Steam reforming of model compounds and fast pyrolysis bio-oil on supported nickle metal catalysts for hydrogen production

Energy Sources, Part A: Recovery, Utilization and Environmental Effects

Volumn 34, Issue 21, 2012, Pages 2004-2015

  Lan, P ^a,b   Xu, Q L ^a   Lan, L H ^b   Xie, D ^a   Zhang, S P ^a   Yan, Y J ^a  

^a EAST CHINA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b GUANGXI UNIVERSITY   (China)

Author keywords

acetic acid; bio oil; cyclopentanone; furfural; hydrogen; meta cresol; nickel based catalyst; steam reforming

Indexed keywords

A-STABILITY; BIO OIL; CATALYTIC STEAM REFORMING; CYCLOPENTANONE; FAST PYROLYSIS BIO-OIL; FIXED BED REACTOR SYSTEM; HYDROGEN YIELDS; LIQUID PRODUCTS; LOW-CARBON TECHNOLOGIES; META-CRESOL; METAL CATALYST; MODEL COMPOUND; NICKEL-BASED CATALYST;

ACETIC ACID; ALDEHYDES; ALUMINUM; CATALYST ACTIVITY; CHEMICAL REACTORS; FURFURAL; HYDROGEN; HYDROGEN FUELS; HYDROGEN PRODUCTION; LANTHANUM OXIDES;

STEAM REFORMING;

EID: 84866419595     PISSN: 15567036     EISSN: 15567230     Source Type: Journal    
DOI: 10.1080/15567036.2010.492387     Document Type: Article

References (23)

1. Ba, T., Chaala, A., Garci-Perez, M., Rodrigue, D., and, Roy, C. 2004. Colloidal properties of bio-oils obtained by vacuum pyrolysis of softwood bark. Characterization of water-soluble and water-insoluble fractions. Energy & Fuels, 18: 704-712.
2. Basagiannis, A. C., and, Verykios, X. E. 2006. Reforming reactions of acetic acid on nickel catalysts over a wide temperature range. Appl. Catal. A, 308: 182-193.
3. Bimbela, F., Oliva, M., Ruiz, J., Garcia, L., and, Arauzo, J. 2009. Catalytic steam reforming of model compounds of biomass pyrolysis liquids in fixed bed: Acetol and n-butano. J. Anal. Appl. Pyrol., 85: 204-213.
4. Bridgwater, A. V. 1999. Principles and practice of biomass fast pyrolysis processes for liquids. J. Anal. Appl. Pyrol, 51: 3-22.
5. Chen, Y. Q., Yuan, L. X., Ye, T. Q., Qiu, S. B., Zhu, X. F., Torimoto, Y. S. F., Yamamoto, M., and, Li, Q. X. 2009. Effects of current upon hydrogen production from electrochemical catalytic reforming of acetic acid. Int. J. Hydrogen Energy, 34: 1760-1770.
6. Czernik, S., Evans, R., and, French, R. 2007. Hydrogen from biomass-production by steam reforming of biomass pyrolysis oil. Catal. Today, 129: 265-268.
7. 3 in fluidized and fixed-bed reactors. Catal. Today, 77: 181-189.
8. Fatsikostas, A. N., and, Verykios, X. E. 2004. Reaction network of steam reforming of ethanol over Ni-based catalysts. J. Catal., 225: 439-452.
9. 2 production for MC fuel cell by steam reforming of ethanol over MgO supported Pd, Rh, Ni, and Co catalysts. Catal. Commun., 5: 611-615.
10. Garcia, L., French, R., Czernik, S., and, Chornet, E. 2000. Catalytic steam reforming of bio-oils for the production of hydrogen: Effects of catalysts composition. Appl. Catal. A, 201: 225-239.
11. Garcia, L., Salvador, M. L., Arauzo, J., and, Bilbao, R. 1999. Catalytic steam gasification of pine sawdust. Effect of catalyst weight/biomass flow rate and steam/biomass ratios on gas production and composition. Energy & Fuels, 13: 851-859.
12. Kechagiopoulos, P. N., Voutetakis, S. S., Lemonidou, A. A., and, Vasalos, I. A. 2007. Sustainable hydrogen production via reforming of ethylene glycol using a novel spouted bed reactor. Catal. Today, 127: 246-255.
13. Lappas, A. A., Samolada, M. C., Iatridis, D. K., Voutetakis, S. S., and, Vasalos, I. A. 2002. Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals. Fuel, 81: 2087-2095.
14. Liguras, D. K., Kondarides, D. I., and, Verykios, X. E. 2003. Production of hydrogen for fuel cells by steam reforming of ethanol over supported noble metal catalysts. Appl. Catal. B, 43: 345-354.
15. Lu, Q., Li, W. Z., and, Zhu, X. F. 2009. Overview of fuel properties of biomass fast pyrolysis oils. Energy Convers. Manage., 50: 1376-1383.
16. Marquevich, M., Sonneman, G. W., Castells, F., and, Montane, D. 2002. Life cycle inventory analysis of hydrogen production by the steam-reforming process: Comparison between vegetable oils and fossil fuels as feedstock. Green Chem, 4: 414-423.
17. Pena, M. A., Gomez, J. P., and, Fierro, J. L. G. 1996. New catalytic routes for syngas and hydrogen production. Appl. Catal. A, 144: 7-57.
18. Rioche, C., Kulkarni, S., Meunier, F., Breen, J. P., and, Burch, R. 2005. Steam reforming of model compounds and fast pyrolysis bio-oil on supported noble metal catalysts. Appl. Catal. B: Environ., 61: 130-139.
19. Scott, D. S., Piskorz, J., and, Radlein, D. 1985. Liquid products from the continuous flash pyrolysis of biomass. Ind. Eng. Chem. Process Des. Dev., 24: 581-588.
20. Takanabe, K., Aika, K., Seshan, K., and, Lefferts, L. 2004. Sustainable hydrogen from bio-oilSteam reforming of acetic acid as a model oxygenate. J. Catal., 227: 101-108.
21. Trimm, D. L. 1997. Coke formation and minimisation during steam reforming reactions. Catal. Today, 37: 233-238.
22. Wang, D., Montane, D., and, Chornet, E. 1996. Catalytic steam reforming of biomass derived oxygenates: Acetic acid and hydroxyacetaldehyde. Appl. Catal. A, 143: 245-270.
23. Wu, C., Huang, Q., Sui, M., Yan, Y., and, Wang, F. 2008. Hydrogen production via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system. Fuel Proc. Technol., 89: 1306-1316.