A development process for Functional Products: Hardware, software, service support system and management of operation

International Journal of Product Development

Volumn 16, Issue 3-4, 2012, Pages 284-303

  Lindström, John ^a   Löfstrand, Magnus ^a   Karlberg, Magnus ^a   Karlsson, Lennart ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Complexity; Control; Coordination; Development management process; Development process; Functional product; Information sharing; Integrated project; Product service system; Project management; PSS; Subdevelopment processes

Indexed keywords

CONTROL ENGINEERING; INFORMATION DISSEMINATION; PRODUCT DESIGN; PROJECT MANAGEMENT;

COMPLEXITY; COORDINATION; DEVELOPMENT MANAGEMENT PROCESS; DEVELOPMENT PROCESS; FUNCTIONAL PRODUCTS; INFORMATION SHARING; INTEGRATED PROJECT; PRODUCT-SERVICE SYSTEMS; SUBDEVELOPMENT PROCESS;

INFORMATION MANAGEMENT;

EID: 84866539230     PISSN: 14779056     EISSN: 17418178     Source Type: Journal    
DOI: 10.1504/IJPD.2012.049831     Document Type: Article

References (57)

1. Alavi, M. and Leidner, D.E. (1999) 'Knowledge management systems: Issues, challenges, and benefits', Communications of the Association for Information Systems, Vol. 1, pp.1-37.
2. Alonso-Rasgado, T. and Thompson, G. (2006) 'Rapid design process for total care product creation', Journal of Engineering Design, Vol. 17, No. 6, pp.509-531.
3. Alonso-Rasgado, T., Thompson, G. and Elfstrom, B-O. (2004) 'The design of functional (total care) products', Journal of Engineering Design, Vol. 15, No. 6, pp.515-540.
4. Alzghoul, A. and Löfstrand, M. (2011) 'Increasing availability of industrial systems through data stream mining', Computers & Industrial Engineering, Vol. 60, pp.195-205.
5. Alzghoul, A., Löfstrand, M., Karlsson, L. and Karlberg, M. (2011) 'Data stream mining for increased functional product availability awareness', Proceedings of 3rd International Conference on Industrial Product Service Systems, Braunschweig, Germany, 5-6 May, pp.237-241.
6. Andrews, J.D. and Moss, T.R. (2002) Reliability and Risk Assessment, 2nd ed., Professional Engineering Publishing Limited, London and Bury St Edmunds, UK.
7. Ayas, K. (1996) 'Professional project management: A shift towards learning and a knowledge creating structure,' International Journal of Project Management, Vol. 14, No. 3, pp.131-136.
8. Baxter, D., Roy, R., Doultsinou, A., Gao, J. and Kalta, M. (2009) 'A knowledge management framework to support product-service systems design', International Journal of Computer Integrated Manufacturing, Vol. 22, No. 12, pp.1073-1088.
9. Bitran, G. and Pedrosa, L. (1998) 'A structured product development perspective for service operations', European Management Journal, Vol. 16, No. 2, pp.169-189.
10. Boujut, J-F. and Laureillard, P. (2003) 'A co-operation framework for product-process integration in engineering design', Design Studies, Vol. 23, pp.497-513.
11. Brännström, O., Elfström, B-O. and Thompson, G. (2001) 'Functional products create new demands on product development organisations', Proceedings of International Conference on Engineering Design, 21-23 August, Glasgow, Scotland.
12. Cooper, R.G. and Edgett, S.J. (2009) Product Innovation and Technology Strategy, Product Development Institute, Inc., USA.
13. Dennis, A. (1996) 'Information exchange and use in small group decision making', Small Group Research, Vol. 27, No. 4, pp.532-549.
14. Durnell Cramton, C. and Orvis, K.L. (2003) 'Overcoming barriers to information sharing in virtual teams', in Gibson, C.B. and Cohen, S.G. (Eds): Virtual Teams that Work: Creating Conditions for Virtual Team Effectiveness, Jossey-Bass, San Francisco.
15. Edwardsson, B., Gustafsson, A. and Roos, I. (2005) 'Service portraits in service research: A critical review', International Journal of Service Industry Management, Vol. 16, No. 1, pp.107-121.
