Homogenization of dimpled tube and its application to structural integrity evaluation for a dimple-type EGR cooler using FEM

International Journal of Precision Engineering and Manufacturing

Volumn 13, Issue 2, 2012, Pages 183-191

  Seo, Young Ho ^a   Lee, Hyun Min ^b   Jeon, Sang Kwang ^c   Ku, Tae Wan ^a   Kang, Beom Soo ^a   Kim, Jeong ^a  

^a Pusan National University   (South Korea)

^b Doosan Heavy Industries and Construction Co Ltd   (South Korea)

^c Part and Component Division   (South Korea)

Author keywords

Dimple type EGR (exhaust gas recirculation) cooler; Equivalent material property; Finite element analysis; Heat exchange efficiency; Homogenization method

Indexed keywords

EID: 84863146022     PISSN: 12298557     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12541-012-0023-5     Document Type: Article

References (20)

1. Jeong, H. S., Cho, J. R., Oh, J. S., Kim, E. N., Choi, S. G. and Ha, M. Y., "Inertia Friction Welding Process Analysis and Mechanical Properties Evaluation of Large Rotor Shaft in Marine Turbo Charger," Int. J. Precis. Eng. Manuf., Vol. 11, No. 1, pp. 83-88, 2010.
2. Cheng, C. H., Cheung, C. S., Chan, T. L., Lee, S. C. and Yao, C. D., "Experimental investigation on the performance, gaseous and particulate emissions of a methanol fumigated diesel engine," Sci. Total Environ., Vol. 389, No. 1, pp. 115-124, 2008.
3. Broatch, A., Lujan, J. M., Serrano, J. R. and Pla, B., "A procedure to reduce pollutant gases from Diesel combustion during European MVEG-A cycle by using electrical intake airheaters," Fuel, Vol. 87, No. 12, pp. 2760-2778, 2008.
4. Abu-Hamdeh, N. H., "Effect of cooling the recirculated exhaust gases on diesel engine emissions," Energy Conv. Manag., Vol. 44, No. 19, pp. 3113-3124, 2003.
5. Ghobadian, B., Rahimi, H., Nikbakht, A. M., Najafi, G. and Yusaf, T. F., "Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network," Renew. Energy, Vol. 34, No. 4, pp. 976-982, 2009.
6. Benjumea, P., Agudelo, J. and Agudelo, A., "Effect of altitude and palm oil biodiesel fuelling on the performance and combustion characteristics of a HSDI diesel engine," Fuel, Vol. 88, No. 4, pp. 725-731, 2009.
7. Bajpai, S., Sahoo, P. K. and Das, L. M., "Feasibility of blending karanja vegetable oil in petro-diesel and utilization in a direct injection diesel engine," Fuel, Vol. 88, No. 4, pp. 705-711, 2009.
8. Peng, H., Cui, Y., Shi, L. and Deng, K., "Effects of exhaust gas recirculation (EGR) on combustion and emissions during cold start of direct injection (DI) diesel engine," Energy, Vol. 33, No. 3, pp. 471-479, 2008.
9. Saravanana, N. and Nagarajanb, G. "An experimental investigation on performance and emissions study with port injection using diesel as an ignition source for different EGR flow rates," Int. J. Hydrog. Energy, Vol. 33, No. 16, pp. 4456-4462, 2008.
10. Shi, L., Cui, Y., Deng, K., Peng, H. and Chen, Y., "Study of low emission homogeneous charge compression ignition (HCCI) engine using combined internal and external exhaust gas recirculation (EGR)," Energy, Vol. 31, No. 14, pp. 2665-2676, 2006.
11. Seo, Y. H., Heo, S. C., Ku, T. W., Kim, J. and Kang, B. S., "Development and Performance Estimation of an Exhaust Gas Recirculation Cooler with Dimpled Rectangular Tubes," J. Eng. Manuf., Vol. 225, No. 3, pp. 384-397, 2011.
12. Huyse, L. and Maes, M. A., "Random field modeling of elastic properties using homogenization," J. Eng. Mech., Vol. 127, No.1, pp. 27-36, 2001.
13. Park, S. K., Kim, J., Chang, Y. C. and Kang, B. S., "Analysis of the deformation of a perforated sheet under thermal and tension load using finite element method," J. Mater. Process. Technol., Vol. 113, No. 1-3, pp. 761-765, 2001.
14. Ostoja-Starzewski, M., "Microstructural randomness versus representative volume element in thermomechanics," J. Applied Mech., Vol. 69, No. 1, pp. 25-35, 2002.
15. Wang, M. and Pan, N., "Predictions of effective physical properties of complex multiphase materials," Mater. Sci. Eng. R: Reports, Vol. 63, No. 1, pp. 1-30, 2008.
16. Sakata, S., Ashida, F., Kojima, T. and Zako, M., "Threedimensional stochastic analysis using a perturbation based homogenization method for elastic properties of composite material considering microscopic uncertainty," Int. J. Solids Struct., Vol. 45, No. 3-4, pp. 894-907, 2008.
17. Milhans, J., Ahzi, S., Garmestani, H., Khaleel, M. A., Sun, X. and Koeppel, B. J., "Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials," Mater. Design, Vol. 30, No. 5, pp. 1667-1673, 2009.
18. Bobzin, K., Bagcivan, N., Parkot, D. and Kashko, T., "Calculation of effective properties of textile reinforced aluminum alloy by a two-step homogenization procedure," Computational Mater. Sci., Vol. 47, No. 3, pp. 801-806, 2010.
19. Holland, F. A., Moores, R. M., Watson, F. A. and Wilkinson, J. K., "Heat transfer," Heinemann Educational Books Ltd., 1970.
20. Asami, K. and Hashimoto, K., "Importance of initial surface film in the degradation of stainless steels by atmospheric exposure," Corrosion Sci., Vol. 45, No. 10, pp. 2263-2283, 2003.