The potential of oil palm trunk biomass as an alternative source for compressed wood

BioResources

Volumn 7, Issue 2, 2012, Pages 2688-2706

  Sulaiman, Othman ^a   Salim, Nurjannah ^a   Nordin, Noor Afeefah ^a   Hashim, Rokiah ^a   Ibrahim, Mazlan ^a   Sato, Masatoshi ^b  

^a Universiti Sains Malaysia   (Malaysia)

^b UNIVERSITY OF TOKYO   (Japan)

Author keywords

Compressed wood; Dimensional stability; Mechanical; Oil palm trunk; Physical; Steaming

Indexed keywords

BIOMASS; DIMENSIONAL STABILITY; FORESTRY; PALM OIL;

COMPRESSED WOODS; MECHANICAL; OIL PALM TRUNKS; PHYSICAL; STEAMING;

WOOD;

BIOMASS; COMPRESSED WOOD; DIMENSIONAL STABILITY; INFORMATION RETRIEVAL; MALAYSIA; SPECIES IDENTIFICATION; STEAMING;

ARECACEAE; ELAEIS;

EID: 84863850992     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.7.2.2688-2706     Document Type: Review

References (62)

1. Adachi, K., Inoue, M., Kannyama, K., Rowell, R. M., and Kawai, S. (2004). "Water removal of wet veneer by roller pressing," J. Wood Sci. 50, 479-83.
2. Akmar, P. F., and Kennedy, J. F. (2001). "The potential of oil and sago palm trunk wastes as carbohydrate resources," Wood Sci. Technol. 35, 467-473.
3. Basiron, Y., Jalani, B. S., and Chan, K.W. (2000). Advances in Oil Palm Research, Malaysian Palm Oil Board, Bangi. pp. 1-782, 783-1526.
4. Bekhta, P., Hiziroglu, S., and Shepelyuk, O. (2009). "Properties of plywood manufactured from compressed veneer as building material," Mater Design. 30, 947-953.
5. Bekhta, P. A., and Marutzky, R. (2007). "Reduction of glue consumption in the plywood production by using previously compressed veneer," Holz Roh Werkst 65(1), 87-8.
6. Blomberg, J., Persson, B., and Blomberg, A. (2005). "Effects of semi-isostatic densification of wood on the variation in strength properties with density," Wood Sci Technol. 39, 339-350.
7. Bustos, C.A, Escobar, W.G, Cloutier, A., Fang, C-H., and Carrasco, P.V. (2011). "Densification of wood veneers combined with oil-heat treatment. Part 3: Cell wall mechanical properties determined by nanoindentation," BioResources 7(2), 1525-1532.
8. Cai, L., Han, S., and Deng, W. (1992). "Chemical and physical changes of steam treated wood chip," J. Northeast For. Univ. 4(1), 48-52.
9. Chan, K. W., Watson, I., and Lim, K. C. (1980). "Use of oil palm waste material for increased production," In: Proc. Conference Soil Science and Agricultural Development in Malaysia, Kuala Lumpur, Malaysia, pp 213-241.
10. Corley, R. H. V., and Tinker, P. B. (2003). The Oil Palm, Fourth Ed., Blackwell Science Ltd., pp. 129-136.
11. Dwianto, W., Inoue, M., Tanaka, F., and Norimoto, M. (1996). "The permanent fixation of compressive deformation in wood by heat treatment," In: Proc. of Third Pacific Rim Bio-Based Composites Symposium, Kyoto, Japan, pp. 231-239.
12. Ebringerova, A., Kosikova, B., and Kacurakova, M. (1993). "Structural changes of hardwood lignin polysaccharide complex upon steaming," Drev Vysk 38(3), 23-29.
13. Ernst, W. M., and Fairhust, H. T. (1999). Oil Palm - The Great Crop of South East Asia, Potential, Nutrition and Management, Potash & Phospate Institute, Canada.
14. Fang, C.-H., Mariotti, N., Cloutier, A., Koubaa, A., and Blanchet, P. (2012). "Densification of wood veneers by compression combined with heat and steam," Eur. J. Wood Prod. 70, 155-163.
15. Forest Agriculture Service (2009). (www.agriculture.gov.ie/forestservice).
16. Fukuta, S., Asada, F., and Sasaki, Y. (2008). "The simultaneous tretament of compression drying and deformation fixation in the compression processing of wood," Forest Prod. J. 58(7-8), 82-88.
17. Gabrielli, C. P., and Kamke, F.A (2010). "Phenol-formaldehyde impregnation of densified wood for improved dimensional stability," Wood Sci. Technol. 44(1), 95-104.
18. Gardner, D. J., Gunnells, D. W., Wolcott, M. P., and Amos, L. (1993). "Changes in wood polymers during the pressing of wood composites," Cell: Chem. Biochem. Mater. Asp. 513-518.
