In situ synthesis of rubber nanocomposites

Advanced Structured Materials

Volumn 9, Issue , 2011, Pages 57-85

  Messori, Massimo ^a  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84864770729     PISSN: 18698433     EISSN: 18698441     Source Type: Book Series    
DOI: 10.1007/978-3-642-15787-5_2     Document Type: Review

References (74)

1. Donnet, J.-B., Custodero, E.: Reinforcement of elastomers by particulate fillers. In: James, E.M., Burak, E., Frederick, R.E. (eds.) Science and Technology of Rubber, 3rd edn. Academic Press, Burlington (2005)
2. Klein, L.C., Wojcik, A.B.: Polymer-ceramic nanocomposites: polymer overview. In: Buschow Jr, K.H., Robert, W.C., Merton, C.F., et al. (eds.) Encyclopedia of Materials: Science and Technology. Elsevier, Oxford (2001)
3. Hewitt, N.: Silica as a reinforcing filler. In: Compounding Precipitated Silica in Elastomers. William Andrew Publishing, Norwich, NY (2007)
4. Brinker, C., Scherer, G.: Sol-Gel Science: the Physics and Chemistry of Sol-Gel Processing. Academic Press, Boston (1990)
5. Sanchez, C., Julian, B., Belleville, P., et al.: Applications of hybrid organic-inorganic nanocomposites. J. Mater. Chem. 15, 3559-3592 (2005)
6. Novak, B.M.: Hybrid nanocomposite materials-between inorganic glasses and organic polymers. Adv. Mater. 5, 422-433 (1993)
7. Mark, J.E.: The sol-gel route to inorganic-organic composites. Heterogeneous Chem. Rev. 3, 307-326 (1996)
8. Mark, J.E.: Ceramic-reinforced polymers and polymer-modified ceramics. Polym. Eng. Sci. 36, 2905-2920 (1996)
9. Mark, J.E.: Some novel polymeric nanocomposites. Acc. Chem. Res. 39, 881-888 (2006)
10. Mark, J.E.: Ceramic-modified elastomers. Curr. Opin. Solid State Mater. Sci. 4, 565-570 (1999)
11. Rajan, G.S., Sur, G.S., Mark, J.E., et al.: Preparation and characterization of some unusually transparent poly(dimethylsiloxane) nanocomposites. J. Polym. Sci. Polym. Phys. 41, 1897-1901 (2003)
12. Breiner, J.M., Mark, J.E., Beaucage, G.: Dependence of silica particle sizes on network chain lengths, silica contents, and catalyst concentrations in in situ-reinforced polysiloxane elastomers. J. Polym. Sci. Polym. Phys. 37, 1421-1427 (1999)
13. Li, Z.L., Han, W., Kozodaev, D., et al.: Surface properties of poly(dimethylsiloxane)-based inorganic/organic hybrid materials. Polymer 47, 1150-1158 (2006)
14. Dewimille, L., Bresson, B., Bokobza, L.: Synthesis, structure and morphology of poly (dimethylsiloxane) networks filled with in situ generated silica particles. Polymer 46, 4135-4143 (2005)
15. Bokobza, L.: New developments in rubber reinforcement. Kgk-Kaut Gummi Kunst 62, 23-27 (2009)
16. Bokobza, L.: Elastomeric composites. I. Silicone composites. J. Appl. Polym. Sci. 93, 2095-2104 (2004)
17. Murugesan, S., Mark, J.E., Beaucage, G.: Structure-property relationships for poly(dimethylsiloxane) networks in situ filled using titanium 2-ethylhexoxide and zirconium n-butoxide. ACS Symp. Ser. 838, 163-169 (2003)
18. Murugesan, S., Sur, G.S., Mark, J.E., et al.: In situ catalyst generation and controlled hydrolysis in the sol-gel precipitation of zirconia and titania particles in poly (dimethylsiloxane). J. Inorg. Organomet. P 14, 239-252 (2004)
