Fabrication and characterization of PEI/PVP-based carbon hollow fiber membranes for CO 2/CH 4 and CO 2/N 2 separation

AIChE Journal

Volumn 58, Issue 10, 2012, Pages 3167-3175

  Salleh, Wan Norharyati Wan ^a   Ismail, Ahmad Fauzi ^a  

^a UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

Author keywords

Carbon dioxide; Carbon membrane; Polyetherimide; Polymer blends; Separation

Indexed keywords

AIR ATMOSPHERE; CARBON HOLLOW FIBERS; CARBON MEMBRANE; GAS MOLECULES; GAS PERMEATION PROPERTIES; MOLECULAR-SIEVING EFFECTS; POLYVINYL PYRROLIDONE; PURE GAS; THERMAL BEHAVIORS; TRANSPORT MECHANISM;

CARBON; CARBON DIOXIDE; CARBONIZATION; DIFFERENTIAL SCANNING CALORIMETRY; ETHERS; PERMEATION; POLYETHERIMIDES; POLYMER BLENDS; SEPARATION; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

GAS PERMEABLE MEMBRANES;

EID: 84866005666     PISSN: 00011541     EISSN: 15475905     Source Type: Journal    
DOI: 10.1002/aic.13711     Document Type: Article

References (40)

1. Favre E. Membrane processes and post combustion carbon dioxide capture: challenges and prospects. Chem Eng J. 2011; 171: 782-793.
2. Liu L, Chakma A, Feng X. Preparation of hollow fiber poly(ether block amide)/polysulfone composite membranes for separation of carbon dioxide from nitrogen. Chem Eng J. 2004; 105: 43-51.
3. Sridhar S, Smitha B, Aminabhavi TM. Separation of carbon dioxide from natural gas mixtures through polymeric membranes-a review. Sep Purif Rev. 2007; 36: 113-174.
4. Saufi SM, Ismail AF. Fabrication of carbon membranes for gas separation-a review. Carbon. 2004; 42: 241-259.
5. Ismail AF, David LIB. A review on the latest development of carbon membranes for gas separation. J Membr Sci. 2001; 193: 1-18.
6. Salleh WNW, Ismail AF, Matsuura T, Abdullah, MS. Precursor selection and process conditions in the preparation of carbon membrane for gas separation: a Review. Sep Purif Rev. 2011; 40: 261-311.
7. Linkov VM, Sanderson RD, Jacobs EP. Carbon membranes from precursors containing low-carbon residual polymers. Polym Int. 1994; 35: 239-242.
8. Kim YK, Park HB, Lee YM. Carbon molecular sieve membranes derived from thermally labile polymer containing blend polymers and their gas separation properties. J Membr Sci. 2004; 243: 9-17.
9. Lee HJ, Suda H, Haraya K, Moon SH. Gas permeation properties of carbon molecular sieving membranes derived from the polymer blend of polyphenylene oxide (PPO)/polyvinylpyrrolidone (PVP). J Membr Sci. 2007; 296: 139-146.
10. Ozaki J, Endo N, Ohizumi W, Igarashi K, Nakahara M, Oya A. Novel preparation method for the production of mesoporous carbon fiber from a polymer blend. Carbon. 1997; 35: 1031-1033.
11. Coutinho EB, Salim VMM, Borges CP. Preparation of carbon hollow fiber membranes by pyrolysis of polyetherimide. Carbon. 2003; 41: 1707-1714.
12. Rao PS, Wey MY, Tseng HH, Kumar IA, Weng TH. A comparison of carbon/nanotube molecular sieve membranes with polymer blend carbon molecular sieve membranes for the gas permeation application. Micropor Mesopor Mater. 2008; 113: 499-510.
13. Hatori H, Kobayashi T, Hanzawa Y, Yamada Y, Iimura Y, Kimura T, Shiraishi M. Mesoporous carbon membranes from polyimide blended with poly (ethylene glycol). J Appl Polym Sci. 2001; 79: 836-841.
14. Kim YK, Park HB, Lee YM. Gas separation properties of carbon molecular sieve membranes derived from polyimide/polyvinylpyrrolidone blends: effect of the molecular weight of polyvinylpyrrolidone. J Membr Sci. 2005; 251: 159-167.
15. Zhang X, Hu H, Zhu Y, Zhu S. Carbon molecular sieve membranes derived from phenol formaldehyde novolac resin blended with poly (ethylene glycol). J Membr Sci. 2007; 289: 86-91.
16. 4 separation and hydrogen purification. J Membr Sci. 2009; 328: 174-185.
17. Lee HJ, Yoshimune M, Suda H, Haraya K. Effects of oxidation curing on the permeation performances of polyphenylene oxide-derived carbon membranes. Desalination. 2006; 193: 51-57.
