Pavement engineering materials: Review on the use of warm-mix asphalt

Construction and Building Materials

Volumn 36, Issue , 2012, Pages 1016-1024

  Capitao S D ^a   Picado Santos, L G ^b   Martinho, F ^b,c  

^a UNIVERSITY OF COIMBRA   (Portugal)

^b INSTITUTO SUPERIOR TÉCNICO   (Portugal)

^c FM Consulting   (Portugal)

Author keywords

Additives; Asphalt pavements; Fatigue resistance; Foam bitumen; Hot mix asphalt; Life cycle analysis; Mix design; Rutting; Stiffness modulus; Warm mix asphalt

Indexed keywords

HOT MIX ASPHALT; LIFE CYCLE ANALYSIS; MIX DESIGNS; RUTTING; STIFFNESS MODULI; WARM-MIX ASPHALTS;

ADDITIVES; ASPHALT PAVEMENTS; ENVIRONMENTAL TECHNOLOGY; FATIGUE OF MATERIALS; HIGHWAY ENGINEERING; LIFE CYCLE;

ASPHALT;

EID: 84864445480     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2012.06.038     Document Type: Review

References (53)

1. Olard F, Noan C. Low energy asphalts. Routes roads 336/337. PIARC (World Road Association); 2008. p. 131-45.
2. EAPA. The use of warm mix asphalt - EAPA position paper. Brussels: European Asphalt Pavement Association; 2010.
3. Zaumanis M. Warm mix asphalt investigation. Master of science thesis. Kgs.Lyngby: Technical University of Denmark in cooperation with the Danish Road Institute, Department of Civil Engineering; 2010.
4. Button J, Estakhri C, Wimsatt A. A synthesis of warm-mix asphalt. Report FHWA/TX-07/0-5597-1. Texas: Texas Transportation Institute; 2007.
5. D'Angelo J, Harm E, Bartoszek J, Baumgardner G, Corrigan M, Cowsert J, et al. Warm-mix asphalt: European practice. FHWA, AASHTO, NCHRP. Report no. FHWA PL-08-007, Alexandria; 2008.
6. Jullien A, Baudru Y, Tamagny P, Olard, F, Zavan, D. A comparison of environmental impacts of hot and warm mix asphalt. Routes roads 350. PIARC (World Road Association); 2011. p. 81-5.
7. Kristjansdottir O, Michael L, Muench S, Burke G. Assessing the potential for warm mix asphalt technology adoption. In: Proceedings of the 86th annual meeting of the transportation research board. Washington DC(USA): National Academy of Sciences; 2007 [referred to in [4]].
8. Prowell B, Hurley G, Frank B. Warm-mix asphalt: best practices. Lanham (MD): NAPA - National Asphalt Pavement Association; 2011.
9. Gandhi T. Effects of warm asphalt additives on asphalt binder and mixture properties. PhD thesis. Clemson: Clemson University, Department of Civil Engineering; 2008.
10. Sasol. Sasobit. Sasol wax; 2012. < http://www.sasolwax.us.com/sasobit. html > [accessed 16.01.12].
11. Hurley G, Prowell B. Evaluation of Sasobit® for use in warm mix asphalt. NCAT report 05-06. Auburn: Auburn University; 2005.
12. Shell. Thiopave; 2012. < http://www.shell.com/home/content/sulphur > [accessed 16.01.12].
13. Al-Ansary M, Masad E, Strickland D. Sulphur sustainable applications: initial field monitoring and performance of Shell Thiopave trial toad in Qatar. In: Farid Benyahia, Fadwa Eljack, editors. Proceedings of the 2nd gas processing symposium, Doha, Qatar; 2010.
14. Silva H, Oliveira J, Peralta E, Ferreira C. Evaluation of the rheological behaviour of warm mix asphalt (WMA) modified binders. In: Proceedings of the 7th international RILEM symposium ATCBM09 on advanced testing and characterization of bituminous materials, Rhodes, Greece; 2009.
15. Hajj E, Cortez E. Evaluation of the Cecabase™ Rt warm-mix additive. Final report, September 2011. Reno (NV): Department of Civil and Environmental Engineering, College of Engineering, University of Nevada; 2011.
16. Logaraj S, Almeida A. Surface-active bitumen additive for warm mix asphalt with adhesion promoting properties. Akzo Nobel. < http://www.akzonobel.com/surface/markets/asphalt-sc/new-developments/rediset. aspx > [accessed 16.01.12].
