A review of experimental study of turbulent heat transfer in separated flow

Australian Journal of Basic and Applied Sciences

Volumn 5, Issue 10, 2011, Pages 489-505

  Togun, Hussein ^a   Kazi, S N ^a   Badarudin, Ahmed ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Bluff plates; Facing step; Ribs channel; Separation flow; Sudden expansion; Swirl generators

Indexed keywords

EID: 84864428921     PISSN: 19918178     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (111)

1. Abu-Mulaweh, H.I., 2002. Effects of backward-and forward facing steps on turbulent natural convection flow along a vertical flat plate. Int. J. Therm. Sci., 41(4): 376-385.
2. Abu-Mulaweh, H.I., 2005. Turbulent mixed convection flow over a forward-facing-step the effect of step heights. International Journal of Thermal Sciences, 44: 155-162.
3. Abu-Mulaweh, H.I., T.S. Chen and B.F. Armaly, 2002. Turbulent mixed convection flow over a backwardfacing step-the effect of the step heights. Int. J. Heat Fluid Flow., 23(6): 758-765.
4. Ahan, S.W., Y.P. Lee and K. C Kim, 1993. Turbulent fluid flow and heat transfer in a concentric annuli with square-ribbed surface roughness. J. of KSME (B).17(5): 1297-1303.
5. Ahmadvand, M., A.F. Najafi and S. Shahidinejad, 2010. An experimental study and CFD analysis towards heat transfer and fluid flow characteristics of decaying swirl pipe flow generated by axial vanes. J. Meccanica., 45. 111-129.
6. Ahmadvand, M., A.F. Najafi and S. Shahidinejad, 2010. An experimental study and CFD analysis towards heat transfer and fluid flow characteristics of decaying swirl pipe flow generated by axial vanes. J. Meccanica., 45: 111-129.
7. Akhilesh, P., Rallabandi, Dong-Ho Rhee, Zhihong Gao, Je-Chin Han, 2010. Heat transfer enhancement in rectangular channels with axial ribs or porous foam under through flow and impinging jet. Int. J. Heat and Mass Transfer, 53: 4663-4671.
8. Alemasov, V.E., G.A. Glebov and A.P. Kozlov, 1989. Thermo-anemometric methods for studying flows with separation. Kazan'Branch of the USSR Academy of Sciences, Kazan, (1989)1-178.
9. Ali M., Jawarneh, 2007. Heat transfer enhancement in swirl annulus flows. 5th Wseas int. Conf. on Environment, Ecosystems and Development, Tenerife, Spain, December (2007) pp: 14-16.
10. Baughn, J.W., M.A. Hoffman, B.E. Launder, D. Lee and C. Yap, 1989. Heat transfer, temperature, and velocity measurements downstream of an abrupt expansion in a circular tube at a uniform wall temperature. J Heat Transfer, 111: 870-876.
11. Baughn, J.W., M.A. Hoffman, D. Lee and C. Yap, 1987a. Turbulent velocity and temperature profiles downstream of an abrupt expansion in a circular duct with a constant wall temperature. In the Proceedings of the 1986a ASME-JSME Thermal Eng Conference, pp: 449-454.
12. Baughn, J.W., M.A. Hoffman, R.K. Takahashi and B.E. Launder, 1984. Local heat transfer downstream of an abrupt expansion in a circular channel with constant wall heat flux. J Heat Transfer, 106: 789-796.
13. Baughn, J.W., M.A. Hoffman, R.K. Takahashi and D. Lee, 1987b. Heat transfer downstream of an abrupt expansion in the transition Reynolds number regime. J. Heat Transfer, 109: 37-42.
14. Baughn, J.W., R.K. Takahashi, M.A. Hoffman and A.A. McKillop, 1985. Local heat transfer measurements using an electrically heated thin gold-coated plastic sheet. J Heat Transfer, 107: 953-959.
15. Bellows, W.J. and R.E. Mayle, 1986. Heat transfer downstream of a leading edge separation bubble. J. Turbomachinery, 108: 131-136.
16. Blackwelder, R. and F. Kreith, 1970. An experimental investigation of heat transfer and pressure drop in a decaying swirl flow. In: Augmentation of convective heat and mass. ASME: 102-108.