19. Geimer, R. L., Mahoney, R. J., Loehnertz, S. P., and Meyer, R. W. (1985). "Influence of processing induced damage on strength of flakes and flakeboards," Forest Product Laboratory, United States Department of Agriculture, Forest Service, pp. 15.
20. Gurmit, S., Lim, K. H., Teo, L., and David, L. K. (1999). "Oil palm and the environment, a Malaysian perspective," Malaysian Oil Palm Growers' Council.
21. Hassan, K. B., Husin, M., Darus, A., and Jalani, B. S. (1997). "An estimated availability of oil palm biomass in Malaysia," PORIM Occasional Paper 37,100.
22. Hashim, R., Wan Nadhari, W. N. A., Sulaiman, O., Sato, M., Hiziroglu, S., Kawamura, F., Sugimoto, T., Tay, G.S, and Tanaka, R. (2012). "Properties of binderless particleboard panels manufactured from oil palm biomass," BioResources 7(1), 1352-1365.
23. Hashim, R., Wan Nadhari, W. N. A., Sulaiman, O., Kawamura, F., Hiziroglu, S., Sato, M., Tay, G. S., and Tanaka, R. (2011). "Characterization of raw materials and manufactured binderless particleboard from oil palm biomass," Mater. Design 1, 246-254.
24. Hata, T. (1994). "Vapor-jetting compression method," Wood Industry 49(1), 2-7.
25. Higashihara, T., Morooka, T., and Norimoto, M. (2000). "Permanent fixation of tranversly compressed wood by steaming and its mechanism," Mokuzai Gakkaishi 46(4), 291-297.
26. Hillis, W. E. (1984). "High temperature and chemical effects on wood stability," Wood Sci. Technol. 18, 281-293.
27. Hsu, W. E., Schwald, W., Schwald, J., and Shield, J. A. (1988). "Chemical and physical changes required for producing dimensionally stable wood-based composites," Wood Sci. Technol. 22, 281-289.
28. Inoue, M., Norimoto, M., Tanahashi, M., and Rowell, R. M. (1993). "Steam or heat fixation of compressed wood," Wood Fiber Sci 25(3), 224-235.
29. Inoue, M., Sekino, N., Morooka, T., and Norimoto, M. (1996). "Dimensional stabilization of wood composites by steaming. I. Fixation of compressed wood by pre-steaming," In: Proc. of Third Pacific Rim Bio-Based Composites Symposium, Kyoto, Japan, pp. 240-248.
30. Inoue, M., Sekino, N., Morooka, T., Rowell, R. M., and Norimoto, M. (2008). "Fixation of compressive deformation in wood pre-steaming," J. Trop. Forest Sci. 20(4), 273-281.
31. Kamke, F. A. (2006). "Densified radiata pine for structural composites," Ciencia y Technología 8(2), 83-92.
32. Kamke, F. A., and Casey, L. J. (1988). "Fundamentals of flakeboard manufacture: Internal-mat conditions," Forest Prod. J. 38(6), 38-44.
33. Kamke, F. A. (2008). "Viscoelastic thermal compression of wood," United States Patent US 7, 404, 422 B2 (http://www.freepatentsonline.com/7404422.html).
34. Kawai, S., Wang, Q., Sasaki, H., and Tanahashi, M. (1992). "Production of compressed laminated veneer lumber by steam pressing," In: Proc. of the Third Pacific Rim Bio-Based Composites Symposium, Kyoto, Japan, pp. 121-128.
35. Killmann, W., and Lim, S. C. (1985). "Anatomy and properties of oil palm stem," In: Proc. of The National Symposium on Oil Palm By-Products for Agro-based Industries. Kuala Lumpur, PORIM Bulletin 11, 18-42.
36. Kollmann, F. P., Kuenzi, E. W., and Stamm, A. J. (1975). Principles of Wood Science and Technology, Vol. II Wood Based Materials, Springer-Verlag New York Heidelberg, Berlin, pp. 139-149.
37. Kosikova, B., Ebringerova, A., and Kacurakova, M. (1993). "Structural changes of spruce wood lignin-polysaccharide complex upon steaming," Drev Vysk 38(2), 1-9.
38. Kultikova, E. V. (1999). "Structure and properties relationship of densified wood," MSc dissertation, Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (USA).
39. Lichtenegger, H., Reiterer, A., Stanz-Tschegg, S. E., and Fratzl, P. (1999). "Variaton of cellulose microfibril angles in softwoods and hardwoods - A possible strategy of mechanical optimization," J. Struct Biol 128, 257-269.
40. Lim, S. C., and Khoo, K. C. (1986). "Characteristics of oil palm trunk and its potential utilization," The Malaysian Forester 49, 157.
