Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash

Construction and Building Materials

Volumn 37, Issue , 2012, Pages 518-525

  Altwair, Nurdeen M ^a,b   Megat Johari, M A ^a   Saiyid Hashim, S F ^c  

^a SCHOOL OF CHEMICAL ENGINEERING   (Malaysia)

^b Al Merghab University   (Libyan Arab Jamahiriya)

^c SCHOOL OF MATERIALS AND MINERAL RESOURCES ENGINEERING   (Malaysia)

Author keywords

Deflection hardening behaviour; Flexural deflection capacity; Flexural performance; Green engineered cementitious composite; Multiple cracking; Palm oil fuel ash

Indexed keywords

ENGINEERED CEMENTITIOUS COMPOSITE (ECC); FLEXURAL DEFLECTION; FLEXURAL PERFORMANCE; FUEL ASH; MULTIPLE CRACKING;

BINDERS; CRACKS; FIBER OPTIC SENSORS; HARDENING; TENSILE TESTING; VEGETABLE OILS;

CONCRETE BEAMS AND GIRDERS;

EID: 84865828805     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2012.08.003     Document Type: Article

References (36)

1. Y.Y. Kim, H.J. Kong, and V.C. Li Design of engineered cementitious composite suitable for wet-mixture shotcreting ACI Mater J 100 6 2003 511 518
2. V.C. Li Engineered cementitious composites (ECCs)-material, structural, and durability performance Concrete construction engineering handbook 2007 CRC Press Boca Raton
3. V.C. Li Advances in ECC research ACI Special Publications 206 2002 373 400
4. X.R. Cai, B.Q. Fu, and S.L. Xu The apparent density, tensile properties and drying shrinkage of ultra high toughness cementitious composites Adv Mater Res 261 2011 223 227
5. V.C. Li On engineered cementitious composites (ECCs) J Adv Concr Technol 1 3 2003 215 230
6. P.C. Hewlett Lea's chemistry of cement and concrete 4th ed. 2005 Elsevier Oxford
7. E. Worrell, L. Price, N. Martin, C. Hendriks, and L.O. Meida Carbon dioxide emissions from the global cement industry 1 Annu Rev Energy Environ 26 1 2001 303 329
8. L.G. Sheng, and T.W. Kwang Case study of palm oil waste fuelled power plant 2010 China EnerSave Ltd.
9. P. Chindaprasirt, S. Homwuttiwong, and C. Jaturapitakkul Strength and water permeability of concrete containing palm oil fuel ash and rice husk-bark ash Constr Build Mater 21 7 2007 1492 1499
10. C. Jaturapitakkul, K. Kiattikomol, W. Tangchirapat, and T. Saeting Evaluation of the sulfate resistance of concrete containing palm oil fuel ash Constr Build Mater 21 7 2007 1399 1405
11. C.Y. Yin, S.A.S.A. Kadir, Y.P. Lim, S.N. Syed-Ariffin, and Z. Zamzuri An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass waste in a boiler Fuel Process Technol 89 7 2008 693 696
12. S. Rukzon, and P. Chindaprasirt An experimental investigation of the carbonation of blended Portland cement palm oil fuel ash mortar in an indoor environment Indoor Built Environ 18 4 2009 313 318
13. A. Awal, and M.W. Hussin The effectiveness of palm oil fuel ash in preventing expansion due to alkali-silica reaction Cem Concr Compos 19 4 1997 367 372
14. W. Tangchirapat, J. Tangpagasit, S. Waew-kum, and C. Jaturapitakkul A new pozzolanic material from palm oil fuel ash KMUTT Res Dev J 26 4 2003 459 473
15. M.A. Nurdeen, M.A.M. Johari, and S.F.S. Hashim Strength activity index and microstructural characteristics of treated palm oil fuel ash Int J Civil Environ Eng 11 5 2011 100 107
16. M.A. Nurdeen, M.A. Megat Johari, and S.F. Saiyid Hashim Influence of calcination temperature on characteristics and pozzolanic activity of palm oil waste ash Aust J Basic Appl Sci 5 11 2011 1010 1018
17. M.A. Megat Johari, A.M. Zeyad, N. Muhamad Bunnori, and K.S. Ariffin Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash Constr Build Mater 30 3 2012 281 288