19. Wen, J., Mark, J.E.: Precipitation of silica-titania mixed-oxide fillers into poly (dimethylsiloxane) networks. Rubber Chem. Technol. 67, 806-819 (1994)
20. Kraus, G.: J. Appl. Polym. Sci. 7, 861 (1963)
21. Mark, J.E.: Rubber Chem. Technol. 48, 495 (1975)
22. Mark, J.E., Flory, P.J.: Stress-strain isotherms for poly-(dimethylsiloxane) networks. J. Appl. Phys. 37, 4635-4639 (1966)
23. Wen, J.Y., Mark, J.E.: Sol-gel preparation of composites of poly(dimethylsiloxane) with SiO2 and SiO2/TiO2 and their mechanical properties. Polym. J. 27, 492-502 (1995)
24. Breiner, J.M., Mark, J.E.: Preparation, structure, growth mechanisms and properties of siloxane composites containing silica, titania or mixed silica-titania phases. Polymer 39, 5483-5493 (1998)
25. Wen, J.A., Mark, J.E.: Synthesis, structure, and properties of poly(dimethylsiloxane) networks reinforced by in situ-precipitated silica-titania, silica-zirconia, and silica-alumina mixed oxides. J. Appl. Polym. Sci. 58, 1135-1145 (1995)
26. Bokobza, L., Chauvin, J.P.: Reinforcement of natural rubber: use of in situ generated silicas and nanofibres of sepiolite. Polymer 46, 4144-4151 (2005)
27. Bokobza, L.: Some new developments in rubber reinforcement. Compos. Interface 13, 345-354 (2006)
28. Guth, O., Gold, E.: Phys. Rev. 53, 322 (1938)
29. Guth, O.: J. Appl. Phys. 16, 20 (1945)
30. Fragiadakis, D., Pissis, P., Bokobza, L.: Modified chain dynamics in poly(dimethylsiloxane)/ silica nanocomposites. J. Non-Cryst. Solids 352, 4969-4972 (2006)
31. Fragiadakis, D., Pissis, P., Bokobza, L.: Glass transition and molecular dynamics in poly(dimethylsiloxane)/silica nanocomposites. Polymer 46, 6001-6008 (2005)
32. Poompradub, S., Chaichua, B., Kanchanaamporn, C., et al.: Synthesis of silica in natural rubber solution via sol-gel reaction. Kgk-Kaut Gummi Kunst 61, 152-155 (2008)
33. Chaichua, B., Prasassarakich, P., Poompradub, S.: In situ silica reinforcement of natural rubber by sol-gel process via rubber solution. J. Sol-Gel Sci. Technol. 52, 219-227 (2009)
34. Ikeda, Y., Poompradub, S., Morita, Y., et al.: Preparation of high performance nanocomposite elastomer: effect of reaction conditions on in situ silica generation of high content in natural rubber. J. Sol-Gel Sci. Technol. 45, 299-306 (2008)
35. Ikeda, Y., Kameda, Y.: Preparation of "green" composites by the sol-gel process: in situ silica filled natural rubber. J. Sol-Gel Sci. Technol. 31, 137-142 (2004)
36. Poompradub, S., Kohjiya, S., Ikeda, Y.: Natural rubber/in situ silica nanocomposite of a high silica content. Chem. Lett. 34, 672-673 (2005)
37. Kohjiya, S., Murakami, K., Iio, S., et al.: In situ filling of silica onto "green" natural rubber by the sol-gel process. Rubber Chem. Technol. 74, 16-27 (2001)
38. Murakami, K., Iio, S., Tanahashi, T., et al.: Reinforcement of NR by silica generated in situ: comparison with carbon black stock. Kaut Gummi Kunstst 54, 668-672 (2001)
39. Murakami, K., Iio, S., Ikeda, Y., et al.: Effect of silane-coupling agent on natural rubber filled with silica generated in situ. J. Mater. Sci. 38, 1447-1455 (2003)
