Nanocrystalline cellulose prepared from softwood kraft pulp via ultrasonic-assisted acid hydrolysis

BioResources

Volumn 6, Issue 4, 2011, Pages 4271-4281

  Li, Wei ^a   Wang, Rui ^a   Liu, Shouxin ^a  

^a NORTHEAST FORESTRY UNIVERSITY   (China)

Author keywords

Acid Hydrolysis; Nanocrystalline cellulose (NCC); Pulp; Ultrasonication

Indexed keywords

ACID HYDROLYSIS; AVERAGE LENGTH; BLEACHED SOFTWOOD KRAFT PULP; CHAR YIELD; COMBINED METHOD; CRYSTALLINITIES; FREE END; HIGH CRYSTALLINITY; NANOCRYSTALLINE CELLULOSE; ROD-SHAPED; SCANNING ELECTRONS; SMALL PARTICLE SIZE; SOFTWOOD KRAFT PULPS; SURFACE CHEMICALS; SURFACE EROSION; TEMPERATURE RANGE; THERMAL BEHAVIORS; ULTRA-SONICATION;

CELLULOSE; CELLULOSE DERIVATIVES; CRYSTAL STRUCTURE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HYDROLYSIS; KRAFT PROCESS; PULP; PYROLYSIS; SCANNING ELECTRON MICROSCOPY; SOFTWOODS; SURFACE STRUCTURE; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

KRAFT PULP;

ACIDOLYSIS; CELLULOSE; CELLULOSE DERIVATIVES; CRYSTAL STRUCTURE; FOURIER ANALYSIS; GRAVIMETRY; INFRARED SPECTROSCOPY; KRAFT PULPS; PYROLYSIS; SCANNING ELECTRON MICROSCOPY; THERMAL ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

EID: 84863067903     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (38)

