHOD; WIRE;

ELECTRIC VEHICLES;

EID: 84866596210     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ITEC.2012.6243497     Document Type: Conference Paper

References (44)

1. SAE Electric Vehicle Conductive Charge Coupler, SAE Std J1772, Nov. 2001.
2. GM-Volt: "Latest Chevy Volt Battery Pack and Generator Details and Clarifications", http://gmvolt. com/2007/08/29/latest-chevy-volt-battery- pack-and-generatordetails - and-clarifications, 2011.
3. SAE Electric Vehicle Inductive Coupling Recommended Practice, SAE 5-1773, Feb. 1, 1995.
4. P. Bauer, "Contactless power transfer: inductive charging of EV," Delft University of Technology, July 2010.
5. Mickel Budhia, Grant A. Covic, John T. Boys, and Chang-Yu Huang, "Development and evaluation of single sided flux couplers for contactless electric vehicle charging," Proc. IEEE Energy Conversion Cong., ECCE'11, 2011.
6. K. W. Klontz, D. M. Divan, D. W. Novotny and R. D. Lorenz, "Contactless battery charging system," US Patent 5157319, 1991.
7. John G. Hayes, "Battery Charging Systems for Electric Vehicles," General Motors Advanced Technical Vehicles, Torrance, USA.
8. Wei Zhang, Siu-Chung Wong, Chi K. Tse, and Qianhong Chen, "A Study of Sectional Tracks in Roadway Inductive Power Transfer System," Proc. IEEE Energy Conversion Cong., ECCE'11, 2011.
9. A. W. Green and J. T. Boys, "10 kHz inductively coupled power transfer concept and control," Proc. Power Electron. Variable Speed Drives Conf., pp. 694-699, Oct. 1994.
10. J. T. Boys, G. A. Covic and A. W. Green, "Stability and control of inductively coupled power transfer systems," in IEE Proc. Electric Power Appl., pp. 37-43, Jan. 2000.
11. P. Sergeant and A. Van den Bossche, "Inductive coupler for contactless power transmission," IET Elect. Power Appl., vol. 2, no. 1, pp. 1-7, Jan. 2008.
12. M. L. G. Kissin, J. T. Boys, and G. A. Covic, "Interphase mutual inductance in polyphase inductive power transfer systems," IEEE Trans. Ind. Elect., vol. 56, no. 7, pp. 2393-2400, July 2009.
13. C. E. Zell and J. G. Bolger, "Development of an engineering prototype of a roadway powered electric transit vehicle system: A public/private sector program," Proc. IEEE 32nd Vehicular Technology Conf., 1982.
14. S. Raabe, G. A. J Elliott, G. A. Covic and J. T. Boys, "A quadrature pickup for inductive power transfer systems," in Proc. IEEE Conf. Ind. Elect. Appl., pp. 68-73, May 2007.
15. J. Murakami, F. Sato, T.Watanabe, H. Matsuki, S. Kikuchi, K. Harakawa, and T. Satoh, "Consideration on cordless power station-contactless power transmission system," IEEE Trans. Magn., vol. 32, no. 5, pp. 5037-5039, Sep. 1996.
16. F. Sato, J. Murakami, T. Suzuki, H. Matsuki, S. Kikuchi, K. Harakawa, H. Osada, and K. Seki, "Contactless energy transmission to mobile loads by CLPS-test driving of an EV with starter batteries," IEEE Trans. Magn., vol. 33, no. 5, pp. 4203-4205, Sep. 1997.
17. G. A. Covic, J. T. Boys, M. L. G. Kissin, and H. G. Lu, "A three-phase inductive power transfer system for roadway-powered vehicles," IEEE Trans. Ind. Electronics., vol. 54, no. 6, pp. 3370-3378, Dec. 2007.
18. X. Liu and S. I. Hui, "Optimal design of a hybrid winding structure for planar contactless battery charging platform," IEEE Trans. Power Elect., vol. 23, no. 1, pp. 455-463, Jan. 2008.
19. J. G. Bolger, F. A. Kirsten, and L. S. Ng, "Inductive power coupling for an electric highway system," in Proc. IEEE 28th Veh. Technol. Conf., 1978, pp. 137-144.
20. M. L. G. Kissin, G. A. Covic, and J. T. Boys, "Estimating the output power of flat pickups in complex IPT systems," in Rec. IEEE Power Electronics Spec. Conf. 2008.
21. G. A. J. Elliott, J. T. Boys, and A. W. Green, "Magnetically coupled systems for power transfer to electric vehicles," in Proc. Int. Conf. Power Elect.. Drive Syst., Singapore, 1995.
22. Wei Zhang, Siu-Chung Wong, Chi K. Tse, and Qianhong Chen, "A Study of Sectional Tracks in Roadway Inductive Power Transfer System," in Proc. IEEE Energy Conversion Cong., ECCE'11, 2011.
23. M. L. G. Kissin, J. T. Boys, and G. A. Covic, "Interphase mutual inductance in polyphase inductive power transfer systems," IEEE Trans. Ind. Elect., vol. 56, no. 7, pp. 2393-2400, July 2009.
