Influence of nonideal voltage measurement on parameter estimation in permanent-magnet synchronous machines

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 6, 2012, Pages 2438-2447

  Liu, Kan ^a   Zhu, Z Q ^a   Zhang, Qiao ^b   Zhang, Jing ^c  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

^b HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^c HUNAN UNIVERSITY   (China)

Author keywords

Inverters; Magnetic flux linkage; Neural networks (NNS); Parameter estimation; Permanent magnet machines; Rotors; Stators; System identification

Indexed keywords

DC-BUS VOLTAGES; EXPERIMENTAL ANALYSIS; INVERTER NONLINEARITY COMPENSATIONS; LOAD VARIATIONS; LOW SPEED; MACHINE PARAMETERS; MAGNETIC FLUX LINKAGE; NONIDEAL; PERMANENT MAGNET SYNCHRONOUS MACHINES; PERMANENT-MAGNET MACHINES; Q-AXIS INDUCTANCE; ROTOR FLUX LINKAGE; STATOR WINDING; SYSTEM IDENTIFICATIONS; VOLTAGE SOURCE INVERTER; WINDING RESISTANCES; ZERO-SHIFT;

ELECTRIC INVERTERS; ELECTRIC RESISTANCE; ESTIMATION; INDUCTANCE; MAGNETIC FLUX; ROTORS; ROTORS (WINDINGS); STATORS; SYNCHRONOUS MACHINERY; VOLTAGE MEASUREMENT;

PARAMETER ESTIMATION;

EID: 84863131814     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2162214     Document Type: Article

References (35)