18. Lee HJ, Yoshimune M, Suda H, Haraya K. Gas permeation properties of poly (2, 6-dimethyl-1, 4-phenylene oxide) (PPO) derived carbon membranes prepared on a tubular ceramic support. J Membr Sci. 2006; 279: 372-379.
19. Lee HJ, Kim DP, Suda H, Haraya K. Gas permeation properties for the post-oxidized polyphenylene oxide (PPO) derived carbon membranes: effect of the oxidation temperature. J Membr Sci. 2006; 282: 82-88.
20. Lee HJ, Suda H, Haraya K. Characterization of the post-oxidized carbon membranes derived from poly (2, 4-dimethyl-1, 4-phenylene oxide) and their gas permeation properties. Sep Purif Technol. 2008; 59: 190-196.
21. 2 plasticization of polyethersulfone/polyimide gas separation membranes. AIChE J. 2003; 49: 1702-1711.
22. Ismail AF, Dunkin IR, Gallivan SL, Shilton SJ. Production of super selective polysulfone hollow fiber membranes for gas separation. Polymer. 1999; 40: 6499-6506.
23. Lau WJ, Ismail AF. Theoretical studies on the morphological and electrical properties of blended PES/SPEEK nanofiltration membranes using different sulfonation degree of SPEEK. J Membr Sci. 2009; 334: 30-42.
24. Kusuki Y, Shimazaki H, Tanihara N, Nakanishi S, Yoshinaga T. Gas permeation properties and characterization of asymmetric carbon membranes prepared by pyrolyzing asymmetric polyimide hollow fiber membrane. J Membr Sci. 1997; 134: 245-253.
25. Zhang B, Wang T, Wu Y, Liu Q, Liu S, Zhang S, Qiu J. Preparation and gas permeation of composite carbon membranes from poly (phthalazinone ether sulfone ketone). Sep Purif Technol. 2008; 60: 259-263.
26. 4 separation. J Membr Sci. 2011; 372: 387-395.
27. Bos A, Punt I, Strathmann H, Wessling M. Suppression of gas separation membrane plasticization by homogeneous polymer blending. AIChE J. 2001; 47: 1088-1093.
28. Hying C, Staude E. The influence of polyvinylpyrrolidone (PVP) in polyetherimid/PVP blend membranes upon vapor separation. J Membr Sci. 1998; 144: 251-257.
29. Gabriel AS, Irena E, Moshe S. Carbon membranes for high temperature gas separations: experiment and theory. AIChE J. 2004; 50: 596-610.
30. Wang T, Zhang B, Qiu J, Wu Y, Zhang S, Cao Y. Effects of sulfone/ketone in poly(phthalazinone ether sulfone ketone) on the gas permeation of their derived carbon membranes. J Membr Sci. 2009; 330: 319-325.
31. Sedigh MG, Jahangiri M, Liu PKT, Sahimi M, Tsotsis TT. Structural characterization of polyetherimide-based carbon molecular sieve membranes. AIChE J. 2000; 46: 2245-2255.
32. Geiszler VC. Polyimide precursor for carbon molecular sieve membranes. PhD Thesis. The University of Texas, 1997.
33. Park HB, Suh IY, Lee YM. Novel pyrolytic carbon membranes containing silica: preparation and characterization. Chem Mater. 2002; 14: 3034-3046.
34. Lee HJ, Suda H, Haraya K. Preparation of carbon membranes derived from polymer blends in the presence of a thermally labile polymer. Sep Sci Technol. 2007; 42: 59-71.
35. Kyotani T. Control of the pore structure in carbon. Carbon. 2000; 38: 269-286.
36. Favvas EP, Kouvelos EP, Romanos GE, Pilatos GI, Mitropoulos AC, Kanellopoulos NK. Characterization of highly selective microporous carbon hollow fiber membranes prepared from a commercial co-polyimide precursor. J Porous Mater. 2008; 15: 625-633.
37. Favvas EP, Kapantaidakis GC, Nolan JW, Mitropoulos AC, Kanellopoulos NK. Preparation, characterization and gas permeation properties of carbon hollow fiber membranes based on Matrimid 5218 precursor. J Mater Process Technol. 2007; 186: 102-110.
38. Tin PS, Chung TS, Hill AJ. Advanced fabrication of carbon molecular sieve membranes by nonsolvent pretreatment of precursor polymers. Ind Eng Chem Res. 2004; 43: 6476-6483.
39. Chatzidaki EK, Favvas EP, Papageorgiou SK, Kanellopoulos NK, Theophilou NV. New polyimide-polyaniline hollow fibers: synthesis, characterization and behavior in gas separation. Eur Polym J. 2007; 43: 5010-5016.
40. 2 separation. J Membr Sci. 2003; 213: 285-291.