Nonlinear stability analysis of double-curved shallow fgm panels on elastic foundations in thermal environments

Mechanics of Composite Materials

Volumn 48, Issue 4, 2012, Pages 435-448

  Duc, Nguyen Dinh ^a   Quan, Tran Quoc ^a  

^a VIETNAM NATIONAL UNIVERSITY   (Viet Nam)

Author keywords

double curved panels; elastic foundation; functionally graded material; imperfection; thermal environments

Indexed keywords

BEAMS AND GIRDERS; BIOLOGICAL ORGANS; DEFECTS; FUNCTIONALLY GRADED MATERIALS; GALERKIN METHODS; GEOMETRY; POISSON DISTRIBUTION;

ANALYTICAL INVESTIGATIONS; BUCKLING AND POST-BUCKLING; CURVED PANEL; ELASTIC FOUNDATION; GEOMETRICAL NON-LINEARITY; INITIAL GEOMETRICAL IMPERFECTIONS; NONLINEAR STABILITY ANALYSIS; THERMAL ENVIRONMENT; DOUBLE-CURVED PANELS; EFFECTS OF MATERIALS; FOUNDATION STIFFNESS; FUNCTIONALLY GRADED; GEOMETRICAL PROPERTY; LOAD-DEFLECTION CURVE; NON-LINEAR RESPONSE; POISSON'S RATIO; POSTBUCKLING; POWER LAW DISTRIBUTION; SHELL THEORY; SIMPLY SUPPORTED; THERMO MECHANICAL LOADS; THICKNESS DIRECTION; YOUNG'S MODULUS;

FOUNDATIONS; BIOLOGICAL ORGANS;

EID: 84865982087     PISSN: 01915665     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11029-012-9289-z     Document Type: Article

References (37)