17. Boelter, L.M.K., G. Young and H.W. Iversen, 1984. An investigation of Aircraft Heaters XXVII-Distribution of heat transfer rate in the entrance section of a circular tub. NACA-TN-1451.
18. Chandra, P.R., C.R. Alexander and J.C. Han, 2003. Heat transfer and friction behaviors in rectangular channels with varying number of ribbed walls. Int. J. Heat Mass Transfer, 46(3): 481-495.
19. Chandra, P.R., M.E. Niland and J.C. Han, 1997. Turbulent flow heat transfer and friction in a rectangular channel with varying numbers of ribbed walls Journal of Turbomachinery, 119: 374-380.
20. Chang, T.H., 2003. An investigation of heat transfer characteristics of swirling flow in a 180 degrees circular section bend with uniform heat flux. KSME Int. J. 17(10): 1520-1532.
21. Cooper, PI., J.C. Sheridan, C.J. Flood and M.C. Welsh, 1986. The effect of sound on forced convection from a flat plate. 8th Australasian Fluid Mech. Conf, Univ. of NSW.
22. Dae hee lee, Jun Sik Lee, Hyun Jin Park and Moon Kyung Kim, 2011. Experimental and numerical study of heat transfer downstream of an axisymmetric abrupt expansions and in a cavity of a circular tube. Journal of Mechanical Science and Technology, 25(2): 395-401.
23. De Zilwa S.R., S. Sivasegaram and J.H. Whitelaw, 1997. Active control of isothermal and combusting flows in plane sudden-expansions. Proc. 1997 Transport Phenomena in Thermal Sci and Process Eng. pp: 325-330.
24. Dyban, E.P., E.Y. Epik and L.E. Yushina, 1994. Heat transfer on the surface of longitudinally streamlined bodies in the presence of closed separation and external flow turbulization. Heat Transfer, 4EC7: 25-30
25. Ede, AJ., C.I. Hislop and R. Morris, 1956. Effect of the local heat transfer coefficient in a pipe of an abrupt disturbance of the fluid flow: abrupt convergence and divergence of diameter ratio 2:1. Proc Inst Mech Engrs., 170: 1113-1130.
26. Ehsan Shoukry and Leslie W. Shemilt, 1985. Mass transfer enhancement in swirling annular pipe flow. J. Ind. Eng. Chem. Process Des. Dev., 24(1): 53-56.
27. Eiamsa-ard, S., 2010. Study on thermal and fluid flow characteristics in turbulent channel flows with multiple twisted tape vortex generators. International Communications in Heat and Mass Transfer, 31: 644-651.
28. El-Shazly, K.M., A.E. Zohir, A.A. Abdel Aziz and M. Abdel Mohiomen, 2005. Heat transfer characteristics of pulsated flow downstream of abrupt expansion through pipes, In. 2nd International conference on advanced in Engineering science and Technologies, National research center, pp: 12-14.
29. Filetti, E.G. and W.M. Kays, 1967. Heat transfer in separated, reattached and redeveloped regions behind a double step at entrance to flat duct. Journal of Heat transfer, 89: 163-168.
30. Gau, C. and H.R. Chen, 1998. Enhancement of heat transfer with swirling flows issued into a divergent pipe. Journal of Thermophysics and Heat Transfer, 12 (1): 87-93.
31. Gul, H., 2006. Enhancement of heat transfer in a circular tube with tangential swirl generators. J. Exp Heat Transfer 19: 81-93.
32. Habib, M.A., A.M. Attya and M.M. Khalifa, 1992. Measurements of augmented heat transfer downstream of an abrupt rectangular channel expansion. J. Modeling, Measurement & Control B, 44(1): 33-46.
33. Habib, M.A., A.M. Mobarak, A.E. Attya and A. Aly, 1992. An experimental investigation of heat transfer and flow in channels with streamwise-periodic flow. Journal of Energy, 17(11): 1049-1058.
34. Habib, M.A., A.M. Mobarak, E. Abdel-Hafez, M. El-Sallak and R. Affify, 1994. Experimental investigation of heat transfer and flow over baffles of different heights. ASME J. Heat Transfer, 116: 363-368.