17. NCHRP. Mix design practices for warm mix asphalt. National cooperative highway research program report 691. Washington (DC): Transportation Research Board; 2011.
18. Hurley G, Prowell B. Evaluation of Evotherm® for use in warm asphalt mixes. NCAT report 06-02. Auburn: Auburn University; 2006.
19. H. Silva, J. Oliveira, C. Ferreira, and P. Pereira Assessment of the performance of warm mix asphalts in road pavements Int J Pavement Res Tech 3 3 2010 119 127
20. M. Van de Ven, K. Jenkins, J. Voskuilen, and R. Van den Beemt Development of (half) warm foamed bitumen mixes: state of the art Int J Pavement Eng 8 2 2007 163 175
21. Jenkins K. Mix design considerations for cold and half-warm bituminous mixes with emphasis on foam bitumen. PhD thesis. Stellenbosch: University of Stellenbosch, South Africa; 2000.
22. Hurley G, Prowell B. Evaluation of Aspha-min® zeolite for use in warm mix asphalt. NCAT report 05-04. Auburn: Auburn University; 2005.
23. Kristjansdottir O. Warm mix asphalt for cold weather paving. Master of science thesis. Washington (DC): University of Washington, Department of Civil Engineering; 2006.
24. Capitão S, Picado-Santos L, Pais J. Design and evaluation of the bearing capacity of high modulus asphalt concrete by means of a performance-based approach. In: Proceedings of the third international symposium on maintenance and rehabilitation of pavements and technological, control (MAIREPAV'03), Guimarães; 2003.
25. Brown E, Buchanan M. Literature review: verification of gyration levels in the Superpave Ndesign table. NCHRP web document 34. Washington (DC): Transportation Research Board; 2001.
26. LCPC. Design of hot asphalt mixtures. LPC bituminous mixtures design guide. Nantes: Laboratoire Central des Ponts et Chaussées; 2005 [referred to in [5]].
27. E. Sanchez-Alonso, A. Vega-Zamanillo, D. Castro-Fresno, and M. DelRio-Prat Evaluation of compactability and mechanical properties of bituminous mixes with warm additives Constr Build Mater 25 2011 2304 2311 10.1016/j.conbuildmat.2010.11.024
28. H. Silva, J. Oliveira, J. Peralta, and S. Zoorob Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents Constr Build Mater 24 2010 1621 1631 10.1016/j.conbuildmat.2010.02.030
29. C. Akisetty, F. Xiao, T. Gandhi, and S. Amirkhanian Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive Constr Build Mater 25 2011 950 956 10.1016/j.conbuildmat.2010.06.087
30. Jenkins K, Mbaraga A, Van den Heever J, Van der Walt S. Flexural stiffness and fatigue properties of warm mix asphalt. In: Proceedings of the 10th conference on asphalt pavement for Southern Africa, KwaZulu-Natal, South Africa; 2011.
31. G. Airey, A. Collop, S. Zoorob, and R. Elliott The influence of aggregate, filler and bitumen on asphalt mixture moisture damage Constr Build Mater 22 2008 2015 2024
32. S. Caro, E. Masad, A. Bhasin, and D. Little Moisture susceptibility of asphalt mixtures. Part 1: Mechanisms Int J Pavement Eng 9 2 2008 81 98
33. Hossain Z, Zaman M, O'Rear E, Chen D. Laboratory evaluation of water-bearing additive for warm mix asphalt. In: Nineteenth annual meeting of the transportation research board, Washington, DC, USA; 2011.
34. F. Xiao, and S. Amirkhanian Effects of liquid antistrip additives on rheology and moisture susceptibility of water bearing warm mixtures Constr Build Mater 24 2010 1649 1655
35. Y. Kim, J. Zhang, and H. Ban Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation Constr Build Mater 31 2012 204 211
36. A. Kavussi, and L. Hashemian Properties of wma-foam mixes based on major mechanical tests J Civ Eng Manage 17 2 2011 207 216