40. Kohjiya, S., Ikeda, Y.: In situ formation of particulate silica in natural rubber matrix by the sol-gel reaction. J. Sol-Gel Sci. Technol. 26, 495-498 (2003)
41. Kohjiya, S., Kato, A., Ikeda, Y.: Visualization of nanostructure of soft matter by 3D-TEM: nanoparticles in a natural rubber matrix. Prog. Polym. Sci. 33, 979-997 (2008)
42. Kohjiya, S., Katoh, A., Shimanuki, J., et al.: Three-dimensional nano-structure of in situ silica in natural rubber as revealed by 3D-TEM/electron tomography. Polymer 46, 4440-4446 (2005)
43. Tangpasuthadol, V., Intasiri, A., Nuntivanich, D., et al.: Silica-reinforced natural rubber prepared by the sol-gel process of ethoxysilanes in rubber latex. J. Appl. Polym. Sci. 109, 424-433 (2008)
44. Siramanont, J., Tangpasuthadol, V., Intasiri, A., et al.: Sol-gel process of alkyltriethoxysilane in latex for alkylated silica formation in natural rubber. Polym. Eng. Sci. 49, 1099-1106 (2009)
45. Bandyopadhyay, A., De Sarkar, M., Bhowmick, A.K.: Epoxidized natural rubber/silica nanoscale organic-inorganic hybrid composites prepared by sol-gel technique. Rubber Chem. Technol. 77, 830-846 (2004)
46. Bandyopadhyay, A., Maiti, M., Bhowmick, A.K.: Synthesis, characterisation and properties of clay and silica based rubber nanocomposites. Mater. Sci. Tech.-Lond. 22, 818-828 (2006)
47. Bandyopadhyay, A., De Sarkar, M., Bhowmick, A.K.: Polymer-filler interactions in sol-gel derived polymer/silica hybrid nanocomposites. J. Polym. Sci. Polym. Phys. 43, 2399-2412 (2005)
48. Bandyopadhyay, A., De Sarkar, M., Bhowmick, A.K.: Structure-property relationship in sol-gel derived polymer/silica hybrid nanocomposites prepared at various pH. J. Mater. Sci. 41, 5981-5993 (2006)
49. Hashim, A.S., Kohjiya, S., Ikeda, Y.: Moisture cure and in situ silica reinforcement of epoxidized natural-rubber. Polym. Int. 38, 111-117 (1995)
50. Hashim, A.S., Kawabata, N., Kohjiya, S.: Silica reinforcement of epoxidized natural rubber by the sol-gel method. J. Sol-Gel Sci. Technol. 5, 211-218 (1995)
51. Messori, M., Bignotti, F., De Santis, R., et al.: Modification of isoprene rubber by in situ silica generation. Polym. Int. 58, 880-887 (2009)
52. Huber, G., Vilgis, T.A.: Universal properties of filled rubbers: mechanisms for reinforcement on different length scales. Kaut Gummi Kunstst 52, 102-107 (1999)
53. Messori, M., Fiorini, M.: In situ formation of silica particles in isoprene rubber by the sol-gel method. J. Sol-Gel Sci. Technol. (2010, submitted)
54. Ikeda, Y., Tanaka, A., Kohjiya, S.: Reinforcement of styrene-butadiene rubber vulcanizate by in situ silica prepared by the sol-gel reaction of tetraethoxysilane. J. Mater. Chem. 7, 1497-1503 (1997)
55. Ikeda, Y., Tanaka, A., Kohjiya, S.: Effect of catalyst on in situ silica reinforcement of styrene-butadiene rubber vulcanizate by the sol-gel reaction of tetraethoxysilane. J. Mater. Chem. 7, 455-458 (1997)
56. Hashim, A.S., Azahari, B., Ikeda, Y., et al.: The effect of bis(3-triethoxysilylpropyl)tetrasulfide on silica reinforcement of styrene-butadiene rubber. Rubber Chem. Technol. 71, 289-299 (1998)
57. de Luca, M.A., Jacobi, M.M., Orlandini, L.F.: Synthesis and characterisation of elastomeric composites prepared from epoxidised styrene butadiene rubber, 3-aminopropyltriethoxysilane and tetraethoxysilane. J. Sol-Gel Sci. Technol. 49, 150-158 (2009)