16. Fontana, A. and Frey, J. (1994) 'Interviewing', in Denzin, N. and Lincoln, Y. (Eds): Handbook of Qualitative Research, Sage Publications, London.
17. Isaksson, O., Larsson, T.C. and Johansson, P. (2011) 'Towards a framework for developing product/service systems', Proceedings of 3rd International Conference on Industrial Product Service Systems, 5-6 May, Braunschweig, Germany, pp.44-49.
18. Jian-Ping Li, J-P., Thompson, G. and Alonso-Rasgado, T. (2009) 'Simulation based reliability assessment of services in the context of functional products', Journal of the Safety and Reliability Society, Vol. 29, No. 4, pp.47-78.
19. Johansson, C., Hicks, B., Larsson, A.C. and Bertoni, M. (2010) 'Knowledge maturity as a means to support decision making during product-service systems development projects in the aerospace sector', Project Management Journal, Vol. 42, No. 2, pp.32-50.
20. Grönroos, C. (1993) 'Toward a third phase in service quality research: Challenges and future directions', in Swartz, T., Bowen, D. and Brown, S. (Eds): Advances in Services Marketing and Management, JAI Press, Greenwich, CT, pp.49-64.
21. Komoto, H. and Tomiyama, T. (2008) 'Integration of a service CAD and a life cycle simulator', CIRP Annals Manufacturing Technology, Vol. 57, No. 1, pp.9-12.
22. Krishnan, V. and Ulrich, K.T. (2001) 'Product development decisions: A review of the literature', Management Science, Vol. 47, No. 1, pp.1-21.
23. Kvale, S. and Brinkmann, S. (2009) Interviews: Learning the Craft of Qualitative Research Interviewing, Sage Publications, Los Angeles, USA.
24. Leminen, S. (2001) 'Business logic in buy-seller relationships', Management Decision, Vol. 39, No. 8, pp.660-665.
25. Lindahl, M., Sundin, E., Shimomura, Y. and Sakao, T. (2006) 'An outline of an interactive design model for service engineering of functional sales offers', Proceedings of he 9th International Design Conference DESIGN 2006, 15-18 May, Dubrovnik, Croatia.
26. Linder, J. and Cantrell, S. (2000) Changing Business Models: Surveying the Landscape, Working Paper, Institute for Strategic Change, Accenture, pp.1-13.
27. Lindström, J., Karlsson, L., Löfstrand, M. and Karlberg, M. (2012) 'Functional product development: What information should be shared during the development process?', International Journal of Product Development, Vol. 16, No. 2, pp.95-111.
28. Löfstrand, M., Andrews, J., Karlberg, M. and Karlsson, L. (2011) 'Functional product system availability: Simulation driven design and operation through coupled multi-objective optimization', International Journal of Product Development, Vol. 13, No. 2, pp.119-131.
29. McAloone, T.C. and Robotham, A.J. (1999) 'A framework for product development', in Mortensen, N.H. and Sigurjonsson, J. (Eds): Critical Enthusiasm - Contributions to Design Science, NTNU, Trondheim, Norway, pp.83-98.
30. Meier, H., Roy, R. and Seliger, G. (2008) 'industrial product-service systems - IPS2', CIRP Annals Manufacturing Technology 2008, pp.1-24.
31. Miles, M. and Huberman, M. (1994) An Expanded Sourcebook - Qualitative Data Analysis, 2nd ed., Sage Publications, Thousand Oaks.
32. Mont, O. (2004) Product-Service Systems: Panacea or Myth?, Doctoral Thesis, The International Institute for Industrial Environmental Economics, Lund University, Sweden.
33. Morelli, N. (2002) 'The design of product/service systems from a designer's perspective', Proceedings of the Common Ground Design Research Society International Conference, 5-7 September, London, UK.
34. Morelli, N. (2006) 'Developing new product service systems (PSS): Methodologies and operational tools', Journal of Cleaner Production, Vol. 14, pp.1495-1501.
35. Osterwalder, A., Pigneur, Y. and Tucci, C.L. (2005) 'Clarifying business models: Origins, present, and future of the concept', Communications of the Association for Information Systems, Vol. 15, pp.1-40.