35. Han, J.C. and J.S. Park, 1988. Developing heat transfer in rectangular channels with rib-turbulators. Int. J. Heat Mass Transfer, 31: 183-195.
36. Han, J.C., 1984. Heat transfer and friction in channels with two opposite rib-roughened walls. Journal of heat transfer, 106: 774-781.
37. Han, J.C., Y.M. Zhang and C.P. Lee, Augmented heat transfer in square channel with parallel, crossed, and V-shaped angled ribs. Journal of Heat Transfer, 113: 590-596.
38. Henze, M., J. Von Wolfersdorf, B. Weigand, C.F. Dietz and S.O. Neumann, 2011. Flow and heat transfer characteristics behind vortex generators-a benchmark dataset. Int. J. Heat and Fluid Flow, 32(1): 318-328.
39. Hourigan, K., L.W. Welch, M.C. Thompson, P.I. Cooper and M.C. Welsh, 1991. Augmented forced convection heat transfer in separated flow around a blunt flat plate. Exp Thermal Fluid Sci., 4: 182-191.
40. Hussein Togun, Y.K., Salman, Hakim, S. Sultan Aljibori and S.N. Kazi, 2011. An experimental study of heat transfer to turbulent separation fluid flow in an annular passage. Int. J. Heat and Mass Transfer, 54: 766-773.
41. Iguchi, M. and T. Sugiyama, 1988. Study on the flow near the wall of the larger pipe, downstream of a sudden expansion. Trans JSME B, 54(507): 3010-3015.
42. Isak Kotcioglu, Teoman Ayhan, Hayati Olgun, Betul Ayhan, 1998. Heat transfer and flow structure in a rectangular channel with wing-type vortex generator. J. of Engineering and Environmental Science, 22: 185-195.
43. Jing-Tang, Yang and Chun-Hung, Tsai, 1996. High temperature heat transfer of separated flow over a sudden expansion with base mass injection. Int. J. Heat Mass Transfer, 39: 2293-2301.
44. Jungho Choi, 2004. An experimental investigation of turbine blade heat transfer and turbine blade trailing edge cooling. PhD Thesis, Texas A&M University.
45. Kawamura, T., A. Yamamori, J. Mimatsu and M. Kumada, 1991. Time and spatial characteristics of heat transfer at the reattachment region of a two-dimensional backward-facing step. Proc. of the 1991 ASME-JSME Thermal Eng Conf.3 pp: 197-204
46. Kawamura, T., S. Tanaka, I. Mabuchi and M. Kumada, 1987-88. Temporal and spatial characteristics of heat transfer at the reattachment region of a backward-facing step. Exp Heat Transfer, X: 299-313.
47. Khezzar, L., D.E. Zilwa and J.H. Whitelaw, 1999. Combustion of premixed fuel and air downstream of a plane sudden-expansion. J. Experiments in Fluids, 27(4): 296-809
48. Kidd, J.R.G.C., 1969. Heat transfer and pressure drop for nitrogen flowing in tubes containing twisted tapes. AIChE J. 15: 581-585.
49. Kittisak Yongsiri, Smith Eiamsaard, Chinaruk Thianpong and Pongjet Promvonge, 2006. Effect of turbulent decaying swirl flow on heat transfer enhancement in a tube. The 2nd Joint International Conference on Sustainable Energy and Environment Bangkok, Thailand.
50. Koram, K.K. and E.M. Sparrow, 1978. Turbulent heat transfer downstream of an unsymmetric blockage in a tube. J. Heat Transfer, 100: 588-594.
51. Krall, K.M. and E.M. Sparrow, 1966. Turbulent heat transfer in the separated, reattachment, and redevelopment regions of a circular tube. J Heat Transfer, 88: 131-136.
52. Lei Wang and Bengt Sundén, 2007. Experimental investigation of local heat transfer in a square duct with various-shaped ribs. Journal Heat and Mass Transfer, 43: 759-766.
53. Mabuchi, I., T. Murata and M. Kumada, 1986. Effect of free-stream turbulence on heat transfer characteristics in the reattachment region on the bottom surface of a backward-facing step (For different angles of separation). Trans JSME B52: 2619-2625.
