Investigation of early hydration of high aluminate cement-based binder at different ambient temperatures

Journal of Thermal Analysis and Calorimetry

Volumn 109, Issue 2, 2012, Pages 717-726

  Pacewska, Barbara ^a   Nowacka, Mariola ^a   Antonovič, Valentin ^b   Aleknevičius, Marius ^b  

^a WARSAW UNIVERSITY OF TECHNOLOGY   (Poland)

^b VILNIUS GEDIMINAS TECHNICAL UNIVERSITY   (Lithuania)

Author keywords

Calorimetry; Curing temperature; High aluminate cement; Hydration; Spent FCC catalyst

Indexed keywords

ALUMINATE CEMENT; CALORIMETRIC MEASUREMENTS; CEMENT HYDRATION; CEMENT PASTE; CEMENT-BASED; CONSTANT RATIO; CURING TEMPERATURE; HYDRATION KINETICS; HYDROGARNET; MINERAL ADDITION; RETARDING AGENT; SPENT CATALYST; SPENT FCC CATALYSTS; TEMPERATURE CONDITIONS; WASTE CATALYSTS;

ALUMINOSILICATES; BINDERS; CALORIMETRY; CATALYSTS; CEMENTS; CURING; HARDENING; NANOCOMPOSITES; TEMPERATURE; THERMOANALYSIS;

HYDRATION;

EID: 84864580702     PISSN: 13886150     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10973-012-2233-6     Document Type: Conference Paper

References (28)

1. Lee WE, Vieira W, Zhang S, Ahari KG, Sarpoolaky H, Parr C. Castable refractory concretes. Int Mater Rev. 2001;46(3):145-67.
2. Scrivener KL, Capmas A. Calcium aluminate cements, Chap 13. In: Hewlett PC, editor. Lea's chemistry of cement and concrete. New York: Wiley; 1998. p. 709-78.
3. Antonovic V, Pundiene I, Stonys R, C Eesniene J, Keriene J. A review of the possible applications of nanotechnology in refractory concrete. J Civ Eng Manag. 2010;16(4):595-602.
4. Parr C. Calcium aluminate cement-what happens when things go wrong. In: Technical Paper IRE annual conference, 2008, vol. 33, pp 1-11.
5. Bensted J. Scientific aspects of high alumina cement. Cem Lime Concr. 2004;3:109-33.
6. Smith A, Chotard T, Gimet-Breart N, Fargeot D. Correlation between hydration mechanism and ultrasonic measurements in an aluminous cement: effect of setting time and temperature on the early hydration. J Eur Ceram Soc. 2002;22:1947-58.
7. Heikal M, Morsy MS, Radwan MM. Electrical conductivity and phase composition of calcium aluminate cement containing aircooled and water-cooled slag at 20, 40 and 60-C. Cem Concr Res. 2005;35:1438-46.
8. Taylor HFW. Cement chemistry. London: Thomas Telford; 1998.
9. Hidalgo A, Garcia JL, Alonso CM, Fernandez L, Andrate C. Microstructure development in mixes of calcium aluminate cement with silica fume or fly ash. J Therm Anal Calorim. 2009;96(2):335-45.
10. Pacewska B, Nowacka M, Wilińska I, Kubissa W, Antonovic V. Studies on the influence of spent FCC catalyst on hydration of calcium aluminate cements at ambient temperature. J Therm Anal Calorim. 2011;105(1):129-40.
11. Payá J, Monzó J, Borrachero MV. Fluid catalytic cracking catalyst residue (FC3R). An excellent mineral by-product for improving early-strength development of cement mixtures. Cem Concr Res. 1999;29:1773-9.
12. Pacewska B, Bukowska M, Wilińska I, Swat M. Modification of the properties of concrete by a new pozzolan-a waste catalyst from the catalytic process in a fluidized bed. Cem Concr Res. 2002;32:145-52.
13. Garća de Lomas M, Sánchez de Rojas MI, Fŕas M. Pozzolanic reaction of a spent fluid catalytic cracking catalyst in FCCcement mortars. J Therm Anal Calorim. 2007;90(2):443-7.
14. Pinto CA, Büchler PM, Dweck J. Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration Evaluation by thermal analysis. J Therm Anal Calorim. 2007;87(3):715-20.
15. Dweck J, Pinto CA, Büchler PM. Study of a Brazilian spent catalyst as cement aggregate by thermal and mechanical analysis. J Therm Anal Calorim. 2008;92(1):121-7.
16. Payá J, Monzó J, Borrachero MV, Garcés P, Mellado A, Velázquez S, Soriano L, Zornoza E. Outstanding aspects on the use of spent FCC catalyst in binders. In: López FA, Puertas F, Alguacil FJ, Guerrero, A (eds) 1st Spanish National Conference on Advances in Materials Recycling and Eco-Energy, Madrid 2009, Paper S04-19, pp 160-163. http://digital.csic.es/handle/10261/18626.
17. Pacewska B, Wilińska I, Bukowska M. Calorimetric investigations of the influence of waste aluminosilicate on the hydration of different cements. J Therm Anal Calorim. 2009;97(1):61-6.
18. Stonys R, Pundiene I, Antonovic V, Goberis S, Aleknevicius M. The effect of waste oil-cracking catalyst on the properties of MCC-type castable. Mater Sci. 2008;14(1):59-62.
19. Pacewska B, Wilińska I, Nowacka M, Pundiene I, Aleknevicius M. Studies on the influence of aluminosilicate additive on initiation steps of high calcium aluminate cement hydration. In: 10th International Conference Modern Building Materials, Structures and Techniques, Vilnius, 2010, vol 1, pp 228-233.
20. Aleknevicius M, Antonovic V. Calorimetric investigations of high aluminate cement hydration in the presence of waste oilcracking catalyst. Chem Technol. 2009;2(51):33-8.
21. Information of Górkal cement producer. www.gorka.com.pl.
22. Gawlicki M, Nocuń-Wczelik W, Bak R. Calorimetry in the studies of cement hydration. Setting and hardening of Portland cement-calcium aluminate cement mixtures. J Therm Anal Calorim. 2010;100(2):571-6.
23. Lou W, Guan B, Wu Z. Calorimetric study of ternary binder of calcium aluminate cement, Portland-limestone cement and FGD gypsum. J Therm Anal Calorim. 2010;101(1):119-27.
24. Pacewska B, Wilińska I, Nowacka M. Studies on the influence of different fly ashes and Portland cement on early hydration of calcium aluminate cement. J Therm Anal Calorim. 2011;106(3): 859-68.
25. Oliveira IR, Pandolfelli VC. Castable matrix, additives and their role on hydraulic binder hydration. Ceram Int. 2009;35:1453-60.
26. Bushnell-Watson SM, Sharp JH. On the cause of the anomalous setting behaviour with respect to temperature of calcium aluminate cements. Cem Concr Res. 1990;20(5):677-86.
27. Snellings R, Mertens G, Elsen J. Calorimetric evolution of the early pozzolanic reaction of natural zeolites. J Therm Anal Calorim. 2010;101(1):97-105.
28. Hidalgo LA, Garcia JL, Garcia OJ, Petit S, Alonso CM. Microstructural evolution of calcium aluminate cements hydration with silica fume and fly ash additions by scanning electron microscopy, and mid and near-infrared spectroscopy. J Am Ceram Soc. 2008;91(4):1258-65