41. Malaysian Palm Oil Board Statistics, (2009). (http://www.mpob.gov.my).
42. Malaysian Palm Oil Board Statistics, (2010). (http://www.mpob.gov.my).
43. Morsig, N. (2000). "Densification of wood - The influence of hygrothermal treatment on compression of beech perpendicular to the grain," Institute of Berende Konstruktioner og Materialer, Department of structural engineering and Materials, Technical University of Denmark, 79.
44. Murai, K., Uchida, R., Okubo, A., and Kondo, R. (2009). "Characterization of the oil palm trunk as a material for bio-ethanol production," Mokuzai Gakkashi 55, 346-355.
45. Navi, P., and Girardet, F. (2000). "Effects of thermo-hydro-mechanical treatment on the structure and properties of wood," Holzforschung 53, 287-293.
46. Navi, O., and Heger, F. (2004). "Combined densification and thermo-hydro-mechanical processing of wood," Mrs Bull. 29(5), 332-336.
47. Nordin, K., Jamaludin, M. A., Ahmad, M., Samsi, H. W, Salleh, A. H., and Jallaludin, Z. (2004). "Minimizing the environmental burden of oil palm trunk residues trough the development of laminated veneer lumber products," Manag. Environ. Qual. 15(5), 484-490.
48. Normah, A. M., Mohd Azemi, M. N., Simatupang, M. H., and Manan Dos., A. (1994). "Extraction and characterization of oil palm starch," In: Third National Seminar on Utilization of Oil Palm Tree and other Palms, Kuala Lumpur, Malaysia, pp. 24.
49. Price, E. W. (1976). "Determining tensile properties of sweetgum veneer flakes," Forest Prod. J. 26(10), 50-53.
50. Ratnasingam, J., Ma, T. P., Manikam, M., and Farrokhpayam, S. R. (2008). "Evaluating the machining characteristics of oil palm lumber," Asian J. Appl. Sci. 1, 334-552.
51. Rowell, R. M. (1975). Chemical Modification of Wood: Specialty Treatments, 19, 5-10.
52. Rowell, R. M., and Konkol, P. (1987). "Treatments that enhance physical properties of wood," FPL, General Technical Report FPL-GTR-55, pp.12.
53. Seborg, R. M., Millett, M. A., and Stamm, A. J. (1962). "Heat-stabilized compressed wood (Staypak)," Forest Product Laboratory, United States Department of Agriculture, Forest Service, Report No. 1580 (revised).
54. Shahbazi, A., Li, Y., and Mims, M. R. (2005). "Application of sequential aqueous steam treatments to the fractionation of softwood," Appl. Biochem. Biotech. 121-124, 973-988.
55. Shuit, S. H., Tan, K. T., Lee, K. T., and Kamaruddin, A. H. (2009). "Oil palm biomass as sustainable energy source: A Malaysian case study," Energy 34, 1225-1235.
56. Stamm, A. J., and Seborg, R. M. (1941). "Resin treated, laminated, compressed wood," Trans. Am. Inst. Chem. Eng. 37, 385-397.
57. Sulaiman, O., Hashim, R., Wahab, R., Samsi, H. W., and Mohamed, A. H. (2008). "Evaluation on some finishing properties of oil palm plywood," Holz Roh Werkst 66, 5-10.
58. Sulaiman, O., Salim, N., Hashim, R., Yusof, L. H. M., Razak, W., and Yunus, N. Y. M. (2009). "Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks," Mater Design 30, 3572-3580.
59. Tomme, F., Girardet, F., Gfeller, B., and Navi, P. (1998). "Densified wood: An innovative product with highly enhanced characters," In: World Conference on Timber Engineering (WCTE), Montreux-Lausanne, Switzerland.
60. Unsal, O., Kartal, S. N., Cendan, Z., Avango, R. A., Clausen, C. A., and Green, F. (2009). "Decay and termite resistance, water absorption and swelling of thermally compressed wood panels," Int. Biodeter. Biodegr. 63, 548-552.
61. Wolcott, M. P. (1989). "Modelling viscoelastic cellular materials for the pressing of wood composites," Ph.D. Dissertation, Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (USA).
62. Wong, T. S., Paridah, M. T., Zaidon, A., Edi Suhaimi, B., and Azmi, I. (2008). "Effects of presteaming and compressing pressure on the dimensional stability of densified wood," In: Proc. of National Conference on Forest Product. Kuala Lumpur, Malaysia pp 183-189.