36. Patton, M.Q. (1990) Qualitative Evaluation and Research Methods, Sage Publications, London, UK.
37. Pich, M.T., Loch, C.H. and de Meyer, A. (2002) 'On uncertainty, ambiguity, and complexity in project management', Management Science, Vol. 48, No. 8, pp.1008-1023.
38. Pressman, R.S. (2010) Software Engineering: A Practitioners Approach, 7th ed., McGraw-Hill International Edition, New York, USA.
39. Sakao, T. and Shimomura, Y. (2007) 'Service engineering: A novel engineering discipline for producers to increase value combining service and product', Journal of Cleaner Production, Vol. 15, pp.590-604.
40. Schwalbe, K. (2009) Information Technology Project Management, Cengage Learning, Boston, MA.
41. Stahel, W. (1997) 'The functional economy: Cultural and organizational change', in Richards, D.J. (Ed.): The Industrial Green Game: Implications for Environmental Design and Management, National Academy Press, Washington DC, USA.
42. Stasser, G. and Titus, W. (1985) 'Pooling of unshared information in group decision making: Biased information sampling during discussion', Journal of Personality and Social Psychology, Vol. 48, No. 6, pp.1467-1478.
43. Stewart, T. and Ruckdeschel, C. (1998) 'Intellectual capital: The new wealth of organizations', Performance Improvement, Vol. 37, No. 7, pp.56-59.
44. Takata, S. (1999) 'Life cycle maintenance management', in Lee, J. and Wang, B. (Eds): Computer- Aided Maintenance: Methodologies and Practices, Kluwer Academic Publishers, Dordrecht, Netherlands.
45. Tan, A.R. and McAloone, T.C. (2006) 'Characteristics of strategies in product/service-system development', Proceedings of the International Design Conference - Design, 15-18 May, Dubrovnik, Croatia.
46. Tan, A.R., McAloone, T.C. and Myrup Andreasen, M. (2006) 'What happens to integrated product development models with product/service-system approaches?', Proceedings of the 6th Integrated Product Development Workshop (IPD), Schönebeck/Bad Salzelmen b. Magdeburg, 18-20 October, Germany.
47. Thoben, K-D., Eschenbächer, J. and Jagdev, H. (2001) 'Extended products: Evolving traditional product concepts', Proceedings of 7th International Conference on Concurrent Enterprising, 27-29 June, Bremen, Germany.
48. Thompson, G. (1999) Improving Maintainability and Reliability through Design, Professional Engineering Publishing Limited, London and Bury St Edmunds, UK.
49. Tomiyama, T. (2001) 'Service engineering to intensify service contents in product life cycles', proceedings of EcoDesign 2001, 2nd International Symposium on Environmental Conscious Design and Inverse Manufacturing, Tokyo.
50. Tukker, A. and Tischner, U. (2005) New Business for Old Europe - Product-Service Development, Competitiveness and Sustainability, Greenleaf Publishing, Sheffield, UK.
51. Ullman, D.G. (2003) The Mechanical Design Process, 3rd ed., McGraw-Hill, New York, USA.
52. Ulrich, K.T. and Eppinger, S.D. (2008) Product Design and Development, McGraw-Hill, New York, USA.
53. Unger, D. and Eppinger, S. (2010) 'Improving product development process design: A method for managing information flows, risks, and iterations', Journal of Engineering Design, pp.1-11.
54. Wagner, L., (2011) 'How to develop', Proceedings of 20th International Conference for the International Association of Management of Technology IAMOT2011, 10-14 April, Miami Beach, Florida, USA.
55. Weber, C., Steinbach, M., Botta, C. and Deubel, T. (2004) 'modelling of product-service systems (PSS) based on the PDD approach', Proceedings of International Design Conference - Design 2004, 18-21 May, Dubrovnik.
56. Wheelwright, S.C. and Clark, K.B. (1992) Revolutionizing Product Development, The Free Press, NY, USA.
57. White, A.L., Sloughton, M. and Feng, L. (1999) Servicizing: The Quiet Transition to Extended Product Responsibility, Tellus Institute, Boston, USA.