1. T. Orlowska-Kowalska and M. Dybkowski, "Stator-current-based MRAS estimator for a wide range speed-sensorless induction-motor drive, " IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1296-1308, Apr. 2010.
2. M. S. Zaky, M. M. Khater, S. S. Shokralla, and H. A. Yasin, "Parameter identification scheme of sensorless induction motor drives, " IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1699-1707, May 2009.
3. S. Rao, M. Buss, and V. Utkin, "Simultaneous state and parameter estimation in induction motors using first- and second-order sliding modes, " IEEE Trans. Ind. Electron., vol. 56, no. 9, pp. 3369-3376, Sep. 2009.
4. B. N. Mobarakeh, F. Meibody-Tabar, and F. M. Sargos, "Mechanical sensorless control of PMSM with online estimation of stator resistance, " IEEE Trans. Ind. Appl., vol. 40, no. 2, pp. 457-471, Mar./Apr. 2004.
5. M. Rashed, P. F. A. MacConnell, A. F. Stronach, and P. Acarnley, "Sensorless indirect-rotor-field-orientation speed control of a permanent-magnet synchronous motor with stator-resistance estimation, " IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1664-1675, Jun. 2007.
6. L. Liu and D. A. Cartes, "Synchronisation based adaptive parameter identification for permanent magnet synchronous motors, " IET Control Theory Appl., vol. 1, no. 4, pp. 1015-1022, Jul. 2007. (Pubitemid 46990258)
7. T. Senjyu, K. Kinjo, N. Urasaki, and K. Uezato, "Parameter measurement for PMSM using adaptive identification, " in Proc. IEEE Int. Symp. Ind. Electron., 2002, vol. 3, pp. 711-716.
8. S. Bolognani, M. Zigliotto, and K. Unterkofler, "On-line parameter commissioning in sensorless PMSM drives, " in Proc. IEEE Int. Symp. Ind. Electron., 1997, vol. 2, pp. 480-484.
9. S. Ichikawa, M. Tomita, S. Doki, and S. Okuma, "Sensorless control of permanent-magnet synchronous motors using online parameter identification based on system identification theory, " IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 363-372, Apr. 2006.
10. S. Underwood and I. Husain, "On-line parameter estimation and adaptive control of permanent magnet synchronous machines, " IEEE Trans. Ind. Electron., vol. 57, no. 7, pp. 2435-2443, Jun. 2010.
11. Z. Gao, R. S. Colby, L. Turner, and B. Leprettre, "Filter design for estimating parameters of induction motors with time-varying loads, " IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1518-1529, May 2011.
12. K. Liu, Q. Zhang, J. T. Chen, Z. Q. Zhu, J. Zhang, and A.W. Shen, "Online multi-parameter estimation of non-salient pole PMsynchronous machines with temperature variation tracking, " IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1776-1788, May 2011.
13. Z. Q. Zhu, X. Zhu, and P. D. Sun, "Estimation of winding resistance and PM flux-linkage in brushless AC machines by reduced-order extended Kalman filter, " in Proc. IEEE Int. Conf. Netw., Sens. Control, 2007, pp. 740-745. (Pubitemid 47468884)
14. K. W. Lee, D. H. Jung, and I. J. Ha, "An online identification method for both stator resistance and back-EMF coefficient of PMSMs without rotational transducers, " IEEE Trans. Ind. Electron., vol. 51, no. 2, pp. 507- 510, Apr. 2004.
15. M. A. Jabbar, J. Dong, and Z. Liu, "Determination of machine parameters for internal permanent magnet synchronous motors, " in Proc. Power Electron., Mach. Drives, 2004, vol. 2, pp. 805-810. (Pubitemid 40495940)
16. U. Schaible and B. Szabados, "Dynamic motor parameter identification for high speed flux weakening operation of brushless permanent magnet synchronous machines, " IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 486-492, Sep. 1999. (Pubitemid 30528614)
17. D. Reigosa, F. Briz, P. Gacia, J. M. Guerrero, and M.W. Degner, "Magnet temperature estimation in surface PM machines using high-frequency signal injection, " IEEE Trans. Ind. Appl., vol. 46, no. 4, pp. 1468-1475, Jul./Aug. 2010.
18. A. Piippo, M. Hinkkanen, and J. Luomi, "Adaptation of motor parameters in sensorless PMSM drives, " IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 203-212, Jan./Feb. 2009.
19. A. Bechouche, H. Sediki, D. O. Abdeslam, and S. Haddad, "Identification of induction motor at standstill using artificial neural network, " in Proc. 36th Annu. Conf. IEEE Ind. Electron. Soc., 2010, pp. 2908-2913.
20. M. K. Mishra and K. Karthikeyan, "An investigation on design and switching dynamics of a voltage source inverter to compensate unbalanced and nonlinear loads, " IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 2802- 2810, Aug. 2009.
21. R. Raute, C. Caruana, and C. S. Staines, "Analysis and compensation of inverter nonlinearity effect on a sensorless PMSM drive at very low and zero speed operation, " IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4065-4074, Dec. 2010.
22. M. F. Iacchetti, "On line tuning of the stator inductance in a MRAS observer for sensorless DFIM drives, " in Proc. 19th ICEM, 2010, pp. 1-6.
23. Y. C. Shi, K. Sun, H. Y. Ma, and L. P. Huang, "Permanent magnet flux identification of IPMSM based on EKF with speed sensorless control, " in Proc. 36th Annu. Conf. IEEE Ind. Electron. Soc., 2010, pp. 2252-2257.
24. S. Morimoto, M. Sanada, and Y. Yakeda, "Mechanical sensorless drives of IPMSM with online parameter identification, " IEEE Trans. Ind. Appl., vol. 42, no. 5, pp. 1241-1248, Sep./Oct. 2006. (Pubitemid 44500758)
25. J.W. Choi and S. K. Sul, "A new compensation strategy reducing voltage/current distortion in PWM VSI systems operating with low output voltages, " IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1001-1008, Sep. 1995.
26. J. W. Choi and S. K. Sul, "Inverter output voltage synthesis using novel dead time compensation, " IEEE Trans. Power Electron., vol. 11, no. 2, pp. 221-227, Mar. 1996.
27. R. Munoz and T. A. Lipo, "On-line dead-time compensation technique for open-loop PWM-VSI drives, " IEEE Trans. Power Electron., vol. 14, no. 4, pp. 683-689, Jul. 1999.
28. H. S. Kim, K. H. Kim, and M. J. Youn, "On-line dead-time compensation method based on time delay control, " IEEE Trans. Control Syst. Technol., vol. 11, no. 2, pp. 279-285, Mar./Apr. 2003.
29. H. W. Kim, H. S. Kim, M. J. Youn, and K. W. Cho, "On-line observation and compensation of voltage distortion in PWM VSI for PMSM, " Proc. Inst. Elect. Eng.-B, Electron. Power Appl., vol. 151, no. 5, pp. 534-542, Sep. 2004.
30. H. W. Kim, M. J. Youn, K. Y. Cho, and H. S. Kim, "Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty, " IEEE Trans. Control Syst. Technol., vol. 14, no. 4, pp. 589-601, Jul. 2006.
31. H. W. Kim, M. J. Youn, and K. Y. Cho, "New voltage distortion observer of PWM VSI for PMSM, " IEEE Trans. Ind. Electron., vol. 52, no. 4, pp. 1188-1192, Aug. 2005.
32. S. Y. Kim, W. Lee, M. S. Rho, and S. Y. Park, "Effective dead-time compensation using a simple vectorial disturbance estimator in PMSM drives, " IEEE Trans. Ind. Electron., vol. 57, no. 5, pp. 1609-1614, May 2010.
33. Y. Nakamura, H. Funato, and S. Ogasawara, "Compensation of output voltage distortion analysis of PWM inverter with LC filter caused by device voltage drop, " in Proc. Eur. Conf. Power Electron. Appl., Sep. 2007, pp. 1-9.
34. H. S. Ryu, I. H. Lim, J. H. Lee, S. H. Hwang, and J. M. Kim, "A dead time compensation method in voltage-fed PWM inverter, " in Conf. Rec. 41st IEEE IAS Annu. Meeting, Oct. 2006, vol. 2, pp. 911-916.
35. S. H. Hwang and J. M. Kim, "Dead time compensation method for voltage-fed PWM inverter, " IEEE Trans. Energy Convers., vol. 25, no. 1, pp. 1-10, Mar. 2010.