Copper emission during thermal treatment of simulated copper sludge

Environmental Technology

Volumn 33, Issue 1, 2012, Pages 17-25

  Chou, Jing Dong ^a   Lin, Chiou Liang ^b   Hsien, Yi Lin ^a   Wey, Ming Yen ^a   Chang, Shih Hsien ^c,d  

^a NATIONAL CHUNG HSING UNIVERSITY   (Taiwan)

^b NATIONAL UNIVERSITY OF KAOHSIUNG   (Taiwan)

^c CHUNG SHAN MEDICAL UNIVERSITY   (Taiwan)

^d CHUNG SHAN MEDICAL UNIVERSITY HOSPITAL   (Taiwan)

Author keywords

copper; emission; rotary kiln; sintering; sludge

Indexed keywords

AIR POLLUTION; GASES; LEACHING; NEUTRON EMISSION; PARTICULATE EMISSIONS; ROTARY KILNS; SCANNING ELECTRON MICROSCOPY; SINTERING;

COPPER CONTENT; COPPER LEACHING; GAS PHASIS; OPERATING CONDITION; OPERATING PARAMETERS; ROTARY SPEED; SLUDGE; TOXICITY CHARACTERISTIC LEACHING PROCEDURES; TREATMENT TEMPERATURE;

COPPER;

COPPER;

COPPER; GAS PHASE REACTION; HIGH TEMPERATURE; LEACHING; SCANNING ELECTRON MICROSCOPY; SLUDGE; THERMAL ALTERATION; TOXICITY;

AIR POLLUTION; AIRBORNE PARTICLE; ARTICLE; CHEMICAL COMPOSITION; GAS; GOVERNMENT REGULATION; HEATING; LEACHING; SCANNING ELECTRON MICROSCOPY; SIMULATION; SINTERING; SLUDGE; TAIWAN; TEMPERATURE; TOXICITY CHARACTERISTIC LEACHING PROCEDURE; VELOCITY;

TAIWAN;

EID: 84863170782     PISSN: 09593330     EISSN: 1479487X     Source Type: Journal    
DOI: 10.1080/09593330.2010.490853     Document Type: Article

References (20)

1. Stefanowicz, T., Osiska, M., and, Napieralska-Zagozda, S. 1997. Copper recovery by the cementation method. Hydrometallurgy, 47: 69-90. (Pubitemid 127413013)
2. Chang, C. J., and, Liu, J. C. 1998. Feasibility of copper leaching from an industrial sludge using ammonia solutions. J. Hazard. Mater., 58: 121-132. (Pubitemid 28327235)
3. Narayanan, R., and, Sreekrishnan, T. R. 2009. A two-stage process for simultaneous thermophilic sludge digestion, pathogen control and metal leaching. Environ. Technol., 30: 21-26.
4. Pereira, C. F., Rodrguez-Piero, M., and, Vale, J. 2001. Solidification/stabilization of electric arc furnace dust using coal fly ash: Analysis of the stabilization process. J. Hazard. Mater., 82: 183-195. (Pubitemid 32166761)
5. Shi, C., and, Fernández-Jiménez, A. 2006. Stabilization/solidification of hazardous and radioactive wastes with alkali-activated cements. J. Hazard. Mater., 137: 1656-1663. (Pubitemid 44427999)
6. Zhang, X. Y., Wang, Q. C., Zhang, S. Q., Sun, X. J., and, Zhang, Z. S. 2009. Stabilization/solidification (S/S) of mercury-contaminated hazardous wastes using thiolfunctionalized zeolite and Portland cement. J. Hazard. Mater., 168: 1575-1580.
7. Singh, I. B., Chaturvedi, K., Morchhale, R. K., and, Yegneswaran, A. H. 2007. Thermal treatment of toxic metals of industrial hazardous wastes with fly ash and clay. J. Hazard. Mater., 141: 215-222.
8. Hoffmann, G., Schirmer, M., Bilitewski, B., and, Kaszás/Savos, M. 2007. Thermal treatment of hazardous waste for heavy metal recovery. J. Hazard. Mater., 145: 351-357. (Pubitemid 46938619)
9. Mangialardi, T. 2001. Sintering of MSW fly ash for reuse as a concrete aggregate. J. Hazard. Mater., 87: 225-239. (Pubitemid 32826294)
10. Obrador, A., Rico, M. I., Alvarez, J. M., and, Novillo, J. 2001. Influence of thermal treatment on sequential extraction and leaching behaviour of trace metals in a contaminated sewage sludge. Bioresour. Technol., 76: 259-264.
11. Singh, I. B., Chaturvedi, K., and, Yegneswaran, A. H. 2007. Thermal immobilization of Cr, Cu and Zn of galvanizing waste in the presence of clay and fly ash. Environ. Technol., 28: 713-721. (Pubitemid 47189013)
12. Stasta, P., Boran, J., Bebar, L., Stehlik, P., and, Oral, J. 2006. Thermal processing of sewage sludge. Appl. Therm. Eng., 26: 1420-1426.
13. Merino, I., Arévalo, L. F., and, Romero, F. 2007. Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives. Waste Manage., 27: 1829-1844. (Pubitemid 47451753)
14. Ribeiro, M. J., Tulyaganov, D. U., Ferreira, J. M., and, Labrincha, J. A. 2002. Recycling of Al-rich industrial sludge in refractory ceramic pressed bodies. Ceram. Int., 28: 319-326. (Pubitemid 34222510)
15. Laursen, K., White, T. J., Cresswell, D. J.F., Wainwright, P. J., and, Barton, J. R. 2006. Recycling of an industrial sludge and marine clay as light-weight aggregates. J. Environ. Manage., 80: 208-213. (Pubitemid 43947859)
16. Benzaazoua, M., Fiset, J. F., Bussière, B., Villeneuve, M., and, Plante, B. 2006. Sludge recycling within cemented paste backfill: Study of the mechanical and leachability properties. Miner. Eng., 19: 420-432. (Pubitemid 43254895)
17. Lin, K. L., and, Chen, B. Y. 2007. Dose-mortality assessment upon reuse and recycling of industrial sludge. J. Hazard. Mater., 148: 326-333.
18. Wey, M. Y., Liu, K. Y., Tsai, T. H., and, Chou, J. T. 2006. Thermal treatment of the fly ash from municipal solid waste incinerator with rotary kiln. J. Hazard. Mater., 137: 981-989.
19. Chou, J. D., Wey, M. Y., and, Chang, S. H. 2008. Emission of Pb and PAHs from thermally co-treated MSWI fly ash and bottom ash process. J. Hazard. Mater., 150: 27-36.
20. Chen, J. C., Wey, M. Y., Yen, C. L., and, Liang, Y. S. 2004. Simultaneous treatment of organic compounds, CO, and NOx in the incineration flue gas by three-way catalyst. Appl. Catal. B, 48: 25-35.