Analysis of brinkman-extended darcy flow in porous media and experimental verification using metal foam

Journal of Fluids Engineering, Transactions of the ASME

Volumn 134, Issue 7, 2012, Pages

  Dukhan, Nihad ^a  

^a UNIVERSITY OF DETROIT MERCY   (United States)

Author keywords

Brinkman; metal foam; porous media; pressure drop; velocity profile

Indexed keywords

ANALYTICAL RESULTS; BRINKMAN; DARCY EQUATIONS; DARCY FLOWS; DARCY NUMBER; DARCY REGIMES; EXPERIMENTAL VERIFICATION; FLOW PARAMETERS; FRICTION FACTORS; IMPERMEABLE BOUNDARY; MAXIMUM VELOCITY; MEAN VELOCITIES; METAL FOAMS; MOMENTUM TRANSPORTS; NEWTONIAN FLUID FLOW; POROUS MEDIUM; POROUS-MEDIA FLOW; PROCESS APPLICATIONS; SOLID BOUNDARIES; VELOCITY PROFILES;

BOUNDARY LAYERS; CHEMICAL REACTORS; FOAMS; GROUNDWATER; METALS; MOMENTUM TRANSFER; POROUS MATERIALS; PRESSURE DROP; RADIOACTIVE WASTES; REYNOLDS NUMBER; WATER POLLUTION; WELDING ELECTRODES;

VELOCITY;

EID: 84863425279     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.4005678     Document Type: Article

References (32)