1. Araki, J., and Kuga, S. (2001). "Effect of trace electrolyte on liquid crystal type of cellulose microcrystals," Langmuir 17(15), 4493-4496.
2. Araki, J., Wada, M., Kuga, S., and Okano, T. (1999). "Influence of surface charge on viscosity behavior of cellulose microcrystal suspension," J. Wood Sci. 45(3), 258-261.
3. Bai, W., Holbery, J., and Li, K.C. (2009). "A technique for production of nanocrystalline cellulose with a narrow size distribution," Cellulose 16(3), 455-465.
4. Beck-Candanedo, S., Roman, M., and Gray, D. G. (2005). "Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions," Biomacromolecules 6(2), 1048-1054.
5. Bhatnagar, A., and Sain, M. J. (2005). "Processing of cellulose nanofiber-reinforced composites," J. Reinf. Plast. Comp. 24(12), 1259-1268.
6. Bondeson, D., Mathew, A., and Oksman, K. (2006). "Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis," Cellulose 13(2), 171-180.
7. Caruso, M. M., Davis, D. A., Shen, Q. L., Odom, S. A., Sottos, N. R., White, S. R., and Moore, J.S. (2009). "Mechanically-induced chemical changes in polymeric materials," Chem. Rev. 109(11), 5755-5798.
8. Chen, W. S., Yu, H. P., Liu, Y. X., Chen, P., Zhang, M. X., and Hai, Y. F. (2011). "Individualization of cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments," Carbohydr. Polym. 83, 1804-1811.
9. Cheng, Q. Z., Wang, S. Q., and Han, Q. Y. (2010). "Novel process for isolating fibrils from cellulose fibers by high-intensity ultrasonication. II. fibril characterization," J. Appl. Polym. Sci., 2010, 115, 2756-2762.
10. Cintas, P., and Luche, J. L. (1999). "Green chemistry: The sonochemical approach," Green Chem. 1(3), 115-125.
11. Dong, X. M., Revol, J. F., and Gray, D. G. (1998). "Effect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose," Cellulose 5(1), 19-32.
12. Dujardin, E., Blaseby, M., and Mann, S. (2003). "Synthesis of mesoporous silica by solgel mineralisation of cellulose nanorod nematic suspensions," J. Mater. Chem. 13(4), 696-699.
13. Favier, V., Chanzy, H., and Cavaille, J. Y. (1995). "Polymer nanocomposites reinforced by cellulose whiskers," Macromolecules 28(18), 6365-6367.
14. Filson, P. B., and Dawson-Andoh, B. E. (2009). "Sono-chemical preparation of cellulose nanocrystals from lignocellulose derived materials," Bioresour. Technol. 100(7), 2259-2264.
15. Fleming, K., Gray, D. G., and Matthews, S. (2001). "Cellulose crystallites," Chem. Eur. J. 7(9), 1831-1835.
16. Frone, A. N., Panaitescu, D. M., Donescu, D., Spataru, C. I., Radovici, C., Trusca, R., and Somoghi, R. (2011). "Preparation and characterization of PVA composites with cellulose nanofibers obtained by ultrasonication," BioResources 6(1), 487-512.
17. Habibi, Y., Lucia, L. A., and Rojas, O. J. (2010). "Cellulose nanocrystals: Chemistry, self-assembly, and applications," Chem. Rev. 110(6), 3479-3500.
18. Helbert, W., Cavaille, J. Y., and Dufresne, A. (1996). "Thermoplastic nanocomposites filled with wheat straw cellulose whiskers. Part I: Processing and mechanical behavior," Polym. Compos. 17(4), 604-611.
19. Huang, C. L. (1995). "Revealing fibril angle in wood sections by ultrasonic treatment," Wood Fiber Sci. 27 (1), 49-54.
20. Hubbe, M. A., Rojas, O. J., Lucia, L. A., and Sain, M. (2008). "Cellulosic nanocomposites: A review," BioResources 3(3), 929-980.
21. Iwamoto, S., Nakagaito, A. N., Yano, H., and Nogi, M. (2005). "Optically transparent composites reinforced with plant fiber-based nanofibers," Appl. Phys. A. 81(6), 1109-1112.
22. Iwamoto, S., Nakagaito, A. N., and Yano, H. (2007). "Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites," Appl. Phys. A. 89(2), 461-466.
23. Kim, D. Y., Nishiyama, Y., Wada, M., and Kuga, S. (2001). "High-yield carbonization of cellulose by sulfuric acid impregnation," Cellulose 8(1), 29-33.
24. Lima, M. M. D. S., and Borsali, R. (2004). "Rodlike cellulose microcrystals: Structure, properties, and applications," Macromol. Rapid Commun. 25(7), 771-787.
25. Lindley, J., Mason, T. J., and Lorimer, J. P. (1987). "Sonochemically enhanced Ullmann reactions," Ultrasonicis 25(1), 45-48.
26. Li, Q. Q., and Renneckar, S. (2009). "Molecularly thin nanoparticles from cellulose: Isolation of sub-microfibrillar structures," Cellulose 16(6), 1025-1032.
27. Li, R., Fei, J., Cai, Y., Li, Y., Feng, J., and Yao, J. (2009). "Cellulose whiskers extracted from mulberry: A novel biomass production," Carbohydr. Polym. 76(1), 94-99.
28. Moran, J. I., Alvarez, V. A., Cyras, V. P., and Vazquez, A. (2008). "Extraction of cellulose and preparation of nanocellulose from sisal fibers," Cellulose 15(1), 149-159.
29. Norman, J. C., Sell, N. J., and Danielske, M. (1994). "Deinking laser-print paper using ultrasound," Tappi 77(3), 151-158.
30. Revol, J. F., Bradford, H., Giasson, J., Marchessault, R. H., and Gray, D. G. (1992). "Helicoidal self-ordering of cellulose microfibrils in aqueous suspension," Int. J. Biol. Macromol. 14(3), 170-172.
31. Roman, M., and Winter, W. T. (2004). "Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose," Biomacromolecules 5(5), 1671-1677.
32. Ruiz, M. M., Cavaille, J. Y., Dufresne, A., Graillat, C., and Gerard, J. F. (2001). "New waterborne epoxy coatings based on cellulose nanofillers," Macromol. Symp. 169(1), 211-222.
33. Suslick, K. S., Choe, S. B., Cichowlas, A. A., and Grinstaff, M. W. (1991). "Sonochemical synthesis of amorphous iron," Nature 353, 414-416.
34. Suslick, K. S., Goodale, J. W., Schubert, P. F., and Wang, H. H. (1983). "Sonochemistry and sonocatalysis of metal carbonyls," J. Am. Chem. Soc. 105(18), 5781-5785.
35. Suslick, K. S., Schubert, P. F., and Goodale, J. W. (1981). "Sonochemistry and sonocatalysis of iron carbonyls," J. Am. Chem. Soc. 103 (24), 7342-7344.
36. Tang, A. M., Zhang, H. W., Chen, G., Xie, G. H., and Liang, W. Z. (2005). "Influence of ultrasound treatment on accessibility and regioselective oxidation reactivity of cellulose," Ultrason. Sonochem. 12(6), 467-472.
37. Wang, N., Ding, E. Y., and Cheng, R. S. (2007). "Thermal degradation behaviors of spherical cellulose nanocrystals with sulfate groups," Polymer 48(12), 3486-3493.
38. Wegner, T. H., and Jones, P. E. (2006). "Advancing cellulose-based nanotechnology," Cellulose 13(2), 115-118.