1. R Javaheri and M. R. Eslami, “Thermal buckling of functionally graded plates,” AIAA, 40, No. 1, 162-169 (2002).
2. R. Javaheri and M. R. Eslami, “Thermal buckling of functionally graded plates based on a higher-order theory,” J. Thermal Stress, 25, 603-625 (2002).
3. B. A. Samsam Shariat and M. R. Eslami, “Buckling of thick functionally graded plates under mechanical and thermal loads,” Compos Struct., 78, 433-439 (2007).
4. B. A. Samsam Shariat and M. R. Eslami, “Thermal buckling of imperfect functionally graded plates,” Int. J. Solids Struct., 43, 4082-4096 (2006).
5. W. Lanhe, “Thermal buckling of a simply supported moderately thick rectangular FGM plate,” Compos. Struct., 64, 211-218 (2004).
6. X. Zhao, Y. Y. Lee, and K. M. Liew, “Mechanical and thermal buckling analysis of functionally graded plates,” Compos. Struct., 90, 161-171 (2009).
7. K. M. Liew, J. Yang, and S. Kitipornchai, “Postbuckling of piezoelectric FGM plates subject to thermo-electromechanical loading,” Int. J. Solids Struct., 40, 3869-3892 (2003).
8. J. Yang, K. M. Liew, and S. Kitipornchai, “Imperfection sensitivity of the post-buckling behavior of higher-order shear deformable functionally graded plates,” Int. J. Solids Struct., 43, 5247-5266 (2006).
9. 9, H.-S. Shen, “Postbuckling of FGM plates with piezoelectric actuators under thermo-electro-mechanical loadings,” Int. J. Solids Struct., 42, 6101-6121 (2005).
10. H.-S. Shen, “Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties,” Int. J. Mech. Sci., 49, 466-478 (2007).
11. Y. Y. Lee, X. Zhao, and J. N. Reddy, “Postbuckling analysis of functionally graded plates subject to compressive and thermal loads,” Computer Methods in Applied Mechanics and Engineering, 199, 1645-1653 (2010).
12. H.-S. Shen, “Postbuckling analysis of axially loaded functionally graded cylindrical panels in thermal environments,” Int. J. Solids Struct., 39, 5991-6010 (2009).
13. H.-S. Shen and N. Noda, “Postbuckling of FGM cylindrical shells under combined axial and radial mechanical loads in thermal environments,” Int. J. Solids and Struct., 42, 4641-4662 (2005).
14. H.-S, Shen and K. M. Liew, “Postbuckling of axially loaded functionally graded cylindrical panels with piezoelectric actuators in thermal environments,” J. Engng. Mech. ASCE, 130, No. 8, 982-995 (2004).
15. J. Yang, K. M. Liew, Y. F. Wu, and S. Kitipornchai, “Thermomechanical post-buckling of FGM cylindrical panels with temperature-dependent properties,” Int. J. Solids Struct., 43, 307-324 (2006).
16. X. Zhao and K. M. Liew, “Geometrically nonlinear analysis of functionally graded shells,” Int. J. Mech. Sci., 51, 131-144 (2009).
17. K. J. Sohn and J. H. Kim, “Structural stability of functionally graded panels subjected to aerothermal loads,” Compos. Struct., 82, 317-325 (2008).
18. 18.Y. Yang, K. M. Liew, Y. F. Wu, and S. Kitipornchai, “Thermomechanical postbuckling of FGM cylindrical panels with temperature-dependent properties,” Int. J. Solids and Struct., 43, 307-324 (2006).
19. X. Zhao and K. M. Liew, “Geometrically nonlinear analysis of functionally graded shells,” Int. J. Mech. Sci., 51, 131-144 (2009).
20. N. D. Duc and H. V. Tung, “Nonlinear analysis of stability for functionally graded cylindrical panels under axial compression,” Comput. Mater. Sci., 49, 313-316 (2010).
21. N. D. Duc and H. V. Tung, “Nonlinear response of pressure-loaded functionally graded cylindrical panels with temperature effects,” Compos. Struct., 92, 1664-1672 (2010).
22. N. D. Duc and H. V. Tung, “Mechanical and thermal posbuckling of higher-order shear-deformable fuctionally graded plates on elastic foundations,” Compos. Struct., 93, 2874-2881 (2011).
23. N. D. Duc and H. V. Tung, “Mechanical and thermal postbuckling of shear-deformable FGM plates with temperaturadependent properties.” Mechanics of Composite Materials, 46, 461-476 (2010).
24. H. Huang and Q. Han, Buckling of imperfect functionally graded cylindrical shells under axial compression,” Europ. J. Mech. A/Solids, 27, 1026-1036 (2008).
25. H. Huang and Q. Han, “Research on nonlinear postbuckling of functionally graded cylindrical shells under radial loads,” Compos. Struct., 92, 1352-1357 (2010).
26. H. Huang and Q. Han, “Nonlinear buckling of torsion-loaded functionally graded cylindrical shells in thermal environment,” Europ. J. Mech. A/Solids, 29, 42-48 (2010).
27. L. Librescu and M. Y. Chang, “Imperfection sensitivity and postbuckling behavior of shear-deformable composite double-curved shallow panels,” Int. J. Solids Struct., 29, No. 9, 1065-1083 (1992).
28. M. Y. Chang and L. Librescu, “Postbuckling of shear-deformable flat and curved panels under combined loading conditions,” Int. J. Mech. Sci., 37, No. 2, 121-143 (1995).
29. L. Librescu, M. P. Nemeth, J. H. Starnes Jr, and W. Lin, “Nonlinear response of flat and curved panels subjected to thermomechanical loads,” J. Thermal Stress, 23, 549-582 (2000).
30. L. Librescu and W. Lin, “Postbuckling and vibration of shear deformable flat and curved panels on a non-linear elastic foundation,” Int. J. Non.-Lin. Mech., 32, No. 2, 211-225 (1997).
31. W. Lin and L. Librescu, “Thermomechanical postbuckling of geometrically imperfect shear-deformable flat and curved panels on a nonlinear foundation,” Int. J. Engng. Sci., 36, No. 2, 189-206 (1998).
32. Z. Y. Huang, C. F. Lu, and W. Q. Chen, “Benchmark solutions for functionally graded thick plates resting on Winkler-Pasternak elastic foundations,” Compos. Struct., 85, 95-104 (2008).
33. A. M. Zenkour, “Hygro-thermo-mechanical effects on FGM plates resting on elastic foundations,” Compos. Struct., 93, 234-238 (2010).
34. H.-S. Shen and Z.-X. Wang, “Nonlinear bending of FGM plates subjected to combined loading and resting on elastic foundations,” Compos. Struct., 92, 2517-2524 (2010).
35. H.-S. Shen, “Postbuckling of shear deformable FGM cylindrical shells surrounded by an elastic medium,” Int. J. Mech. Sci., 51, 372-383 (2009).
36. H.-S. Shen, J. Yang, and S. Kitipornchai, “Postbuckling of internal pressure loaded FGM cylindrical shells surrounded by an elastic medium,” Europ. J. Mech., A/Solids, 29, 448-460 (2010).
37. J. N. Reddy and C. F. Liu, “A higher-order shear deformation theory of laminated elastic shells,” Int. J. Engng. Sci., 23. No. 3, 319-330 (1985).