58. de Luca, M.A., Machado, T.E., Notti, R.B., et al.: Synthesis and characterization of epoxidized styrene-butadiene rubber/silicon dioxide hybrid materials. J. Appl. Polym. Sci. 92, 798-803 (2004)
59. De, D., Das, A., Panda, P.K., et al.: Reinforcing effect of silica on the properties of styrene butadiene rubber-reclaim rubber blend system. J. Appl. Polym. Sci. 99, 957-968 (2006)
60. Tanahashi, H., Osanai, S., Shigekuni, M., et al.: Reinforcement of acrylonitrile-butadiene rubber by silica generated in situ. Rubber Chem. Technol. 71, 38-52 (1998)
61. Murakami, K., Osanai, S., Shigekuni, M., et al.: Silica and silane coupling agent for irt situ reinforcement of acrylonitrile-butadiene rubber. Rubber Chem. Technol. 72, 119-129 (1999)
62. Ikeda, Y., Kohjiya, S.: In situ formed silica particles in rubber vulcanizate by the sol-gel method. Polymer 38, 4417-4423 (1997)
63. Zhou, D.H., Mark, J.E.: Preparation and characterization of trans-1,4-polybutadiene nanocomposites containing in situ generated silica. J. Macromol. Sci. Pure A41, 1221-1232 (2004)
64. Bandyopadhyay, A., Bhowmick, A.K., De Sarkar, M.: Synthesis and characterization of acrylic rubber/silica hybrid composites prepared by sol-gel technique. J. Appl. Polym. Sci. 93, 2579-2589 (2004)
65. Patel, S., Bandyopadhyay, A., Vijayabaskar, V., et al.: Effect of acrylic copolymer and terpolymer composition on the properties of in situ polymer/silica hybrid nanocomposites. J. Mater. Sci. 41, 927-936 (2006)
66. Patel, S., Bandyopadhyay, A., Vijayabaskar, V., et al.: Effect of microstructure of acrylic copolymer/terpolymer on the properties of silica based nanocomposites prepared by sol-gel technique. Polymer 46, 8079-8090 (2005)
67. Das, A., Jurk, R., Stockelhuber, K.W., et al.: Silica-ethylene propylene diene monomer rubber networking by in situ sol-gel method. J. Macromol. Sci. Part A-Pure Appl. Chem. 45, 101-106 (2008)
68. Matêjka, L., Dukh, O., Kolarik, J.: Reinforcement of crosslinked rubbery epoxies by in situ formed silica. Polymer 41, 1449-1459 (2000)
69. Matêjka, L., Dusek, K., Plestil, J., et al.: Formation and structure of the epoxy-silica hybrids. Polymer 40, 171-181 (1999)
70. Sunada, K., Takenaka, K., Shiomi, T.: Synthesis of polychloroprene-silica composites by sol-gel method in the presence of modified polychloroprene containing triethoxysilyl group. J. Appl. Polym. Sci. 97, 1545-1552 (2005)
71. Wu, C.S., Liao, H.T.: Modification of polyethylene-octene elastomer by silica through a sol-gel process. J. Appl. Polym. Sci. 88, 966-972 (2003)
72. Wu, C.S.: Synthesis of polyethylene-octene elastomer/SiO2-TiO2 nanocomposites via in situ polymerization: properties and characterization of the hybrid. J. Polym. Sci. Polym. Chem. 43, 1690-1701 (2005)
73. Lai, S.M., Wang, C.K., Shen, H.F.: Properties and preparation of thermoplastic polyurethane/ silica hybrid using sol-gel process. J. Appl. Polym. Sci. 97, 1316-1325 (2005)
74. Lai, S.M., Liu, S.D.: Properties and preparation of thermoplastic polyurethane/silica hybrids using a modified sol-gel process. Polym. Eng. Sci. 47, 77-86 (2007)