24. J. T. Boys, G. A. J. Elliot, and G. A. Covic, "An appropriate magnetic coupling co-efficient for the design and comparison of ICPT pickups," IEEE Trans. Power Electronics, vol. 22, no. 1, pp. 333-335, Jan. 2007.
25. O. H. Stielau and G. A. Covic, "Design of loosely coupled inductive power transfer systems," in Proc. Int. Conf. Power System Tech., pp. 85-90, Dec. 2000.
26. R. Mecke, C. Rathge, "High frequency resonant inverter for contactless energy transmission over large air gap," Rec. IEEE Power Electron. Spec. Conf., PESC, 2004.
27. G. A. J. Elliott, S. Raabe, Gr. A. Covic and J. T. Boys, "Multiphase pickups for large lateral tolerance contactless power-transfer systems," IEEE Trans. Ind. Elect., vol. 57, no. 5, pp. 1590-1598, May 2010.
28. Budhia, M., Covic, G.A., Boys, J.T., "Design and Optimisation of Magnetic Structures for Lumped Inductive Power Transfer Systems," in Proc. IEEE Energy Conversion Cong., ECCE'09, 2009.
29. J. Wang, S. L. Ho, W. Fu, C. T. Kit, and M. Sun, "Finite-Element Analysis and Corresponding Experiments of Resonant Energy Transfer for Wireless Transmission Devices" IEEE Trans. Magnetics, Vol. 47, No. 5, May 2011.
30. Chunbo Zhu, Kai Liu*, Chunlai Yu, Rui Ma, Hexiao Cheng, "Simulation and Experimental Analysis on Wireless Energy Transfer Based on Magnetic Resonances," in Proc. IEEE Vehicle Power Propulsion Conf., 2008.
31. Kacprzak, D. and Sykulski, J. K., "Finite Element Assisted Study of Magnetic Configurations of Flat Pickups for Inductively Coupled Power Transfer Systems," in Proc. Int. Conf. Electrical Machines, ICEM, 2006.
32. Tesla Motors, Tesla roadster spec sheet, 2009 [Online]. Available: http://www.teslamotors.com/display-data/teslaroadster-specsheet. pdf.
33. Nissan Zero Emission Website, Leaf specs May 1, 2010 [Online]. Available: http://www.nissan-zeroemission.com /EN/LEAF/ specs.html.
34. GM-Volt: "Latest Chevy Volt Battery Pack and Generator Details and Clarifications," 2011 [Online]. Available: http://gmvolt.com/2007/08/29/ latest-chevy-volt-battery-pack-and-generator details - and-clarifications.
35. Mitsubishi Motors, "Mitsubishi motors to bring new-generation EV i- MiEV to market," 2009 [Online]. Available: http://media. mitsubishi-motors. com/pressrelease/e/products/ detail1940.html.
36. U. K. Madawala and D. J. Thrimawithana, "A bidirectional inductive power interface for electric vehicles in V2G systems," IEEE Trans. Ind. Electron., vol. 58, no. 10, pp. 4789-4896, Oct. 2011.
37. R. Severns, E. Yeow, G. Woody, J. Halls, and J. Hayes, "An Ultra Compact Transformer for a l0kW to 120 kW Inductive Coupler for EV Battery Charging," in Proc. IEEE APEC, 1996, pp. 32-38.
38. K. Throngnumchai, T. Kai, and Y. Minagawa, "A Study on Receiver Circuit Topology of a Cordless Battery Charger for Electric Vehicles," in Proc. IEEE ECCE, 2011, pp. 843-850.
39. K. W. Klontzl A. Esse, P. J. Wolfs, and D. M. Divan, "Converter Selection for Electric Vehicle Charger Systems with a High-Frequency High-Power Link," in Rec. IEEE PESC, 1993, pp. 855-861.
40. J. Sallan, J. L. Villa, A. Llombart, and J. Fco. Sanz, "Optimal design of ICPT systems applied to electric vehicle battery charge," IEEE Trans. Ind. Elect., vol. 56, no. 6, pp. 2140-2149, June. 2009.
41. C. S. Wang, O. H. Stielau, and G. A. Covic, "Design considerations for a contactless electric vehicle battery charger," IEEE Trans. Ind. Elect., vol. 52, no. 5, pp. 1308-1314, Oct. 2005.
42. Y. H. Chao, J. Shieh, C. T. Pan, and W. C. Shen, "A closed-form oriented compensator analysis for series-parallel loosely coupled inductive power transfer systems," in Proc. IEEE Power Electron. Spec. Conf., PESC, 2007.
43. Duleepa J. Thrimawithana, Udaya K. Madawala, "Primary Side Controller for Inductive Power Transfer Systems," IEEE Int. Conf. Ind. Technol. (ICIT), March 2010.
44. Jeroen de Boeij, Elena Lomonova, Jorge Duarte, André Vandenput, "Contactless Energy Transfer to a Moving Actuator," IEEE Industry Applications Conf., 41st IAS Annual Meeting, Tampa, FL, Dec 2006.