54. McCormick, D.C., R.C. Lessman and F.L. Test, 1984. Heat transfer to separated flow regions from a rectangular prism in a cross stream. J. Heat Transfer, 106: 276-283.
55. Mehendale, AB., J.C. Han and S. Ou, 1991. Influence of high mainstream turbulence on leading edge heat transfer. J. Heat Transfer, 113: 843-850.
56. Mori, Y., Y. Uchida and K. Sakai, 1986. A study of the time and spatial micro-structure of heat transfer performance near the reattaching point of separated flows. Trans JSME B52: 3353-3361.
57. Ohori Yuki, Nakamura Atsuhito, Yoshikawa Hiroyuki and Ota Terukazu, 2004. Turbulent Heat Transfer in a Symmetric Sudden Expansion Channel. Proceedings of the Thermal Engineering Conference, pp: 409-410.
58. Ota, T. and H. Kato, 1991. Turbulent heat transfer in a separated and reattached flow over a blunt flat plate. Proc. of the 1991 ASME-JSME Thermal Eng Conf, 3 pp:191-196.
59. Ota, T. and H. Nishiyama, 1987. A correlation of maximum turbulent heat transfer coefficient in reattachment flow region. Int. J. Heat Mass Transfer, 30: 1193-1200.
60. Ota, T. and N. Kon, 1974. Heat transfer in the separated and reattachment flow and a blunt flat plate. Journal of heat Transfer, 96: 459-462.
61. Ota, T. and N. Kon, 1977. Heat transfer in an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder. J. Heat Transfers, 99: 155-157.
62. Ota, T. and N. Kon, 1980. Turbulent transfer of momentum and heat in a separated and reattached flow over a blunt flat plate. J. Heat Transfer, 102: 749-754.
63. Ota, T. and N. Ohi, 1995. Turbulent heat transfer in a separated and reattached flow over a blunt flat plate. Proc of the 1995 ASME-JSME Thermal Eng Conf, pp: 363-370
64. Ota, T., N. Kon and S. Kikuchi, 1980. Temperature and velocity fields in the separated and reattached flow over blunt flat plates. Bull JSME 23: 402-408.
65. Ota, T., N. Kon, S. Hatakeyama and S. Sato, 1980. Measurements of turbulent shear stress and heat flux in an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder. Bull JSME 23: 1639-1645.
66. Ota, T., N. Nakamura and T. Hirayama, 1995. Turbulent separated and reattached flow around an inclined downward step. Turbul. Heat Mass Transfer, 1: 286-293.
67. Oyakawa, K., I. Teruya, I. Senaha, M. Yaga and I. Mabuchi, 1996. Evaluation of thermal performance on heat transfer enhancement by passive and active methods at downstream region of backward-facing step. Trans JSME B62: 1104-1110.
68. Oyakawa, K., T. Saitoh, I. Teruya and I. Mabuchi, 1995. Heat transfer enhancement using slat at reattachment region downstream of backward facing step. Trans JSME B61: 4426-4431.
69. Oyakawa, K., T. Taira and E. Yamazato, 1994. Studies of heat transfer control by jet discharge at reattachment region downstream of a backward facing step. Trans JSME B60: 248-254.
70. Paisarn Naphon, 2006. Heat transfer and pressure drop in the horizontal double pipes with and without twisted tape insert. International Communications in Heat and Mass Transfer, 33: 166-175
71. Pongjet Promvonge, Teerapat Chompookhama, Sutapat Kwankaomenga and Chinaruk Thianponga, 2010. Enhanced heat transfer in a triangular ribbed channel with longitudinal vortex generators. Energy Conversion and Management., 5: 1242-1249.
72. Rong Fung Haung, Shyy Woei Chang, Kun-Hung Chen, 2007. Flow and heat transfer characteristics in rectangular channels with staggered transverse ribs on two opposite walls. Journal of Heat Transfer, 129: 1732-1736.
73. Runchal, A.K., 1976. Mass transfer investigation in turbulent flow downstream of sudden enlargement of a circular pipe for very high Schmidt numbers. Int. J. Heat Mass Transfer, 14: 781-792.