37. Bennert T, Maher A, Sauber R. Influence of production temperature and aggregate moisture content on the performance of warm mix asphalt (WMA). In: Nineteenth annual meeting of the transportation research board, Washington, DC, USA; 2011.
38. Cardone F, Pannunzio V, Virgili A, Barbati S. An evaluation of use of synthetic waxes in warm mix asphalt. In: Proceedings of the 7th international RILEM symposium ATCBM09 on advanced testing and characterization of bituminous materials, Rhodes, Greece; 2009.
39. Partl M, Francken L. RILEM Interlaboratory tests on stiffness properties of bituminous mixtures. In: Proceedings of 5th RILEM international conference on mechanical test for bituminous materials, Lyon; 1997. p. 9-14.
40. Akisetty C. Evaluation of warm asphalt additives on performance properties of CRM binders and mixtures containing warm mix asphalt additive. PhD thesis. Clemson: Clemson University, Department of Civil Engineering; 2008.
41. Capitão S, Picado-Santos L. Laboratory fatigue performance assessment of high modulus bituminous mixtures. In: Proceedings of the 4th international symposium on maintenance and rehabilitation of pavements and technological control (MAIREPAV'04), Belfast; 2005.
42. Diefenderfer S, Hearon A. Laboratory evaluation of a warm asphalt technology for use in Virginia. FHWA/VTRC 09-R11, Virginia transportation research council, Charlottesville, VA; 2009.
43. David H, Willis J, Kvasnak A. Full-scale structural evaluation of fatigue characteristics in high RAP and warm mix asphalt. In: Nineteenth annual meeting of the transportation research board, Washington, DC, USA; 2011.
44. F. Xiao, W. Zhao, and S. Amirkhanian Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives Constr Build Mater 23 2009 3144 3151 10.1016/j.conbuildmat.2009.06.036
45. Min-Yong Y, Seung-Ho J, Ji-Yong P, Nam-Ho K, Kwang-Woo K. Low temperature fracture characteristics of selected warm-mix asphalt concretes. In: Nineteenth annual meeting of the transportation research board, Washington, DC, USA; 2011.
46. P. Das, Y. Tasdemir, and B. Birgisson Low temperature cracking performance of WMA with the use of the Superpave indirect tensile test Constr Build Mater 30 2012 643 649
47. M. Medeiros Jr, J. Daniel, H. Bolton, and W. Meagher Evaluation of moisture and low-temperature cracking susceptibility of warm-mixture asphalt Int J Pavement Eng 2011 10.1080/10298436.2011.582113
48. S. Capitão, and L. Picado-Santos Assessing permanent deformation parameters in high modulus bituminous mixtures ASCE - J Transport Eng 132 5 2006 394 401
49. Zelelew H, Paugh C, Corrigan M. Warm-mix asphalt laboratory permanent deformation performance in the State of Pennsylvania: a case study. In: Nineteenth annual meeting of the transportation research board, Washington, DC, USA; 2011.
50. Santero N, Masanet E, Horvath A. Life-cycle assessment of pavements: a critical review of existing literature and research. SN3119a. Illinois: Portland Cement Association; 2010.
51. K. Park, Y. Hwang, S. Seo, and H. Seo Quantitative assessment of environmental impacts on life cycle of highways J Constr Eng Manage Am Soc Civ Eng 129 1 2003 25 31
52. Y. Huang, R. Bird, and O. Heidrich Development of a life cycle assessment tool for construction and maintenance of asphalt pavements J Clean Prod 17 2009 283 296
53. Wayman M, Schiavi-Mellor I, Cordell B. Further guidance to accompany the protocol for the calculation of life-cycle greenhouse gas emissions generated by asphalt used in highways. Part of the asphalt Pavement Embodied Carbon Tool (asPECT). Final project report. Transport Research Laboratory; 2009.