18. M. Maalej, and V.C. Li Flexural strength of fiber cementitious composites J Mater Civ Eng 6 3 1994 390 406
19. M. Maalej, and V.C. Li Flexural/tensile-strength ratio in engineered cementitious composites J Mater Civ Eng 6 4 1994 513 528
20. Kunieda M, Rokugo K. Measurement of crack opening behavior within ECC under bending moment. In: Proceedings of the workshop on HPFRCC in structure applications, Honolulu, Hawaii, USA, May 2006. p. 313-21.
21. Wang S. Micromechanics based matrix design for engineered cementitious composites. PhD Thesis, University of Michigan; 2005.
22. Wang S, Li VC. Polyvinyl alcohol fiber reinforced engineered cementitious composites. material design and performances. In: Fischer G, Li VC, editors. Proc, int'l RILEM workshop HPFRCC in structural applications, RILEM SARL; 2006. p. 65-73.
23. C. Chandara, E. Sakai, K.A.M. Azizli, Z.A. Ahmad, and S.F.S. Hashim The effect of unburned carbon in palm oil fuel ash on fluidity of cement pastes containing superplasticizer Constr Build Mater 24 9 2010 1590 1593
24. V.C. Li, C. Wu, S. Wang, and T. Saito Interface tailoring for strain-hardening PVA-ECC ACI Mater J 99 5 2002 463 472
25. S. Wang, and V.C. Li Engineered cementitious composites with high-volume fly ash ACI Mater J 104 3 2007 233
26. Li VC, Mihashi H, Wu H, Alwan J, Brincker R, Horii H, et al. Micromechanical models of mechanical response of HPFRCC. In: Naaman AE, Reinhardt HW, editors. High performance fiber reinforced cementitious composites, RILEM proceedings, vol. 31; 1996. p. 43-100.
27. H. Mihashi, J.P. De Barros Leite, S. Yamakoshi, and A. Kawamata Controlling fracture toughness of matrix with mica flake inclusions to design pseudo-ductile fibre reinforced cementitious composites Eng Fract Mech 74 1-2 2007 210 222
28. S. Qian, J. Zhou, M. De Rooij, E. Schlangen, G. Ye, and K. Van Breugel Self-healing behavior of strain hardening cementitious composites incorporating local waste materials Cem Concr Compos 31 9 2009 613 621
29. M. Sahmaran, M. Lachemi, K.M.A. Hossain, R. Ranade, and V.C. Li Influence of aggregate type and size on ductility and mechanical properties of engineered cementitious composites ACI Mater J 106 3 2009
30. M. Li, and V.C. Li High-early-strength engineered cementitious composites for fast, durable concrete repair - material properties ACI Mater J 108 1 2011 3
31. Y. Yang, X. Gao, H. Deng, P. Yu, and Y. Yao Effects of water/binder ratio on the properties of engineered cementitious composites J Wuhan Univ Technol - Mater Sci Ed 25 2 2010 298 302
32. J.K. Kim, J.S. Kim, G.J. Ha, and Y.Y. Kim Tensile and fiber dispersion performance of engineered cementitious composites (ECCs) produced with ground granulated blast furnace slag Cem Concr Res 37 7 2007 1096 1105
33. H. Toutanji, B. Xu, J. Gilbert, and T. Lavin Properties of poly (vinyl alcohol) fiber reinforced high-performance organic aggregate cementitious material: converting brittle to plastic Constr Build Mater 24 1 2010 1 10
34. P.A.G. Gideon, and G.V. Zijl Durability under mechanical load-micro-crack formation (ductility) F. Wittmann, Z. Van, Durability of strain-hardening fibre-reinforced cement-based composites (SHCC) 1st ed. RILEM state of the art reports 2011 Springer 9 39
35. S. Qian, and V.C. Li Simplified inverse method for determining the tensile strain capacity of strain hardening cementitious composites J Adv Concr Technol 5 2 2007 235 246
36. J. Zhou, S. Qian, M.G. Sierra Beltran, G. Ye, K. van Breugel, and V.C. Li Development of engineered cementitious composites with limestone powder and blast furnace slag Mater Struct 43 6 2010 803 814