74. Salman, Y.K. and A.A. Abdul-Rissole, 1992. Turbulent heat transfer measurement in external separation and reattached flows. Eng and Technology Journal, 4: 15-27.
75. Sang-Kyu, Park and Terukazu, Ota, 2010. An experimental approach to turbulent heat transfer using symmetric expanded plane channel. J. Mechanical science and Technology, 24(4): 857-863.
76. Sano Masatoshi, Suzuki Ippei and Sakuraba Kenichiro, 2009. Control of turbulent channel flow over a backward-facing step by suction. Journal of Fluid Science and Technology, 4(1): 188-199.
77. Seban, R.A., 1966. The effect of suction and injection on the heat transfer and flow in a turbulent separated air flow. Transaction of the ASME: 276-284.
78. Seban, R.A., A. Emery and A. Levy, 1959. Heat transfer to separated and reattached subsonic turbulent flows obtained downstream of a surface step. J. Aerospace Sci., 2: 809-814.
79. Seki, N., S. Fukusako and T. Hirata, 1976. Effect of stall length on heat transfer in reattachment region behind a double step at entrance to an enlarged flat duct. Int. J. Heat Mass Transfer, 19: 700-702.
80. Seki, N., S. Fukusako and T. Hirata, 1976. Turbulent fluctuations and heat transfer for separated flow associated with a double step at entrance to an enlarged flat duct. ASME J. Heat Transfer, 98: 588-593.
81. Smith Eiamsaard, Chinaruk, Thianpong and Pongjet Promvonge, 2006. Experimental investigation of heat transfer and flow friction in a circular tube fitted with regularly spaced twisted tape elements. International Communications in Heat and Mass Transfer., 33: 1225-1233.
82. Smithberg, E. and F. Landis, 1964. Friction and forced convection heat transfer characteristics in tubes with twisted tape swirl generators. J. Heat Trans, Trans ASME, 86: 39-49.
83. Smyth, R., 1974. Heat transfer in turbulent separated flow. Journal of Nuclear Science and Technology 1(12): 545-553.
84. Sogin, H.H., 1964. A summary of experiments on local heat transfer from the rear of bluff obstacle to a law speed Air stream. J. of heat transfer ASME Trans., 86: 200-202.
85. Solnordal, C.B. and N.B. Gray, 1994. An experimental study of fluid flow and heat transfer in decaying swirl through a heated annulus Experiments in Fluids., 18: 17-25.
86. Soong, C.Y. and W.C. Hsueh, 1993. Mixed convection in a suddenly-expanded channel with effects of cold fluid injection. Int. J. Heat and Mass Transfer., 36: 1477-1484.
87. Sorensen, A., 1969. Mass transfer coefficients on truncated slabs. Chem. Eng Sci., 24: 1445-1460.
88. Sparrow, E.M. and A Chaboki, 1986. Swirl-affected turbulent fluid flow and heat in a circular tube. J. of Heat Transfer ASME 106: 766-773.
89. Sparrow, E.M., S.S. Kang and W. Chuck, 1987. Relation between the points of flow reattachment and maximum heat transfer for regions of flow separation. Int. J. Heat Mass Transfer, 30: 1237-1246.
90. Suzuki, H., K. Suzuki, S. Kida and T. Nakamae, 1991. Heat transfer augmentation in the region downstream of a backward-facing step (Effects of a cylinder mounted near the top comer of the step). Trans JSME S7B: 1410-1415.
91. Suzuki, K., Y.M. Kang, T. Sugimoto and T. Sato, 1982. Heat transfer in the downstream region of an orifice in a tube. Trans JSME B48: 132-140.
92. Tae-Hyun, Chang and Kwon-Soo, Lee, 2003. An experimental study on heat transfer characteristics with turbulent swirling flow using uniform heat flux in a cylindrical annuli. Journal of Mechanical Science and Technology, 17(12): 2042-2052.
93. Taslim, M.E. and C.M. Wodsworth, 1997. An experimental investigation of the rib surface-averaged heat transfer coefficient in a rib-roughened square passage. Journal of Turbomachinery, 119: 381-389.