1. Poulikakos, D., and Renken, K., 1987, "Forced Convection in a Channel Filled With Porous Medium, Including the Effect of Flow Inertia, Variable Porosity, and Brinkman Friction," ASME J. Heat Transfer, 109, pp. 880-888. (Pubitemid 18530806)
2. Amiri, A. and Vafai, K., 1994, "Analysis of Dispersion Effects and Non-Thermal Equilibrium, Non-Darcian, Variable Porosity Incompressible Flow Through Porous Media," Int. J. Heat Mass Transfer, 37(6), pp. 939-954. (Pubitemid 278424)
3. Calmidi, V. V., and Mahajan, R. L., 2000, "Forced Convection in High Porosity Metal Foams," ASME J. Heat Transfer, 122, pp. 557-565.
4. Angirasa, D., 2002, "Forced Convective Heat Transfer in Metallic Fibrous Materials," ASME J. Heat Transfer, 124, pp. 739-745.
5. Nield, D. A., and Bejan, A., 1992, Convection in Porous Media, 2nd ed., Springer, New York, pp. 12.
6. Kaviany, M., 1991, Principal of Heat Transfer in Porous Media, Springer, New York, pp. 52, 70, 94.
7. Vafai, K., and Tien, C. L., 1981, "Boundary and Inertia Effects on Flow and Heat Transfer in Porous Media," Int. J. Heat Mass Transfer, 24(8), pp. 195-203. (Pubitemid 11466463)
8. Yano, H., and Kieda, A., 1991, "The Fundamental Solution of Brinkman's Equation in Two Dimensions," Fluid Dyn. Res., 7, pp. 109-118. (Pubitemid 21680537)
9. Beckermann, C., and Viskanta, R., 1987, "Forced Convection Boundary Layer Flow and Heat Transfer Along a Flat Plate Embedded in a Porous Medium," Int. J. Heat Mass Transfer, 30(7), pp. 1547-1987.
10. Zhao, B. Q., Pantokratoras, A., Fang, T. G., and Liao, S. J., 2010, "Flow of a Weakly Conducting Fluid in a Channel Filled With a Darcy-Brinkman-Forchheimer Porous Medium," Transp. Porous Media, 85, pp. 131-142.
11. Vafai, K., and Kim, S. J., 1989, "Forced Convection in a Channel Filled With a Porous Medium: An Exact Solution," ASMEJ. Heat Transfer, 111, pp. 1103-1106.
12. Vafai, K., and Thiyagaraja, R., 1987, "Analysis of Flow and Heat Transfer at the Interface Region of a Porous Medium," Int. J. Heat Mass Transfer, 30(7), pp. 1391-1405.
13. Poulikakos, D., and Kazmierczak, M., 1987, "Forced Convection in a Duct Partially Filled With a Porous Medium," ASME J. Heat Transfer, 109, pp. 653-662. (Pubitemid 17634203)
14. Haji-Sheikh, A., and Vafai, K., 2004, "Analysis of Flow and Heat Transfer in Porous Media Imbedded Inside Various-Shaped Ducts," Int. J. Heat Mass Transfer, 47, pp. 1889-1905. (Pubitemid 38119505)
15. Minkowycz, W. J., and Haji-Sheikh, A., 2006, "Heat Transfer in Parallel Plates and Circular Porous Passages With Axial Conduction," Int. J. Heat Mass Transfer, 49(13-14), pp. 2381-2390.
16. Du Plassis, P. Montillet, A. Comiti, J., and Legrand, J., 1994, "Pressure Drop Prediction for Flow Through High Porosity Metallic Foam," Chem. Eng. Sci., 49(21), pp. 3545-3553. (Pubitemid 288440)
17. Fourie, J. G., and Du Plassis, J. P., 2002, "Pressure Drop Modeling in Cellular Metallic Foams," Chem. Eng. Sci., 57, pp. 2781-2789. (Pubitemid 34923452)
18. Bhattacharya, A., Calmidi, V. V., andMahajan, R. L., 2002, "Thermophysical Properties of High PorosityMetal Foams," Int. J. Heat Mass Transfer, 45, pp. 1017-1031. (Pubitemid 34043287)
19. Despois, J.-F., and Mortensen, A., 2005, "Permeability of Open-Pore Microcellular Materials," Acta Mater., 53, pp. 1381-1388. (Pubitemid 40200578)
20. Krishnan, S., Murthy, J. Y., and Garimella, S. V., 2006, "Direct Simulation of Transport in Open-Cell Metal Foams," ASME J. Heat Transfer, 128, pp. 793-799. (Pubitemid 44965664)
21. Bodla, K. K., Murthy, J. Y., and Garimella, S. V., 2010, "Microtomography-Based Simulation of Transport Through Open-Cell Metal Foams," Numer. Heat Transfer, Part A, 58, pp. 527-544.
22. Antohe, B. V., Lage, J. L., Price, D. C., and Weber, R. M., 1997, "Experimental Determination of Permeability and Inertia Coefficients of Mechanically Compressed Aluminum Porous Matrices," ASME J. Fluids Eng., 119, pp. 404-411.
23. Lage, J. L., Antohe, B. V., and Nield, D. A., 1997, "Two Types of Nonlinear Pressure-Drop Versus Flow-Rate Relation Observed for Saturated Porous Media," ASME J. Fluids Eng., 119, pp. 700-706. (Pubitemid 127557526)
24. Paek, J. W., Kang, B. H., Kim, S. Y., and Hyun, J. M., 2000, "Effective Thermal Conductivity and Permeability of Aluminum Foam Materials," Int. J. Thermophys., 21(2), pp. 453-464.
25. Kim, S. Y., Paek, J. W., and Kang, B. H., 2000, "Flow and Heat Transfer Correlations for Porous Fin in Plate-Fin Heat Exchanger," ASME J. Heat Transfer, 122, pp. 572-578.
26. Liu, J. F., Wu, W. T., Chiu, W. C., and Hsieh, W. H., 2006, "Measurement and Correlation of Friction Characteristic of Flow Through Foam Matrixes," Exp. Therm. Fluid Sci., 30, pp. 329-226.
27. Myers, G. E., 1998, Analytical Methods in Conduction Heat Transfer, 2nd ed., AMCHT Publications, Madison, WI, pp. 46.
28. Dukhan, N., and Patel, K., 2011, "Effect of Sample's Length on Flow Properties of Open-Cell Metal Foam and Pressure-Drop Correlations," J. Porous Mater., 18(6), pp. 655-665.
29. Bonnet, J.-P., Topin, F., and Tadrist, L., 2008, "Flow Laws in Metal Foams: Compressibility and Pore Size Effects," Transp. Porous Media, 73, pp. 233-254. (Pubitemid 351596037)
30. Figliola, R., and Beasley, D., 2000, Theory and Design for Mechanical Measurements, John Wiley and Sons, New York, pp. 149-163.
31. White, F. M., 2003, Fluid Mechanics, 5th ed., McGraw-Hill, New York, pp. 771.
32. Boomsma, K., and Poulikakos, D., 2002, "The Effect of Compression and Pore Size Variations on the Liquid Flow Characteristics in Metal Foams," ASME J. Fluids Eng., 124, pp. 263-272. (Pubitemid 40000448)