94. Teerapat Chompookham, Chinaruk Thianpong, Sutapat Kwankaomeng and Pongjet Promvonge, 2010. Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators. Int. Communications in Heat and Mass Transfer., 37: 163-169.
95. Terekhov, V.I., N.I. Yarygina and R.F. Zhdanov, 2002. Some features of a turbulent separated flow and heat transfer behind a step and a rib 1-Flow structures. Journal of Applied Mechanics and Technical Physics, 43: 888-894.
96. Terekhov, V.I., N.I. Yarygina and R.F. Zhdanov, 2003. Heat transfer in turbulent separated flows in the presence of high free stream turbulence. Int. J. of Heat and Mass Transfer, 46: 4535-4551.
97. Terekhov, V.I., N.I. Yarygina and R.F. Zhdanov, 2003. Some features of a turbulent separated flow and heat transfer behind a step and a rib 2-Heat transfer in a separated flow. Journal of applied Mechanics and Technical Physics, 44: 522-531.
98. Terekhov, V.I., N.I. Ymygina and R.F. Zhdanov, 2003. Heat transfer in turbulent separated flows in the presence of high free-stream turbulence. International Journal of Heat and Mass Transfer, 46(2003) 4535-4551.
99. Test, F.L. and R.C. Lessmann, 1980. An experimental study of heat transfer during forced convection over a rectangular body. J. Heat Transfer, 102: 146-151.
100. Thianpong, C., T. Chompookham, S. Skullong and P. Promvonge, 2009. Thermal characterization of turbulent flow in a channel with isosceles triangular ribs, International Communications in Heat and Mass Transfer., 36: 712-717.
101. Toshiaki Kanemoto, Takashi Kubota, Haruo Ishibashi, 1992. Swirling flow in a straight draft tube with annular and rectangular cross section. 11th Australasian Fluid Mechanics Conference, pp: 14-18.
102. Tsou, F.K., S.J. Chen and W. Aung, 1991. Starting flow and heat transfer downstream of a backward-facing step. Journal of Heat Transfer., 113: 583-589.
103. Tulin Bali, Betul Ayhan Sarac, 2008. Exergy analysis of heat transfer in a turbulent pipe flow by a decaying swirl generator International Journal of Exergy, 5(1): 64-77
104. Vogel, J.C. and J.K. Eaton, 1985. Combined heat transfer and fluid dynamic measurements downstream of a backward-facing step. J. of heat transfer ASME Trans., 107: 922-929.
105. Williams, F., M.A.M. Pirie and C. Warburton, 1970. Heat transfer from surfaces roughened by ribs. in: A. Bergles R.L. Webb (Eds,) Augmentation of Heat Transfer\ ASME\ New York\ pp: 36-43.
106. Yang, C.S., D.Z. Jeng, Yaw-Jou Yang, Hong-Rong Chen and C. Gau, 2011. Experimental study of preswirl flow effect on the heat transfer process in the entry region of a convergent pipe. Experimental Thermal and Fluid Science, 35(1): 73-81.
107. Yilmaz, M., O. Comakli, S. Yapici and O. Nuri Sara, 2003. Heat transfer and friction characteristics in decaying swirl flow generated by different radial guide vane swirl generators. Energy Conversion and Management., 44: 283-300.
108. Yilmaz, M., O. Comaklia and S. Yapici, 1999. Enhancement of heat transfer by turbulent decaying swirl flow. J. Energy Conversion and Management., 40(13): 1365-1376.
109. Yilmaz, M., S. Yapici, O. Comakli and O.N. Sara, 2002. Energy correlation of heat transfer and enhancement efficiency in decaying swirl flow. Heat Mass Transfer, 38(4-5): 351-358.
110. Zemanick, P.P. and R.S. Dougall, 1970. Local heat transfer downstream of abrupt circular channel expansion. J. Heat Transfer, 92: 53-60.
111. Zohir, A.E., A.A. Abdel Aziz and M.A. Habib, 2011. Heat transfer characteristics in a sudden expansion pipe equipped with swirl generators. International Journal of Heat and Fluid flow, 32: 352-361.